History

Carlos Garcia Saura e206e24791 Repository re-organisation		2013-09-27 01:08:41 +02:00
..
ArduinoAddons	Repository re-organisation	2013-09-27 01:08:41 +02:00
Marlin	Repository re-organisation	2013-09-27 01:08:41 +02:00
libraries	Repository re-organisation	2013-09-27 01:08:41 +02:00
.gitignore	Repository re-organisation	2013-09-27 01:08:41 +02:00
README.md	Repository re-organisation	2013-09-27 01:08:41 +02:00

README.md

Description

This is a patch of Marlin by ErikZalm (https://github.com/ErikZalm/Marlin) that adds probing command (G30) with the functions developed by larsbrubaker (https://github.com/ErikZalm/Marlin/pull/323)

The changes made (marked as CGS MOD) are hereby released on the public domain.

Quick Information

You must setup two endstops for the Z axis, the lower one is considered our "probe"

Pin definitions (from "pins.h")

  
// We are using the Z_MIN endstop as a probe  
// Also, we have our Z_MAX endstop to limit the vertical movement of the spindle  
#define Z_PROBE_PIN 27  // using Sanguinololu, pin 36 (D27) , labeled A4  
#define Z_PROBE_HIT_VALUE 0 // Switch this if your probe gives an inverted value

Disclaimer

This hardware/software is provided “as is," and you use the hardware/software at your own risk. Under nocircumstances shall Carlosgs be liable for direct, indirect, special, incidental, or consequential damages resulting from the use, misuse, or inability to use this hardware/software, even if Carlosgs has been advised of the possibility of such damages.