-p-formation-control/OTHER/abstract.tex

30 lines
1.6 KiB
TeX
Raw Permalink Normal View History

2014-02-19 01:23:11 +07:00
%
% Halaman Abstract
%
% @author Andreas Febrian
% @version 1.00
%
2021-07-20 19:35:18 +07:00
\chapter*{\textit{Summary} }
2014-02-19 01:23:11 +07:00
2021-07-20 19:35:18 +07:00
% \vspace*{0.2cm}
2014-02-19 01:23:11 +07:00
2021-07-20 19:35:18 +07:00
% \noindent \begin{tabular}{l l p{11.0cm}}
% Name&: & \penulis \\
% Program&: & \program \\
% Title&: & \judulInggris \\
% \end{tabular} \\
% \vspace*{0.5cm}
\textbf{ \penulis},\textit{ \EnGelar \ \EnJurusan \ \EnFakultas , \EnFakultas \ \EnNamaUni , \bulanTahun , \textit{\judulInggris}, }
\textit{Academic Supervisor} : \pembimbingSatu and \pembimbingDua.
2014-02-19 01:23:11 +07:00
2021-07-20 19:35:18 +07:00
% \noindent % \todo{Write your abstract here.}\\
\textit{ Formation control is a research topic of multi-robot control, where a group of robots can reach a certain formation and defend it when moving in the desired direction. One of the developments is distance-based where formation goals achieved using the distance between each other only. Many developments are using a simple model and need further development into a realistic model. When applying distance-based, there is a problem in the initial condition, namely that the robot cannot find the coordinates of its neighbors when using only distance. In this work, the cosine algorithm was developed as a solution to the initial conditions which are inspired by a simple triangle formula and need only two steps to find the coordinates. From simulation experiment results, distance-based formation control using three holonomic robot models and the application of the cosine algorithm takes an average of 6.5 seconds to find the coordinates of its neighbors.}
2014-02-19 01:23:11 +07:00
2021-07-20 19:35:18 +07:00
% \vspace*{0.2cm}
2014-02-19 01:23:11 +07:00
2021-07-20 19:35:18 +07:00
% \noindent
Keywords:Formation Control, Multi-robot, Cosine Algorithm, Mobile Robot.\\
% \noindent \todo{Write up keywords about your report here.}
2014-02-19 01:23:11 +07:00
\newpage