Glen Chung
|
403360142b
|
2.9 x 13 mm was a little too short, use 2.9 x 16 mm instead
|
2013-10-16 23:43:18 +08:00 |
|
Glen Chung
|
fe85003b84
|
two of 2.9 x 13 mm self tapping scres for each smooth rod fix
|
2013-10-16 23:20:10 +08:00 |
|
Glen Chung
|
15aadc258e
|
six of 2.9 x 16mm self tapping screws for both frames
|
2013-10-16 22:43:58 +08:00 |
|
Glen Chung
|
9120a0de40
|
four of M3 x 8mm to mount X motor
|
2013-10-16 22:32:25 +08:00 |
|
Glen Chung
|
79229527de
|
fix motor gear
|
2013-10-16 22:31:58 +08:00 |
|
Glen Chung
|
d486d3a790
|
X motor dimension from my BOM
|
2013-10-16 22:31:08 +08:00 |
|
Glen Chung
|
00d772eac6
|
Y micro switch assembly was wrong
|
2013-10-16 22:18:42 +08:00 |
|
Glen Chung
|
a310df8533
|
add M3 x 8mm grub screw to attach Gear to motor shaft
|
2013-10-16 08:33:30 +08:00 |
|
Glen Chung
|
e4f6ee34b7
|
1. move M3 x 8mm grub screw to motor_gear.scad
2. more comments
3. BlackPaint micro switch
|
2013-10-16 08:25:38 +08:00 |
|
Glen Chung
|
bd1ff22a7f
|
screws for micro switch assembly
|
2013-10-16 00:05:26 +08:00 |
|
Glen Chung
|
03774e6530
|
more parts for assembly instruction
|
2013-10-15 23:39:03 +08:00 |
|
Glen Chung
|
3a69141e0a
|
Y micro switch
|
2013-10-15 00:03:43 +08:00 |
|
Glen Chung
|
1f7727ba13
|
a simple micro switch model
|
2013-10-15 00:03:15 +08:00 |
|
Glen Chung
|
8eac50eda2
|
adding X stepper and gears
|
2013-10-14 23:58:47 +08:00 |
|
Glen Chung
|
ff2784b2b3
|
spindle motor length from my BOM
|
2013-10-13 23:48:49 +08:00 |
|
Glen Chung
|
29973e965a
|
code refactoring for spindle motor length adjustment
|
2013-10-13 23:47:42 +08:00 |
|
Glen Chung
|
1452f1db5f
|
Stepper dimension from my BOM
|
2013-10-13 23:14:32 +08:00 |
|
Glen Chung
|
de84a831f6
|
Original Nema17 dimension from MCAD
|
2013-10-13 23:13:38 +08:00 |
|
Glen Chung
|
76a389ad2b
|
adding stepper, bearing, washer, nuts for Y axis
|
2013-10-13 03:53:14 +08:00 |
|
Glen Chung
|
cedd4ac588
|
naming cyclone_motor_gear module
|
2013-10-13 02:18:58 +08:00 |
|
Glen Chung
|
d2b7e0fe38
|
naming cyclone_rod_gear module
|
2013-10-13 02:13:56 +08:00 |
|
Glen Chung
|
8ce990d0be
|
code refactoring for better spindle position simulation
|
2013-10-11 00:42:31 +08:00 |
|
Glen Chung
|
83ee05e354
|
add 150x100x1.5mm PCB board for size checking
|
2013-10-11 00:37:43 +08:00 |
|
Glen Chung
|
21278acd97
|
display work bed dimension
|
2013-10-11 00:36:18 +08:00 |
|
Glen Chung
|
086e490f89
|
code refactoring for better adjusting final Y smooth/threaded rod length
|
2013-10-11 00:35:47 +08:00 |
|
Glen Chung
|
7ca3f50361
|
code refactoring for better adjusting final X smooth/threaded rod length
|
2013-10-11 00:34:23 +08:00 |
|
Glen Chung
|
ca4568e40f
|
code refactoring for better adjusting wood base dimension
|
2013-10-11 00:33:03 +08:00 |
carlosgs
|
2ec7c3f431
|
Delete both_gears.stl
|
2013-10-04 15:43:20 +02:00 |
|
carlosgs
|
09358b5519
|
Moved BOMs to the front page
|
2013-09-27 17:12:04 +02:00 |
|
Carlos Garcia Saura
|
271a8d1ee0
|
Merged Harry Binnema's improvements
|
2013-09-27 01:21:56 +02:00 |
|
Carlos Garcia Saura
|
e206e24791
|
Repository re-organisation
|
2013-09-27 01:08:41 +02:00 |
|
Carlos Garcia Saura
|
8d8c314707
|
Added improvements by Harry Binnema: better gears and symmetric Z carriage
|
2013-09-26 23:43:30 +02:00 |
|
Carlos Garcia Saura
|
fd7486901e
|
Merged the improvements by Harry Binnema
|
2013-09-26 23:39:58 +02:00 |
|
carlosgs
|
743118fa0d
|
Re-structuration of the repository, updated readme files for each section
|
2013-09-26 19:43:09 +02:00 |
|
Carlos Garcia Saura
|
d389a67ab2
|
Increased thickness of the smooth rod fix. Thanks Harry Binnema for reporting the issue!
|
2013-09-14 01:35:47 +02:00 |
Mark Villacampa
|
2d29aa0c2a
|
add X carriage nut holder for 6.2mm thick nuts
|
2013-09-08 14:59:34 +02:00 |
|
Carlos Garcia Saura
|
c12d10b555
|
Vertical Z smooth rod holes made smaller so they fit tight
|
2013-08-05 15:54:22 -07:00 |
|
Carlos Garcia Saura
|
4ab1d66a2a
|
Added flat DXFs for milling/cutting the frames instead of printing (as proposed by Xander in the mail list)
|
2013-08-02 22:13:01 -07:00 |
|
Carlos Garcia Saura
|
b5333268e1
|
Added Y_rod_idler mirrored (thanks Mike!)
|
2013-08-02 11:42:58 -07:00 |
|
Carlos Garcia Saura
|
8676afa780
|
Fixed mirroring, thanks Tom for noticing!
|
2013-07-29 11:33:18 -07:00 |
|
carlosgs
|
0cabeb3bb9
|
Larger hole for the Z threaded rod in the bottom piece
|
2013-06-02 15:35:50 +02:00 |
|
carlosgs
|
3eb12b17e3
|
v0.9.7 with new Z carriage
|
2013-06-02 15:30:29 +02:00 |
|
carlosgs
|
0b22ee515a
|
Updated templates to match new Y motor axis. Added the new gears (1.4 ratio, being tested)
|
2013-06-01 17:32:13 +02:00 |
|
carlosgs
|
be89290358
|
Thicker version of the Y axis motor/idle stands
|
2013-06-01 13:26:16 +02:00 |
|
carlosgs
|
9da33e0e09
|
Deleted file from old version
|
2013-06-01 12:50:59 +02:00 |
|
carlosgs
|
695934c55e
|
Recompiled frame.stl, it had been overwritten
|
2013-05-28 13:23:24 +02:00 |
|
carlosgs
|
e693093d52
|
Added Yopero's improvement for the Y axis (idle stand)
|
2013-05-28 13:21:43 +02:00 |
|
carlosgs
|
8b0a4634b9
|
First gerber2gcode tests, work in progress!
|
2013-05-28 00:29:00 +02:00 |
|
carlosgs
|
e88354183e
|
Improved frames: thicker stands + easier motor adjustment
|
2013-05-26 14:28:10 +02:00 |
|
carlosgs
|
41fde5fd5f
|
Removed Yopero's STL for the Y axis to avoid confusion.
Added video to the README
|
2013-05-26 11:44:09 +02:00 |