15aadc258e
six of 2.9 x 16mm self tapping screws for both frames
2013-10-16 22:43:58 +08:00
9120a0de40
four of M3 x 8mm to mount X motor
2013-10-16 22:32:25 +08:00
79229527de
fix motor gear
2013-10-16 22:31:58 +08:00
d486d3a790
X motor dimension from my BOM
2013-10-16 22:31:08 +08:00
00d772eac6
Y micro switch assembly was wrong
2013-10-16 22:18:42 +08:00
a310df8533
add M3 x 8mm grub screw to attach Gear to motor shaft
2013-10-16 08:33:30 +08:00
e4f6ee34b7
1. move M3 x 8mm grub screw to motor_gear.scad
...
2. more comments
3. BlackPaint micro switch
2013-10-16 08:25:38 +08:00
bd1ff22a7f
screws for micro switch assembly
2013-10-16 00:05:26 +08:00
03774e6530
more parts for assembly instruction
2013-10-15 23:39:03 +08:00
3a69141e0a
Y micro switch
2013-10-15 00:03:43 +08:00
1f7727ba13
a simple micro switch model
2013-10-15 00:03:15 +08:00
8eac50eda2
adding X stepper and gears
2013-10-14 23:58:47 +08:00
ff2784b2b3
spindle motor length from my BOM
2013-10-13 23:48:49 +08:00
29973e965a
code refactoring for spindle motor length adjustment
2013-10-13 23:47:42 +08:00
1452f1db5f
Stepper dimension from my BOM
2013-10-13 23:14:32 +08:00
de84a831f6
Original Nema17 dimension from MCAD
2013-10-13 23:13:38 +08:00
76a389ad2b
adding stepper, bearing, washer, nuts for Y axis
2013-10-13 03:53:14 +08:00
cedd4ac588
naming cyclone_motor_gear module
2013-10-13 02:18:58 +08:00
d2b7e0fe38
naming cyclone_rod_gear module
2013-10-13 02:13:56 +08:00
8ce990d0be
code refactoring for better spindle position simulation
2013-10-11 00:42:31 +08:00
83ee05e354
add 150x100x1.5mm PCB board for size checking
2013-10-11 00:37:43 +08:00
21278acd97
display work bed dimension
2013-10-11 00:36:18 +08:00
086e490f89
code refactoring for better adjusting final Y smooth/threaded rod length
2013-10-11 00:35:47 +08:00
7ca3f50361
code refactoring for better adjusting final X smooth/threaded rod length
2013-10-11 00:34:23 +08:00
ca4568e40f
code refactoring for better adjusting wood base dimension
2013-10-11 00:33:03 +08:00
2ec7c3f431
Delete both_gears.stl
2013-10-04 15:43:20 +02:00
09358b5519
Moved BOMs to the front page
2013-09-27 17:12:04 +02:00
271a8d1ee0
Merged Harry Binnema's improvements
2013-09-27 01:21:56 +02:00
e206e24791
Repository re-organisation
2013-09-27 01:08:41 +02:00
8d8c314707
Added improvements by Harry Binnema: better gears and symmetric Z carriage
2013-09-26 23:43:30 +02:00
fd7486901e
Merged the improvements by Harry Binnema
2013-09-26 23:39:58 +02:00
743118fa0d
Re-structuration of the repository, updated readme files for each section
2013-09-26 19:43:09 +02:00
d389a67ab2
Increased thickness of the smooth rod fix. Thanks Harry Binnema for reporting the issue!
2013-09-14 01:35:47 +02:00
2d29aa0c2a
add X carriage nut holder for 6.2mm thick nuts
2013-09-08 14:59:34 +02:00
c12d10b555
Vertical Z smooth rod holes made smaller so they fit tight
2013-08-05 15:54:22 -07:00
4ab1d66a2a
Added flat DXFs for milling/cutting the frames instead of printing (as proposed by Xander in the mail list)
2013-08-02 22:13:01 -07:00
b5333268e1
Added Y_rod_idler mirrored (thanks Mike!)
2013-08-02 11:42:58 -07:00
8676afa780
Fixed mirroring, thanks Tom for noticing!
2013-07-29 11:33:18 -07:00
0cabeb3bb9
Larger hole for the Z threaded rod in the bottom piece
2013-06-02 15:35:50 +02:00
3eb12b17e3
v0.9.7 with new Z carriage
2013-06-02 15:30:29 +02:00
0b22ee515a
Updated templates to match new Y motor axis. Added the new gears (1.4 ratio, being tested)
2013-06-01 17:32:13 +02:00
be89290358
Thicker version of the Y axis motor/idle stands
2013-06-01 13:26:16 +02:00
9da33e0e09
Deleted file from old version
2013-06-01 12:50:59 +02:00
695934c55e
Recompiled frame.stl, it had been overwritten
2013-05-28 13:23:24 +02:00
e693093d52
Added Yopero's improvement for the Y axis (idle stand)
2013-05-28 13:21:43 +02:00
8b0a4634b9
First gerber2gcode tests, work in progress!
2013-05-28 00:29:00 +02:00
e88354183e
Improved frames: thicker stands + easier motor adjustment
2013-05-26 14:28:10 +02:00
41fde5fd5f
Removed Yopero's STL for the Y axis to avoid confusion.
...
Added video to the README
2013-05-26 11:44:09 +02:00
df6c2ad976
Improved Y axis with Yopero's suggestion.
...
Z carriage shows the name of the machine, using orbitron.dxf font from Write.scad.
Updated templates and renders.
Updated README to show changes.
2013-05-26 11:26:32 +02:00
30cd3a10f4
Create motor_stand_2_screw_terminals.stl
...
"y" motor stand provided with 2 bases/screw terminals. Seems to be much more robust than the single legged version.
If needed I can upload de .scad file although it is not following the programming style of the original file, it is more an add-on.
2013-05-26 02:01:07 +03:00
Glen Chung
carlosgs
Mark Villacampa
yOPERO