83 lines
4.8 KiB
Plaintext
83 lines
4.8 KiB
Plaintext
# QEMU-optimized sdkconfig for ESP32 emulation. Templated from
|
|
# sdkconfig.defaults.in by ESPIDFCompiler._render_sdkconfig() at compile
|
|
# time. ${TOKEN} placeholders are substituted with the user's Board Options
|
|
# selections (or per-target defaults when missing).
|
|
|
|
# ── Flash ────────────────────────────────────────────────────────────────
|
|
# QEMU's esp32-picsimlab machine historically only boots DIO @ 40 MHz with
|
|
# the 4 MB image. Larger images and other flash modes are allowed but the
|
|
# UI surfaces a "QEMU may fail to boot" warning for non-DIO.
|
|
${FLASH_MODE_LINES}
|
|
${FLASH_FREQ_LINES}
|
|
${FLASH_SIZE_LINES}
|
|
|
|
# ── Partition table ──────────────────────────────────────────────────────
|
|
# Custom CSV written next to this file by _render_partition_csv.
|
|
CONFIG_PARTITION_TABLE_CUSTOM=y
|
|
CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
|
|
|
|
# ── Bootloader ───────────────────────────────────────────────────────────
|
|
# Minimal logging to speed up QEMU boot.
|
|
CONFIG_BOOTLOADER_LOG_LEVEL_NONE=y
|
|
|
|
# ── Logging ──────────────────────────────────────────────────────────────
|
|
# Default log level — WARN so users see only their Serial.print + real warnings.
|
|
# Internal ESP-IDF info-level chatter (gpio:, wifi:, phy:) is suppressed.
|
|
# Override per-tag with esp_log_level_set() at runtime if needed.
|
|
CONFIG_LOG_DEFAULT_LEVEL_WARN=y
|
|
CONFIG_LOG_DEFAULT_LEVEL=2
|
|
|
|
# Arduino core debug level (ARDUHAL_LOG_*). Driven by the user's
|
|
# Core Debug Level dropdown.
|
|
CONFIG_ARDUHAL_LOG_DEFAULT_LEVEL=${ARDUHAL_LOG_LEVEL}
|
|
|
|
# ── Watchdogs ────────────────────────────────────────────────────────────
|
|
# Disabled for QEMU (timing is not real-time).
|
|
CONFIG_ESP_TASK_WDT=n
|
|
CONFIG_ESP_INT_WDT=n
|
|
|
|
# ── Compiler ─────────────────────────────────────────────────────────────
|
|
CONFIG_COMPILER_OPTIMIZATION_SIZE=y
|
|
|
|
# ── CPU frequency ────────────────────────────────────────────────────────
|
|
${CPU_FREQ_LINES}
|
|
|
|
# ── PSRAM ────────────────────────────────────────────────────────────────
|
|
${PSRAM_LINES}
|
|
|
|
# ── WiFi ─────────────────────────────────────────────────────────────────
|
|
CONFIG_ESP_WIFI_ENABLED=y
|
|
|
|
# ── LWIP — reassembly needed for slirp networking ────────────────────────
|
|
CONFIG_LWIP_IP4_REASSEMBLY=y
|
|
CONFIG_LWIP_IP6_REASSEMBLY=y
|
|
|
|
# ── FreeRTOS ─────────────────────────────────────────────────────────────
|
|
CONFIG_FREERTOS_HZ=1000
|
|
|
|
# ── Console ──────────────────────────────────────────────────────────────
|
|
CONFIG_ESP_CONSOLE_UART_DEFAULT=y
|
|
|
|
# ── Arduino-as-component: we provide our own app_main (main.cpp) ─────────
|
|
CONFIG_AUTOSTART_ARDUINO=n
|
|
|
|
# Which core Arduino's setup/loop and event task run on. Both default to
|
|
# core 1 (matches Arduino IDE) but the user can pin them independently.
|
|
CONFIG_ARDUINO_RUNNING_CORE=${ARDUINO_RUNNING_CORE}
|
|
CONFIG_ARDUINO_EVENT_RUNNING_CORE=${ARDUINO_EVENT_RUNNING_CORE}
|
|
|
|
# Increase main task stack for Arduino sketches.
|
|
CONFIG_ESP_MAIN_TASK_STACK_SIZE=8192
|
|
|
|
# Enable C++ exceptions (some Arduino libraries require it).
|
|
CONFIG_COMPILER_CXX_EXCEPTIONS=y
|
|
|
|
# ── Bluetooth ────────────────────────────────────────────────────────────
|
|
# Bluedroid stack — the default arduino-esp32 BLEDevice.h library targets
|
|
# Bluedroid, not NimBLE. NimBLE-based sketches (NimBLEDevice.h) will not
|
|
# compile under this config; flip stacks if needed.
|
|
CONFIG_BT_ENABLED=y
|
|
CONFIG_BT_BLUEDROID_ENABLED=y
|
|
CONFIG_BTDM_CTRL_MODE_BR_EDR_BLE=y
|
|
CONFIG_BT_BLE_ENABLED=y
|