History

Carlos Garcia 9ed75a0d3b Improved linear bearing holder. Work on the XZ axis		2014-07-25 19:08:12 +02:00
..
dxf	Increased OpenScad default fragment resolution	2014-07-10 11:35:25 +02:00
gears	Increased Y axis length	2014-07-21 17:29:20 +02:00
libs	Improved linear bearing holder. Work on the XZ axis	2014-07-25 19:08:12 +02:00
output	Improved linear bearing holder. Work on the XZ axis	2014-07-25 19:08:12 +02:00
Cyclone.scad	Improved linear bearing holder. Work on the XZ axis	2014-07-25 19:08:12 +02:00
Cyclone_X_carriage.scad	…
Cyclone_X_frames.scad	Added Y nut holder	2014-07-22 16:48:58 +02:00
Cyclone_Y_carriage.scad	Improved linear bearing holder. Work on the XZ axis	2014-07-25 19:08:12 +02:00
Cyclone_Y_frames.scad	Added Y frontal frame (motor support)	2014-07-18 18:43:04 +02:00
Cyclone_Z_carriage.scad	…
README.md	Linked GIF animation	2014-07-22 13:04:12 +02:00

README.md

Hardware for Cyclone-PCB-Factory

Version 2.0

Adressing all the issues from the original design, implementing improvements by yOPERO, Martin Zabojnik and others.

Tougher parts (great ongoing work!):
Stronger holders for the linear bearings (vibration makes them slide away)
Reinforce screw holders
Attachment for a vacuum cleaner
Better scalability (particularly for the Y axis)
Better spindle motor design:
Brushless motor for the spindle
Spindle speed control
Integrated endstop holders

Work in progress

The new design tries to be more parameterized:

Disclaimer

This hardware/software is provided "as is", and you use the hardware/software at your own risk. Under nocircumstances shall any author be liable for direct, indirect, special, incidental, or consequential damages resulting from the use, misuse, or inability to use this hardware/software, even if the authors have been advised of the possibility of such damages.