23 KiB

Raw Blame History

Raspberry Pi 3 Emulation (BCM2837 / ARM Cortex-A53)

Status: Functional · Backend QEMU process · WebSocket communication Engine: QEMU 8.1.3 (qemu-system-aarch64 -M raspi3b) Platform: BCM2837 ARM Cortex-A53 @ 1.2 GHz — 64-bit ARMv8, quad-core Runs: Python scripts (Raspberry Pi OS Trixie) — no Arduino compilation needed Available on: all platforms (Windows, macOS, Linux, Docker)

Overview
Supported Boards
Emulator Architecture
System Components
Boot Sequence — Step by Step
GPIO Shim — How Python Controls GPIO
WebSocket Protocol
Serial Communication (UART)
Pin Mapping — Physical to BCM GPIO
Virtual File System (VFS)
Multi-Board Integration — Pi + Arduino
Boot Images
QEMU Launch Command
Known Limitations
Differences vs Other Emulators
Key Files

1. Overview

The Raspberry Pi 3B is a full Linux single-board computer based on the Broadcom BCM2837 SoC (4× ARM Cortex-A53, ARMv8 64-bit). Unlike the other boards in Velxio — which compile and run Arduino C++ code — the Raspberry Pi 3 emulation boots a real Raspberry Pi OS (Trixie) inside QEMU and lets you run Python scripts that interact with GPIO.

There is no compilation step for the Raspberry Pi: you write a Python script in the editor, the backend uploads it to the emulated filesystem, and the Pi OS executes it directly.

Emulation Engine Comparison

Board	Engine	Location	Language
Arduino Uno / Nano / Mega	avr8js	Browser	C++ (Arduino)
Raspberry Pi Pico	rp2040js	Browser	C++ (Arduino)
ESP32-C3 / XIAO-C3	RiscVCore.ts	Browser	C++ (Arduino)
ESP32 / ESP32-S3	QEMU lcgamboa (Xtensa)	Backend WebSocket	C++ (Arduino)
Raspberry Pi 3B	QEMU 8.1.3 (raspi3b)	Backend WebSocket	Python

Key Differences from Arduino-based Boards

No FQBN — no arduino-cli compilation; the board kind has FQBN = null
Boots a real OS — Raspberry Pi OS Trixie runs inside QEMU (~2–5 seconds boot time)
Python runtime — scripts use RPi.GPIO (or a compatible shim) to interact with GPIO
Persistent storage — the OS image is a real disk image; a qcow2 overlay is used per session so the base image is never modified
Multi-board serial — the Pi can communicate with co-simulated Arduino boards via virtual serial lines

2. Supported Boards

Raspberry Pi 3B

Board	QEMU Machine	CPU	Notes
Raspberry Pi 3B	`raspi3b`	BCM2837, 4× Cortex-A53	Full Raspberry Pi OS support

Raspberry Pi 3B+ and Pi 4 are not currently supported. The raspi3b machine type in QEMU closely matches the standard 3B hardware.

3. Emulator Architecture

Python Script (user writes in editor)
        │
        ▼  (uploaded via WebSocket / VFS)
  /home/pi/script.py  (inside Raspberry Pi OS)
        │
        ▼  python3 /home/pi/script.py
  RPi.GPIO (shim)  ←  intercepted by gpio_shim.py
        │
        ├── GPIO.output(17, HIGH)  →  "GPIO 17 1\n"  →  ttyAMA1  →  Backend
        │                                                             │
        │                                                             ▼
        │                                                      gpio_change event
        │                                                      WebSocket → Frontend
        │                                                      PinManager → LED visual
        │
        └── Serial.print()  →  ttyAMA0  →  Backend  →  serial_output  →  Serial Monitor

Communication Channels

The Raspberry Pi uses two independent TCP serial ports exposed through QEMU:

Channel	QEMU Serial	TCP Port	Purpose
User Serial	`-serial tcp:...:N`	dynamic	User `print()` output and `input()` — visible in Serial Monitor
GPIO Protocol	`-serial tcp:...:M`	dynamic	GPIO shim protocol (`GPIO <pin> <val>\n`)

Both ports are allocated dynamically at startup to avoid conflicts on the host machine.

4. System Components

Backend

Component	File	Responsibility
`QemuManager`	`backend/app/services/qemu_manager.py`	Singleton that manages all Pi instances (one per WebSocket client)
`PiInstance`	`backend/app/services/qemu_manager.py`	Runtime state for one running Pi: QEMU process, TCP ports, overlay path
`gpio_shim`	`backend/app/services/gpio_shim.py`	`RPi.GPIO` drop-in replacement; speaks the GPIO text protocol over ttyAMA1
WebSocket route	`backend/app/api/routes/simulation.py`	`GET /api/simulation/ws/{client_id}` — bidirectional JSON message bus

Frontend

Component	File	Responsibility
`RaspberryPi3Bridge`	`frontend/src/simulation/RaspberryPi3Bridge.ts`	WebSocket connection manager; sends/receives JSON messages
`useSimulatorStore`	`frontend/src/store/useSimulatorStore.ts`	Zustand store; wires bridge events to board state and pin manager
`useVfsStore`	`frontend/src/store/useVfsStore.ts`	Virtual filesystem tree per board; Python script editing
`RaspberryPi3.tsx`	`frontend/src/components/components-wokwi/RaspberryPi3.tsx`	React board component (SVG image, 40-pin header)
`boardPinMapping.ts`	`frontend/src/utils/boardPinMapping.ts`	Physical pin → BCM GPIO number translation

5. Boot Sequence — Step by Step

1. User clicks "Start" (or "Run")
        │
        ▼
2. SimulatorCanvas detects board kind 'raspberry-pi-3'
   → calls startBoard(boardId)

3. useSimulatorStore calls RaspberryPi3Bridge.connect()

4. Bridge opens WebSocket:
   ws://localhost:8001/api/simulation/ws/<boardId>
   → sends { type: 'start_pi', data: { board: 'raspberry-pi-3' } }

5. Backend (simulation.py) routes to:
   QemuManager.start_instance(client_id, 'raspberry-pi-3', callback)

6. QemuManager._boot(inst):
   a. Allocate two free TCP ports (serial_port, gpio_port)
   b. Create qcow2 overlay over base SD image:
      qemu-img create -f qcow2 -b raspios.img overlay_<id>.qcow2
   c. Launch qemu-system-aarch64 (see Section 13 for full command)
   d. Emit { type: 'system', event: 'booting' }

7. Wait ~2 seconds for QEMU to initialize TCP servers

8. QemuManager._connect_serial(inst):
   → Connect to ttyAMA0 TCP socket
   → Start async reader loop (forwards bytes as serial_output events)
   → Emit { type: 'system', event: 'booted' }

9. QemuManager._connect_gpio(inst):
   → Connect to ttyAMA1 TCP socket
   → Start async reader loop (parses "GPIO <pin> <val>\n" lines)

10. Frontend receives 'booted' event
    → Board UI updates to "running" state
    → Serial Monitor shows first Linux kernel output

11. Python script runs:
    → python3 /home/pi/script.py (auto-launched via -append init=/bin/sh)

6. GPIO Shim — How Python Controls GPIO

The gpio_shim.py module is injected into the Raspberry Pi OS at the standard RPi.GPIO installation path:

/usr/local/lib/python3.11/dist-packages/RPi/GPIO.py

When a Python script does import RPi.GPIO as GPIO, it gets this shim instead of the real hardware driver. The shim communicates over /dev/ttyAMA1 (the second QEMU serial port) using a simple text protocol.

GPIO Text Protocol

Pi → Backend  (output state change):
    "GPIO <bcm_pin> <0|1>\n"
    Example: "GPIO 17 1\n"  ← GPIO 17 driven HIGH

Backend → Pi  (external input, e.g. button press from canvas):
    "SET <bcm_pin> <0|1>\n"
    Example: "SET 22 1\n"  ← button wired to GPIO 22 pressed

Supported RPi.GPIO API

import RPi.GPIO as GPIO

# Numbering mode
GPIO.setmode(GPIO.BCM)    # use BCM numbers (GPIO17, GPIO22, ...)
GPIO.setmode(GPIO.BOARD)  # use physical pin numbers (11, 15, ...)

# Pin direction
GPIO.setup(17, GPIO.OUT)
GPIO.setup(22, GPIO.IN, pull_up_down=GPIO.PUD_UP)

# Digital output
GPIO.output(17, GPIO.HIGH)   # → sends "GPIO 17 1\n" to backend
GPIO.output(17, GPIO.LOW)    # → sends "GPIO 17 0\n" to backend
GPIO.output(17, True)        # equivalent to GPIO.HIGH

# Digital input
state = GPIO.input(22)       # reads last known state (updated by "SET" messages)

# Event detection
GPIO.add_event_detect(22, GPIO.RISING, callback=my_callback)
GPIO.add_event_detect(22, GPIO.FALLING, callback=my_callback)
GPIO.add_event_detect(22, GPIO.BOTH, callback=my_callback)

# PWM (simplified — simulated as digital output)
pwm = GPIO.PWM(18, 1000)   # pin 18, 1000 Hz
pwm.start(75)              # 75% duty cycle → HIGH (duty > 50% → HIGH, else LOW)
pwm.ChangeDutyCycle(25)    # 25% duty cycle → LOW
pwm.stop()

# Cleanup
GPIO.cleanup()
GPIO.cleanup(17)           # clean specific pin

PWM limitation: The shim does not implement real PWM waveforms. It converts duty cycle to a binary state: duty > 50 → HIGH, duty ≤ 50 → LOW. Visual LED dimming is not supported for Pi GPIO PWM.

Example Python Script (Blink LED)

#!/usr/bin/env python3
import time
import RPi.GPIO as GPIO

GPIO.setmode(GPIO.BCM)
GPIO.setup(17, GPIO.OUT)

try:
    while True:
        GPIO.output(17, GPIO.HIGH)
        print("LED ON")
        time.sleep(1)
        GPIO.output(17, GPIO.LOW)
        print("LED OFF")
        time.sleep(1)
finally:
    GPIO.cleanup()

7. WebSocket Protocol

All communication between the frontend and backend passes through a single WebSocket connection per board instance.

Endpoint: GET /api/simulation/ws/{client_id}

Frontend → Backend Messages

Message Type	Payload	Description
`start_pi`	`{ board: "raspberry-pi-3" }`	Launch QEMU, start the Pi
`stop_pi`	(empty)	Stop QEMU, clean up overlay
`serial_input`	`{ bytes: number[] }`	Send bytes to ttyAMA0 (Serial Monitor → Pi)
`gpio_in`	`{ pin: number, state: 0\|1 }`	Inject external GPIO state (button press from canvas)

Backend → Frontend Messages

Message Type	Payload	Description
`serial_output`	`{ data: string }`	String data from ttyAMA0 (Pi print output)
`gpio_change`	`{ pin: number, state: 0\|1 }`	A GPIO pin changed state (driven by Python script)
`system`	`{ event: "booting"\|"booted"\|"exited" }`	Boot lifecycle events
`error`	`{ message: string }`	Error from QEMU or backend

8. Serial Communication (UART)

The Raspberry Pi 3 exposes two UART ports through QEMU:

Port	Device	Physical Pins	Role
UART0 (ttyAMA0)	`/dev/ttyAMA0`	GPIO14 (TX), GPIO15 (RX)	User serial — `print()` output, `input()`, `serial.Serial()`
UART1 (ttyAMA1)	`/dev/ttyAMA1`	— (internal)	GPIO shim protocol — reserved, not accessible to user scripts

Serial Monitor Integration

Anything the Python script writes to stdout or to /dev/ttyAMA0 appears in the Serial Monitor panel:

# stdout (print) — captured automatically
print("Hello from Pi!")

# Direct ttyAMA0 (explicit serial)
import serial
port = serial.Serial('/dev/ttyAMA0', baudrate=9600, timeout=1)
port.write(b"Hello Arduino!\n")

Sending Text to the Pi

Text typed in the Serial Monitor input box is sent to ttyAMA0 as a serial_input message, which the Pi receives via input() or by reading /dev/ttyAMA0.

9. Pin Mapping — Physical to BCM GPIO

The Raspberry Pi 3B has a standard 40-pin GPIO header (2 rows × 20 columns). The table below shows the mapping from physical pin number to BCM GPIO number:

Physical	BCM	Function	Physical	BCM	Function
1	—	3.3 V	2	—	5 V
3	2	I2C1 SDA	4	—	5 V
5	3	I2C1 SCL	6	—	GND
7	4	GPIO	8	14	UART TX
9	—	GND	10	15	UART RX
11	17	GPIO	12	18	PWM0
13	27	GPIO	14	—	GND
15	22	GPIO	16	23	GPIO
17	—	3.3 V	18	24	GPIO
19	10	SPI MOSI	20	—	GND
21	9	SPI MISO	22	25	GPIO
23	11	SPI SCLK	24	8	SPI CE0
25	—	GND	26	7	SPI CE1
27	—	ID_SD	28	—	ID_SC
29	5	GPIO	30	—	GND
31	6	GPIO	32	12	PWM0
33	13	PWM1	34	—	GND
35	19	SPI1 MISO	36	16	SPI1 CE2
37	26	GPIO	38	20	SPI1 MOSI
39	—	GND	40	21	SPI1 SCLK

Pins 27 and 28 are reserved for ID EEPROM. Power and GND pins have BCM = —.

Pin Resolution in Frontend

// Wire connects physical pin "8" on the Pi board
boardPinToNumber('raspberry-pi-3', '8')      // → 14 (BCM GPIO14, UART TX)
boardPinToNumber('raspberry-pi-3', 'GPIO17') // → 17
boardPinToNumber('raspberry-pi-3', 'GND')    // → null (not a GPIO)

10. Virtual File System (VFS)

Each Raspberry Pi 3 board instance has its own virtual filesystem tree stored in the useVfsStore Zustand store. This lets you create and edit Python scripts directly in the Velxio editor before they are uploaded to the Pi.

Default VFS Tree

/
└── home/
    └── pi/
        ├── script.py     ← main Python script (editable)
        └── hello.sh      ← example shell script

Default `script.py`

#!/usr/bin/env python3
import time
import RPi.GPIO as GPIO

GPIO.setmode(GPIO.BCM)
GPIO.setup(17, GPIO.OUT)

while True:
    GPIO.output(17, GPIO.HIGH)
    print("LED on")
    time.sleep(1)
    GPIO.output(17, GPIO.LOW)
    print("LED off")
    time.sleep(1)

VFS API

const vfs = useVfsStore.getState();

vfs.initBoardVfs(boardId)                          // create default tree
vfs.createNode(boardId, parentId, 'app.py', 'file') // add new file
vfs.setContent(boardId, nodeId, pythonCode)         // update file content
vfs.serializeForUpload(boardId)                     // returns [{ path, content }, ...]

Files in the VFS are uploaded to the Pi OS at boot via the WebSocket connection before the script is executed.

11. Multi-Board Integration — Pi + Arduino

The Raspberry Pi 3 can be placed on the same canvas as Arduino or other boards. When wires connect a Pi GPIO pin to an Arduino pin, the stores route data between them automatically.

Pi → Arduino (Serial TX)

Pi Python script:
    port.write(b"LED_ON\n")
        │
        ▼  ttyAMA0 byte output
  serial_output WebSocket message
        │
        ▼  useSimulatorStore (serial callback)
  AVRSimulator.serialWrite("L")  ←  feeds byte into Arduino RX FIFO
        │
        ▼  Arduino sketch:
  String cmd = Serial.readStringUntil('\n');
  if (cmd == "LED_ON") digitalWrite(8, HIGH);

Arduino → Pi (Serial RX)

Arduino sketch:
    Serial.println("SENSOR:1023");
        │
        ▼  USART byte emitted
  useSimulatorStore serial callback
        │
        ▼  bridge.sendSerialBytes([charCode, ...])
  serial_input WebSocket message → Backend
        │
        ▼  qemu_manager.send_serial_bytes(client_id, bytes)
  ttyAMA0 receives bytes → Pi reads with:
  line = port.readline()  # "SENSOR:1023\n"

Example Project: Pi + Arduino LED Control

This example (included in the gallery as pi-to-arduino-led-control) demonstrates bidirectional serial communication:

Pi Script:

import serial, time

port = serial.Serial('/dev/ttyAMA0', baudrate=9600, timeout=1)

for _ in range(3):
    port.write(b"LED1_ON\n")
    time.sleep(0.5)
    port.write(b"LED1_OFF\n")
    time.sleep(0.5)

port.write(b"LED2_ON\n")
time.sleep(2)
port.write(b"LED2_OFF\n")

Arduino Sketch:

const int LED1 = 8, LED2 = 9;

void setup() {
  Serial.begin(9600);
  pinMode(LED1, OUTPUT);
  pinMode(LED2, OUTPUT);
}

void loop() {
  if (Serial.available()) {
    String cmd = Serial.readStringUntil('\n');
    if      (cmd == "LED1_ON")  digitalWrite(LED1, HIGH);
    else if (cmd == "LED1_OFF") digitalWrite(LED1, LOW);
    else if (cmd == "LED2_ON")  digitalWrite(LED2, HIGH);
    else if (cmd == "LED2_OFF") digitalWrite(LED2, LOW);
  }
}

12. Boot Images

QEMU needs three files from the /img/ directory to boot the Raspberry Pi 3:

File	Size	Description
`kernel8.img`	~6 MB	ARM64 Linux kernel extracted from Raspberry Pi OS Trixie
`bcm271~1.dtb`	~40 KB	Device tree binary — defines CPU, RAM, peripheral base addresses
`2025-12-04-raspios-trixie-armhf.img`	~5.67 GB	Full Raspberry Pi OS SD card image (root filesystem)

The base SD image is never modified. Each session creates a qcow2 copy-on-write overlay (overlay_<session_id>.qcow2) that records only the changes made during that session. The overlay is automatically deleted when the session ends.

Creating the Overlay at Runtime

# Backend does this automatically for each session:
qemu-img create -f qcow2 \
  -b /img/2025-12-04-raspios-trixie-armhf.img \
  /tmp/overlay_<session_id>.qcow2

13. QEMU Launch Command

qemu-system-aarch64 \
  -M raspi3b \
  -kernel /img/kernel8.img \
  -dtb    /img/bcm271~1.dtb \
  -drive  file=/tmp/overlay_<id>.qcow2,if=sd,format=qcow2 \
  -m 1G \
  -smp 4 \
  -nographic \
  -serial tcp:127.0.0.1:<serial_port>,server,nowait \
  -serial tcp:127.0.0.1:<gpio_port>,server,nowait \
  -append 'console=ttyAMA0 root=/dev/mmcblk0p2 rootwait rw \
           dwc_otg.lpm_enable=0 quiet init=/bin/sh'

Key Flags

Flag	Value	Meaning
`-M raspi3b`	machine type	Emulate the Raspberry Pi 3B hardware
`-m 1G`	RAM	1 GB RAM (matches real Pi 3B)
`-smp 4`	CPU cores	4 ARM Cortex-A53 cores
`-nographic`	no display	No HDMI/video output — serial only
`-serial tcp:...:N,server,nowait`	first serial	ttyAMA0 (user serial) served on TCP port N
`-serial tcp:...:M,server,nowait`	second serial	ttyAMA1 (GPIO shim protocol) served on TCP port M
`-append ... init=/bin/sh`	kernel cmdline	Boot straight to a shell (skips systemd login)
`-drive ...,format=qcow2`	disk	qcow2 overlay over the base SD image

14. Known Limitations

Limitation	Detail
Boot time	QEMU takes 2–5 seconds to start; the frontend shows a "booting" state during this time
No real PWM	`GPIO.PWM` simulates duty cycle as binary state (>50% = HIGH, ≤50% = LOW); no analog dimming
No I2C emulation	`smbus`, `smbus2`, `i2c_msg` — I2C bus transactions are not forwarded to virtual devices
No SPI emulation	Hardware SPI registers not forwarded; `spidev` library will fail
Single UART for GPIO	ttyAMA1 is reserved for the GPIO shim; scripts cannot use it for other serial devices
No GUI / display	HDMI output is disabled (`-nographic`); GUI Python libraries (Tkinter, pygame, etc.) will not work
No networking	QEMU does not expose a network interface; `requests`, `socket`, `urllib` will fail
No persistent state	The qcow2 overlay is deleted after shutdown; files written to the Pi OS do not survive a restart
Reset is reconnect	`resetBoard()` is not implemented; to restart the Pi, stop it and start it again
Session isolation	Each board instance creates an independent QEMU process; two Pi boards do not share any state
Resource usage	Each Pi instance launches a full QEMU process (~200 MB RAM); hosting many simultaneous sessions is resource-intensive

15. Differences vs Other Emulators

Aspect	Raspberry Pi 3B	Raspberry Pi Pico	ESP32 (Xtensa)	Arduino AVR
Engine	QEMU raspi3b	rp2040js (browser)	QEMU lcgamboa (backend)	avr8js (browser)
Backend required	Yes (QEMU process)	No	Yes (QEMU process)	No
Language	Python	C++ (Arduino)	C++ (Arduino)	C++ (Arduino)
Compilation step	No	Yes (arduino-cli)	Yes (arduino-cli)	Yes (arduino-cli)
OS	Raspberry Pi OS (Linux)	None (bare metal)	None (ESP-IDF)	None (bare metal)
Boot time	~2–5 s	Instant	~1–2 s	Instant
GPIO protocol	Text over ttyAMA1	MMIO direct	QEMU callbacks + WebSocket	Port listeners
Serial	ttyAMA0 (real UART)	UART0/1 (rp2040js)	UART0 (QEMU)	USART0 (avr8js)
I2C	Not forwarded to frontend	2 buses + virtual devices	Emulated	Not emulated
PWM	Binary (no waveform)	Hardware PWM	LEDC (mapped)	Timer-based
Multi-board comms	Yes (serial bridge)	No	No	No
Oscilloscope	No	Yes (8 ns resolution)	No	Yes
CI tests	No	Yes (Vitest)	No	Yes (Vitest)
Disk image required	Yes (~5.67 GB)	No	No	No

16. Key Files

File	Description
`backend/app/services/qemu_manager.py`	`QemuManager` — manages QEMU process lifecycle, TCP sockets, qcow2 overlays
`backend/app/services/gpio_shim.py`	`RPi.GPIO` drop-in replacement; speaks text protocol over ttyAMA1
`backend/app/api/routes/simulation.py`	WebSocket endpoint `/api/simulation/ws/{client_id}`
`frontend/src/simulation/RaspberryPi3Bridge.ts`	WebSocket client; routes `serial_output`, `gpio_change`, `system` events
`frontend/src/store/useSimulatorStore.ts`	Board lifecycle, serial bridge to co-simulated AVR/Pico boards
`frontend/src/store/useVfsStore.ts`	Per-board virtual filesystem (Python script editor)
`frontend/src/utils/boardPinMapping.ts`	Physical pin → BCM GPIO number mapping table
`frontend/src/components/components-wokwi/RaspberryPi3.tsx`	Board React component (SVG, 40-pin header coordinates)
`frontend/src/components/components-wokwi/RaspberryPi3Element.ts`	Web Component for canvas rendering and wire endpoints
`frontend/src/types/board.ts`	`BoardKind` type, `FQBN = null` for Raspberry Pi 3
`img/kernel8.img`	ARM64 kernel extracted from Raspberry Pi OS Trixie
`img/bcm271~1.dtb`	Device tree binary for BCM2837
`img/2025-12-04-raspios-trixie-armhf.img`	Raspberry Pi OS SD image (~5.67 GB) — base for qcow2 overlays

23 KiB Raw Blame History Unescape Escape