Carlos Garcia Saura
|
c12d10b555
|
Vertical Z smooth rod holes made smaller so they fit tight
|
2013-08-05 15:54:22 -07:00 |
|
Carlos Garcia Saura
|
4ab1d66a2a
|
Added flat DXFs for milling/cutting the frames instead of printing (as proposed by Xander in the mail list)
|
2013-08-02 22:13:01 -07:00 |
|
Carlos Garcia Saura
|
b5333268e1
|
Added Y_rod_idler mirrored (thanks Mike!)
|
2013-08-02 11:42:58 -07:00 |
|
Carlos Garcia Saura
|
2727cdb2f3
|
Merge branch 'master' of ssh://github.com/carlosgs/Cyclone-PCB-Factory
|
2013-07-29 11:35:33 -07:00 |
|
Carlos Garcia Saura
|
8676afa780
|
Fixed mirroring, thanks Tom for noticing!
|
2013-07-29 11:33:18 -07:00 |
|
carlosgs
|
77f831a50f
|
Update README.md
|
2013-07-29 00:04:32 -07:00 |
|
Carlos Garcia Saura
|
52b4e99833
|
Code now supports python3 too
|
2013-07-28 13:57:16 -07:00 |
|
Carlos Garcia Saura
|
8dcdf1f4ae
|
Added support for global configuration
|
2013-07-28 02:21:37 -07:00 |
|
Carlos Garcia Saura
|
9befc0aa66
|
Code cleanup, added Z probing data export and global config file
|
2013-07-28 02:17:22 -07:00 |
|
Carlos Garcia Saura
|
98cb8b5be6
|
Added captures & updated description
|
2013-07-21 12:25:31 -07:00 |
|
Carlos Garcia Saura
|
6b5b55e8d6
|
No changes
|
2013-06-29 16:28:43 -07:00 |
|
carlosgs
|
c2fb816502
|
Added firmware item to to-do list
|
2013-06-18 16:49:43 +02:00 |
|
carlosgs
|
d33c8188c7
|
Added to-do list items
|
2013-06-18 16:47:29 +02:00 |
|
carlosgs
|
9e2ceddd48
|
More tests
|
2013-06-18 16:39:15 +02:00 |
|
carlosgs
|
e2f1b89e15
|
Added RepRap.org wiki link
|
2013-06-16 17:11:17 +02:00 |
|
carlosgs
|
fc6e832156
|
Added LDR board
|
2013-06-15 02:22:29 +02:00 |
|
carlosgs
|
be5edd3bde
|
GNBoard tests
|
2013-06-14 00:50:58 +02:00 |
|
carlosgs
|
19abeb6cc9
|
Added Replath and pyRepRap files
|
2013-06-12 23:30:55 +02:00 |
|
carlosgs
|
603d43a550
|
Formatting
|
2013-06-09 14:17:02 +02:00 |
|
carlosgs
|
86a894e1d1
|
Added mail-list info, general clean-up
|
2013-06-09 14:14:35 +02:00 |
|
carlosgs
|
7fdc5cdc4e
|
Updated description
|
2013-06-09 12:54:38 +02:00 |
|
carlosgs
|
2aeba71c72
|
Bugfix
|
2013-06-07 00:08:00 +02:00 |
|
carlosgs
|
a8aad994d4
|
Added TODO comment
|
2013-06-06 14:14:49 +02:00 |
|
carlosgs
|
029c41db87
|
More software tests, bugfix... etc
|
2013-06-06 13:40:34 +02:00 |
|
carlosgs
|
c65a8de6f0
|
Added note regarding the linear bearings of the X carriage
|
2013-06-04 16:54:06 +02:00 |
|
carlosgs
|
1910b21bad
|
Updated the credits, yOPERO is now author :)
|
2013-06-02 18:34:00 +02:00 |
|
carlosgs
|
4c238d15f4
|
Added picture of the assembled machine (v0.9.7)
|
2013-06-02 18:20:49 +02:00 |
|
carlosgs
|
0c0fd99046
|
Added new XY gear ratio
|
2013-06-02 18:04:34 +02:00 |
|
carlosgs
|
0cabeb3bb9
|
Larger hole for the Z threaded rod in the bottom piece
|
2013-06-02 15:35:50 +02:00 |
|
carlosgs
|
3eb12b17e3
|
v0.9.7 with new Z carriage
|
2013-06-02 15:30:29 +02:00 |
|
carlosgs
|
f72e64d480
|
Updated render image to v0.9.6b (thicker Y axis)
|
2013-06-01 18:14:38 +02:00 |
|
carlosgs
|
0b22ee515a
|
Updated templates to match new Y motor axis. Added the new gears (1.4 ratio, being tested)
|
2013-06-01 17:32:13 +02:00 |
|
carlosgs
|
be89290358
|
Thicker version of the Y axis motor/idle stands
|
2013-06-01 13:26:16 +02:00 |
|
carlosgs
|
9da33e0e09
|
Deleted file from old version
|
2013-06-01 12:50:59 +02:00 |
|
carlosgs
|
ceb222b536
|
Improvements in the GUI, Gcode Parser, Gcode Viewer and Bugfix in Cyclone Host. Now emulator works 100%
|
2013-06-01 12:48:57 +02:00 |
|
carlosgs
|
1b11c8b96b
|
Support for Python 2.6, misc improvements
|
2013-05-31 19:51:06 +02:00 |
|
carlosgs
|
86b996ff33
|
Interpolation results
|
2013-05-31 17:17:03 +02:00 |
|
carlosgs
|
77652958c3
|
More tests, improvements/fixes on the viewer, parser, sender, gerber2gcode... etc
|
2013-05-31 00:41:43 +02:00 |
|
carlosgs
|
960d4ab56e
|
Added emulation for offline tests
|
2013-05-30 13:44:30 +02:00 |
|
carlosgs
|
05f84c2f3b
|
Added long segment splitting for better Z adjustment. Gerber2gcode now allows setting different Z speeds for edges and drills.
|
2013-05-30 01:42:34 +02:00 |
|
carlosgs
|
75cde8c2fc
|
First Z adjust tests. The path of the drill is represented in real time.
|
2013-05-29 23:35:02 +02:00 |
|
carlosgs
|
6375fbcab0
|
Implemented the gcode viewer as a module. Bugfix & code cleanup
|
2013-05-29 18:16:18 +02:00 |
|
carlosgs
|
ce7c72bd00
|
Added 2&3 extra tool passes (for more clearance). Fixed bug when parsing oval shapes from gerber files.
|
2013-05-29 17:32:15 +02:00 |
|
carlosgs
|
a828e2a0d1
|
More improvements regarding Gerber2gcode and the optimizer
|
2013-05-29 12:03:41 +02:00 |
|
carlosgs
|
4dcca04fa4
|
More work regarding: gcode parsing, optimization and visualization
CycloneHost is a python module now
|
2013-05-29 00:49:33 +02:00 |
|
carlosgs
|
57865ddc97
|
Progress on interpolation
|
2013-05-28 13:48:54 +02:00 |
|
carlosgs
|
695934c55e
|
Recompiled frame.stl, it had been overwritten
|
2013-05-28 13:23:24 +02:00 |
|
carlosgs
|
e693093d52
|
Added Yopero's improvement for the Y axis (idle stand)
|
2013-05-28 13:21:43 +02:00 |
|
carlosgs
|
8b0a4634b9
|
First gerber2gcode tests, work in progress!
|
2013-05-28 00:29:00 +02:00 |
|
carlosgs
|
e88354183e
|
Improved frames: thicker stands + easier motor adjustment
|
2013-05-26 14:28:10 +02:00 |