Project Management — AMR ROS2 K4

Project: Blockly ROS2 Robot Controller (Kiwi Wheel AMR) ROS2 Distro: Jazzy Last Updated: 2026-03-18 Current Focus: Task #6 — HMI Interactive Widgets

Dokumentasi lengkap dapat dilihat di DOCUMENTATION.md.

Aturan pengggunaan dokumen

bab pada dokumen merepresentasikan alur rencana pengembangan.

Potential Enhancements

bab ini digunakan untuk Feasibility Study

Planned Feature

Backlog. Setelah kita pelajari untuk di kerjakan maka kita pindah ke backlog

Feature Task

penjabaran Pekerjaan yang ready untuk dikerjakan. Task harus dijelaskan apa yang akan dikerjakan dan terdapat definition of done nya Berikut ini adalah template untuk pembuatan task :

## <nomor task> <judul task> : <state: [ ] >
jelaskan permasalah di bab ini
### Bug 1 [ ] : Keterangan bug untuk rekap permasalahan
**Symtomp**    : jelaskan masalahnya!
**Root Couse** : masalah ini dikarenakan apa?
**Fix**        : bagaimana cara fix nya?
### Definition Of Done
[ ] DoD 1
[ ] DoD 2
[ ] Bug 1 ... 

---

Potential Enhancements

this list is short by priority

• Feasibility Study to implement Controller: mobile robot need controller to move flawlesly.
• Launch files: ROS2 launch files to start all nodes with one command includ node in raspberry pi. composite blockly dan executor yang memiliki composit 2 jenis yaitu menggunakan executor dummy dan executor-hw.
• Simulation: Integrate with Gazebo/Isaac Sim for testing Kiwi Wheel kinematics before deploying to hardware
• Block categories: Future blocks grouped into Robot, Sensors, Navigation categories

Feature Task

3 Enhancement: PCA9685 — 16-Channel PWM Controller (I2C) : [ ]

PCA9685 adalah 16-channel, 12-bit PWM controller via I2C. Motor DC kiwi wheel menggunakan 6 channel (3 motor × 2: PWM + direction), sehingga 10 channel tersedia untuk extensi (servo, LED, dll). Node ini general-purpose — mengontrol channel mana saja via Blockly block dengan parameter address, channel, dan PWM value.

Implementasi

A. Package Structure (C++, ament_cmake)

src/pca9685_node/
├── CMakeLists.txt              # ament_cmake — NO external lib dependency
├── package.xml                 # depend: rclcpp, blockly_interfaces
├── include/pca9685_node/
│   └── pca9685_node.hpp        # Pca9685Node class + I2C helpers
└── src/
    ├── pca9685_node.cpp         # I2C init, write_callback, set_pwm()
    └── main.cpp                 # rclcpp::spin(node)

Hardware interface menggunakan Linux I2C (/dev/i2c-X) via ioctl() — tidak perlu external library, cukup linux/i2c-dev.h (kernel header).

B. ROS2 Interface

New message — blockly_interfaces/msg/PwmWrite.msg:

uint8 address       # I2C address (default 0x40, configurable via solder bridges: 0x40–0x7F)
uint8 channel       # PWM channel (0–15)
uint16 value        # Duty cycle (0–4095, 12-bit resolution)

Topic: /pwm/write (executor → pca9685_node)

ROS2 Parameters (configurable via --ros-args -p):

Parameter	Type	Default	Fungsi
i2c_device	string	/dev/i2c-1	Linux I2C device path
frequency	int	50	PWM frequency Hz (semua channel)

PCA9685 write-only — tidak perlu PwmRead.msg.

C. Node Behavior — Pca9685Node

1. Constructor: open i2c_device, configure prescaler berdasarkan frequency param
2. Subscribe /pwm/write (PwmWrite) — set duty cycle via I2C register write
3. set_pwm(address, channel, value): select I2C slave address via ioctl(I2C_SLAVE), write 4 bytes ke channel registers
4. Multi-address support: satu node bisa mengontrol multiple PCA9685 boards (address dikirim per-message, ioctl(I2C_SLAVE) di-set setiap write)
5. Cleanup: close file descriptor di destructor

PCA9685 register map:

Register	Address	Fungsi
MODE1	0x00	Sleep/restart, auto-increment
LED0_ON_L	0x06	Channel 0 ON timing (4 registers per channel)
PRE_SCALE	0xFE	PWM frequency: prescale = round(25MHz / (4096 × freq)) - 1

D. Handler — blockly_executor/handlers/pwm.py

@handler("pwm_write")
def handle_pwm_write(params, hardware):
    address = int(params["address"], 16)  # hex string → int
    channel = int(params["channel"])
    value = int(params["value"])
    # Dummy: log only. Real: publish PwmWrite to /pwm/write

Lazy-create publisher di hardware.node._pwm_write_pub, sama dengan pola gpio.py.

E. Blockly Block — pwmWrite.js

┌──────────────────────────────────────────────┐
│ PCA9685  addr: [0x40]                        │
│          channel: [0 ▾]    pwm: [■ value]    │
└──────────────────────────────────────────────┘

• addr: FieldDropdown — common addresses (0x40–0x47)
• channel: FieldNumber (0–15)
• pwm: ValueInput (0–4095) — accepts expression blocks, uses String(expr) pattern
• Category: Robot, Command: pwm_write

F. pixi.toml Changes

• setup-dep: tambah i2c-tools (optional, untuk debugging i2cdetect)
• build-pca9685: colcon build --packages-select pca9685_node (depends-on: setup-dep, build-interfaces)
• pca9685-node: ros2 run pca9685_node pca9685_node

Tidak perlu conda deps baru — Linux I2C headers sudah tersedia di kernel.

G. Penggunaan

# Default — /dev/i2c-1, 50 Hz
pixi run pca9685-node

# Ganti I2C device dan frequency via --ros-args
source install/setup.bash
ros2 run pca9685_node pca9685_node --ros-args -p i2c_device:=/dev/i2c-0 -p frequency:=1000

# Cek I2C bus yang tersedia di Pi
ls /dev/i2c-*           # list semua bus
i2cdetect -y 1          # scan device di bus 1 (perlu i2c-tools)

Catatan: pixi run pca9685-node menggunakan parameter default. Untuk override parameter, jalankan ros2 run langsung (setelah source install/setup.bash) karena pixi task tidak meneruskan --ros-args ke proses inner.

Definition Of Done

• src/pca9685_node/ berisi CMakeLists.txt, package.xml, include/, src/
• blockly_interfaces/msg/PwmWrite.msg terdaftar di rosidl_generate_interfaces()
• pixi run build-interfaces berhasil — PwmWrite.msg ter-generate
• pixi run build-pca9685 berhasil di Raspberry Pi (native build) tanpa error
• Node berjalan: pixi run pca9685-node — subscribe /pwm/write
• Parameter i2c_device, frequency berfungsi via --ros-args -p
• Handler pwm_write berfungsi di dummy mode (test passes)
• Blockly block pwmWrite muncul di toolbox, generate valid JS code
• End-to-end: Blockly block → executor (real) → /pwm/write → pca9685_node → I2C write

4 Enhancement: AS5600 — 12-bit Magnetic Rotary Encoder (I2C) : [ ]

AS5600 adalah 12-bit magnetic rotary position sensor via I2C. Kiwi wheel AMR menggunakan 3 encoder (satu per roda) untuk feedback posisi. AS5600 memiliki fixed I2C address (0x36) — untuk 3 module, setiap encoder menggunakan I2C bus terpisah (e.g., /dev/i2c-1, /dev/i2c-3, /dev/i2c-4).

Note: Legacy EncoderRead.msg, encoder.py handler, dan encoderRead.js block telah dihapus dan diganti oleh Task #5 (Unified Odometry Interface). as5600_node sekarang hanya publish nav_msgs/Odometry ke odometry_encoder/odom.

Implementasi

A. Package Structure (C++, ament_cmake)

src/as5600_node/
├── CMakeLists.txt              # ament_cmake — depend: rclcpp, nav_msgs, geometry_msgs
├── package.xml
├── include/as5600_node/
│   └── as5600_node.hpp         # As5600Node class + kinematics + I2C helpers
└── src/
    ├── as5600_node.cpp          # I2C read + kiwi wheel kinematics + nav_msgs publish
    └── main.cpp                 # rclcpp::spin(node)

Hardware interface menggunakan Linux I2C (/dev/i2c-X) via ioctl() — tidak perlu external library, cukup linux/i2c-dev.h (kernel header).

B. ROS2 Interface

Menggunakan nav_msgs/Odometry (standar ROS2) — lihat Task #5 untuk detail fields dan kinematics.

Topic: odometry_encoder/odom (as5600_node → executor)

ROS2 Parameters (configurable via --ros-args -p):

Parameter	Type	Default	Fungsi
i2c_devices	string[]	["/dev/i2c-1"]	List of I2C device paths, satu per encoder
publish_rate	double	10.0	Publish frequency Hz
wheel_radius	double	5.0	Radius roda (cm) — HARUS di-tune
wheel_distance	double	15.0	Jarak center-to-wheel (cm) — HARUS di-tune
wheel_angles	double[]	[0, 2π/3, 4π/3]	Sudut posisi roda (rad)

C. pixi.toml

• build-as5600: colcon build --packages-select as5600_node (depends-on: setup-dep, build-interfaces)
• as5600-node: ros2 run as5600_node as5600_node

D. Penggunaan

# Default — /dev/i2c-1, 10 Hz, 1 encoder
pixi run as5600-node

# 3 encoder pada bus terpisah, 20 Hz, custom wheel geometry
source install/setup.bash
ros2 run as5600_node as5600_node --ros-args \
  -p i2c_devices:="['/dev/i2c-1', '/dev/i2c-3', '/dev/i2c-4']" \
  -p publish_rate:=20.0 \
  -p wheel_radius:=5.0 \
  -p wheel_distance:=15.0

Definition Of Done

• src/as5600_node/ berisi CMakeLists.txt, package.xml, include/, src/
• pixi run build-as5600 berhasil di Raspberry Pi (native build) tanpa error
• Node berjalan: pixi run as5600-node — publish odometry_encoder/odom
• Parameter i2c_devices, publish_rate, wheel_radius, wheel_distance berfungsi via --ros-args -p
• End-to-end: as5600_node → odometry_encoder/odom → executor cache → Blockly

5 Enhancement: Unified Odometry Interface — nav_msgs/Odometry : [ ]

Interface odometry menggunakan standar ROS2 nav_msgs/Odometry agar kompatibel dengan ekosistem ROS2. Setiap jenis sensor odometry (encoder, IMU, optical) publish ke topic terpisah odometry_<type>/odom menggunakan message type yang sama.

Motivasi: Modularitas — tambah sensor baru cukup buat node yang publish nav_msgs/Odometry ke odometry_<type>/odom. Dari Blockly, user pilih source via dropdown.

Arsitektur:

as5600_node (encoder)     → odometry_encoder/odom  (nav_msgs/Odometry)
future: imu_node          → odometry_imu/odom      (nav_msgs/Odometry)
future: optical_node      → odometry_optical/odom   (nav_msgs/Odometry)

Satuan: Mengikuti REP-103 kecuali jarak menggunakan centimeter (cm) karena rentang pergerakan robot kecil. Angular menggunakan radian.

Blocker: Implementasi sensor baru (IMU, optical) menunggu desain mekanik final.

Implementasi

A. Standard Interface — nav_msgs/Odometry

Tidak menggunakan custom message. nav_msgs/Odometry sudah tersedia di RoboStack. Message fields yang digunakan:

• pose.pose.position.x/y — posisi robot (cm)
• pose.pose.orientation — quaternion dari heading (2D: z=sin(θ/2), w=cos(θ/2))
• twist.twist.linear.x/y — kecepatan robot (cm/s)
• twist.twist.angular.z — kecepatan angular (rad/s)
• header.frame_id = "odom", child_frame_id = "base_link"

B. AS5600 Node — Kiwi Wheel Kinematics

as5600_node menghitung robot-level odometry langsung dari 3 encoder menggunakan kiwi wheel forward kinematics, publish ke odometry_encoder/odom (nav_msgs/Odometry).

Legacy EncoderRead.msg dan /encoder/state topic telah dihapus — clean break, hanya nav_msgs/Odometry.

Kiwi Wheel Forward Kinematics (3 roda @ 120°):

Constraint: ωᵢ = (1/r)(-vx·sin(αᵢ) + vy·cos(αᵢ) + L·ωz)

Forward kinematics (3 roda → robot velocity):
vx  = (r/n) · Σ(-ωᵢ·sin(αᵢ))     [cm/s]
vy  = (r/n) · Σ( ωᵢ·cos(αᵢ))     [cm/s]
ωz  = r/(n·L) · Σ(ωᵢ)            [rad/s]

Pose integration (Euler):
x  += (vx·cos(θ) - vy·sin(θ))·dt   [cm]
y  += (vx·sin(θ) + vy·cos(θ))·dt   [cm]
θ  += ωz·dt                         [rad]

C. Handler — odometry.py (returns JSON)

@handler("odometry_read")
def handle_odometry_read(params, hardware):
    source = params.get("source", "encoder")
    # Returns ALL fields as JSON: {"x":0.0, "y":0.0, "heading":0.0, "vx":0.0, "vy":0.0, "omega_z":0.0}

Lazy-create subscriber per source ke odometry_<source>/odom. Satu action call return semua data sekaligus — efisien, tidak perlu action call per-field.

D. Blockly Blocks — Fetch Once, Extract Many

Dua block terpisah untuk efisiensi (1 action call untuk semua field):

Block 1: getOdometry (odometryRead.js) — Value block, fetch all data:

┌─────────────────────────────────┐
│ getOdometry [Encoder ▾]         │ → output: Object
└─────────────────────────────────┘

Digunakan dengan Blockly built-in "set variable to" block:

set [odom ▾] to [getOdometry [Encoder ▾]]    ← 1 action call

Block 2: getValueOdometry (odometryGet.js) — Value block, extract field (no action call):

┌───────────────────────────────────────────────┐
│ getValueOdometry [X (cm) ▾] from [odom ▾]     │ → output: Number
└───────────────────────────────────────────────┘

Fields: X (cm), Y (cm), Heading (rad), Vel X (cm/s), Vel Y (cm/s), Angular Vel (rad/s)

E. Future Phases (blocked on mekanik)

• Sensor nodes baru (imu_node, optical_node) publish nav_msgs/Odometry ke odometry_<type>/odom
• Update odometryRead.js dropdown source untuk sensor baru
• Handler odometry.py auto-subscribe ke topic baru via _SOURCE_TOPICS dict

Definition Of Done

• Interface menggunakan nav_msgs/Odometry (bukan custom message)
• as5600_node publish ke odometry_encoder/odom dengan kiwi wheel kinematics
• Legacy EncoderRead.msg, encoder.py, encoderRead.js dihapus — clean break
• Handler odometry_read return JSON semua fields (bukan per-field)
• Blockly: getOdometry (fetch) + getValueOdometry (extract) — 1 action call
• pixi run build-as5600 berhasil — as5600_node compile dengan nav_msgs dependency
• Handler odometry_read berfungsi di dummy mode (test passes)
• End-to-end: Blockly → executor (real) → cache odometry_encoder/odom → return JSON
• Integration test test_block_odometry.py passes di dummy mode

6 Enhancement: HMI Interactive Widgets — Button, Slider, Switch : [x]

Menambahkan widget control (dua arah: user input ↔ code): Button, Slider, dan Switch — mengikuti konsep LabVIEW "Controls vs Indicators". Setiap control memiliki SET block (statement) dan GET block (value). Semua client-side JS, tidak ada perubahan Python/ROS2.

Detail implementasi: docs/architecture.md §2.4, BLOCKS.md §7.16, troubleshooting.md.

Definition Of Done

• 6 block file (SET + GET untuk button, slider, switch)
• hmi-manager.js — render, setter, getter, user interaction tracking, layout serialization
• hmi-preview.js — design-time preview + auto-increment widget names
• manifest.js — 6 entry baru
• CSS untuk button, slider, switch di index.html
• Bug fix: highlightBlock periodic macrotask yield (debug-engine.js)
• Bug fix: pointerdown instead of click for button/switch (hmi-manager.js)
• Bug fix: _userState / _userHasInteracted tracking for switch/slider (hmi-manager.js)
• Bug fix: auto-increment duplicate widget names (hmi-preview.js)