The stepper-motor and biaxial-stepper parts only decoded a one-hot wave-drive coil sequence, so they never rotated under the common two-phase full-step / Stepper.h / AccelStepper drive that Wokwi's own examples use -- only the servo moved. Rewrote both decoders to track the net magnetic-field vector of the coils (atan2 of the H-bridge currents), so the rotor follows wave, two-phase full-step and half-step drive alike, whether driven directly from GPIO or through a driver's outputs.
Also adds an A4988 STEP/DIR stepper driver (parity with Wokwi's wokwi-a4988): velxio-a4988 element renders the real Pololu A4988 Fritzing breadboard SVG (public/components/a4988.svg); MotorDriverParts.ts finds the wired stepper via the netlist and advances it one (micro)step per STEP rising edge in the DIR direction (MS1-3 microstep + active-low ENABLE). Metadata in component-overrides.json. Three examples (Uno/ESP32/Pico) wire MCU STEP/DIR -> A4988 -> stepper, coil map aligned to Wokwi (1A->B+,1B->B-,2A->A+,2B->A-).
Verified in-browser: motor rotates on Arduino Uno (avr8js) and Raspberry Pi Pico (rp2040js). tsc --noEmit clean.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
0d5a1d5838
