38 lines
1.4 KiB
Markdown
38 lines
1.4 KiB
Markdown
Hardware for Cyclone-PCB-Factory
|
|
===================
|
|
|
|
Version 2.0
|
|
--
|
|
Adressing all the issues from the original design, implementing improvements by yOPERO, Martin Zabojnik and others.
|
|
|
|
* More robust design with tougher parts:
|
|
* Better holders for the linear bearings (vibration makes them slide away)
|
|
* Reinforced nut/screw holders
|
|
* Attachment for a vacuum cleaner
|
|
* Better scalability (parameterized design)
|
|
* Using a [Dremel 200](http://www.dremel.com/en-us/tools/Pages/ToolDetail.aspx?pid=200+Series) as the spindle motor
|
|
* Integrated endstop holders
|
|
|
|
Work in progress. Pending tasks:
|
|
--
|
|
|
|
* Endstop integration for X, Y and Z
|
|
* PCB holder
|
|
* Fork Marlin firmware and add Cyclone parameters
|
|
* Better plastic-saving holes for the X frames
|
|
* Improve the nut holder in the X carriage
|
|
* Re-design the [Z carriage](INHERITED) after testing performance. Integrate vacuum cleaner attachment
|
|
* Re-design the [gears](INHERITED) with smoother edges
|
|
|
|
|
|
|
|
|
|
The new design tries to be more parameterized:
|
|
|
|
|
|
|
|
Disclaimer
|
|
--
|
|
This hardware/software is provided "as is", and you use the hardware/software at your own risk. Under nocircumstances shall any author be liable for direct, indirect, special, incidental, or consequential damages resulting from the use, misuse, or inability to use this hardware/software, even if the authors have been advised of the possibility of such damages.
|
|
|