1.2 KiB
1.2 KiB
Description
This is a patch of Marlin by ErikZalm (https://github.com/ErikZalm/Marlin) that adds probing command (G30) with the functions developed by larsbrubaker (https://github.com/ErikZalm/Marlin/pull/323)
The changes made (marked as CGS MOD) are hereby released on the public domain.
Quick Information
You must setup two endstops for the Z axis, the lower one is considered our "probe"
Pin definitions (from "pins.h")
// We are using the Z_MIN endstop as a probe
// Also, we have our Z_MAX endstop to limit the vertical movement of the spindle
#define Z_PROBE_PIN 27 // using Sanguinololu, pin 36 (D27) , labeled A4
#define Z_PROBE_HIT_VALUE 0 // Switch this if your probe gives an inverted value
Disclaimer
This hardware/software is provided “as is," and you use the hardware/software at your own risk. Under nocircumstances shall Carlosgs be liable for direct, indirect, special, incidental, or consequential damages resulting from the use, misuse, or inability to use this hardware/software, even if Carlosgs has been advised of the possibility of such damages.