Adds a third entry to the board language selector next to Arduino C++
and MicroPython: ESP-IDF. In this mode the user writes a plain ESP-IDF
project — app_main() entry point, FreeRTOS + driver APIs — and the
backend compiles it through the same ESP-IDF toolchain it already uses
for ESP32 Arduino sketches, just without the arduino-esp32 component.
Backend:
- CompileRequest.language ('espidf') threaded through the sync + async
compile paths and folded into the dedup job key (language='arduino'
and omitted hash identically so old clients keep dedupping).
- espidf_compiler: pure_idf flag. User files are written into main/
as-is (no Arduino.h wrap, no velxio_compat.h, Arduino library
resolution skipped), ARDUINO_ESP32_PATH is dropped from the build env
and VELXIO_PURE_SKETCH raised so the template CMake compiles the
user's own sources via a glob branch. Pure builds get their own
persistent build-dir variant through the eff_hash fold.
- QEMU WiFi compat for IDF-style code: esp_wifi.h/esp_wifi_init
detection sets has_wifi, and literal #define SSID/PASS plus
wifi_config_t designated initializers are normalized to the QEMU AP.
- CONFIG_ARDUINO_* lines are stripped from sdkconfig.defaults in pure
mode (the symbols don't exist without the arduino component).
Frontend:
- LanguageMode gains 'espidf'; BOARD_SUPPORTS_ESPIDF covers the ESP32
family (Xtensa, S3, C3). Toolbar shows the option only for those.
- Switching modes seeds a main.c blink skeleton (app_main + gpio
driver), mirroring the MicroPython main.py flow.
- compileCode sends language='espidf'; run/stop paths are unchanged
(the QEMU worker consumes the same merged flash image).
- New gallery example: esp32-idf-blink (LED + resistor on GPIO 2).
Tests: unit coverage for the build-env switch, IDF wifi normalization,
job-key variance, file-group seeding and the new example; verified
end-to-end in a container from the prod image (pure build produces a
bootable flash image; Arduino-mode build unchanged, same variant hash).
Two issues from a real ESP32 7-segment clock the agent built.
Run after the agent didn't work until a page reload
---------------------------------------------------
The agent's run_simulation leaves the ESP32 board RUNNING (live QEMU
WebSocket). Esp32Bridge.connect() is a no-op while the socket is non-CLOSED,
so the user's subsequent Run click called startBoard() → connect() → did
NOTHING. And if the backend QEMU session had since died while the frontend
socket lingered (CONNECTING/OPEN/CLOSING), the user saw a dead sim that only
a reload cleared — exactly the "di Run y no funcionó; recargué y sí" report.
The Arduino/C++ QEMU path now stops a running board first (closing the WS),
waits for it to settle, then boots fresh — the MicroPython path already did
this for the same reason.
Wires painted over the 7-segment digits
----------------------------------------
The agent bridges each segment strip to its resistor from a breadboard hole
that is physically UNDER the seated display; on the flat canvas those wires
(wire layer z 35) painted over the digits (component z 1) — "casi ni se ven
los dígitos". A large-bodied display seated on a breadboard now renders
ABOVE the wire layer, so its face occludes the wires crossing it exactly as
the real part's body would (the wire passes behind it to reach the hole).
Scoped to display bodies (7segment, matrix, oled, lcd, ili9341, led-ring…)
and only when actually seated; thin parts and free-floating displays are
untouched. The pin overlay + seated-pin markers share the display's stacking
group, so they rise with it and wiring still works.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
verifyCircuitFromStore() builds the worst-case snapshot (every wired
digital pin driven HIGH) and solves it — extracted verbatim from
EditorToolbar's runVerification so programmatic runners (editor
extensions, agents) can gate their own run paths on the same rules.
No behavior change for the Run button.
The file-tabs strip in the toolbar center duplicated affordances that
already exist elsewhere: the file it showed is selected in the left file
explorer, and its board-owner label duplicated the board selector combo.
It also ate horizontal space and crowded the action row on narrow panes.
Remove the FileTabs component entirely; the left explorer is now the single
place to switch files. The toolbar center slot stays as an empty flex
spacer so the right action group remains pinned to the far right.
In a multi-board project the wired boards are one system, so running just
the active board almost never matches intent (a cross-wired UART pair only
comes alive when both run). The primary Run button now runs ALL boards when
there is more than one, with a split caret-menu to still run only the active
board. Single-board and board-less behaviour is unchanged, and the separate
Run-All double-triangle button is kept only for board+chip / chips-only
projects where the primary Run is not already a run-all.
handleCompile() wiped all logs at the start, including the 'Circuit check'
group the pre-flight verifier had just logged (e.g. an over-voltage warning).
A Run auto-compiles right after verification, so the warning vanished. Preserve
circuit-check entries on compile, same as the boardless path already did.
Clicking Run runs a pre-flight circuit-verification SPICE solve before
compiling. On a cold ngspice worker that solve takes a second or two, but the
Run button kept showing the play icon and stayed enabled, so it looked dead
and got clicked repeatedly -- each click stacking another verification (the
reported 6x [handleRun] click).
- Add a `verifying` state: the Run button now shows the same spinner as the
Compile button and is disabled while the pre-flight solve runs.
- Synchronous re-entrancy guard (runInFlightRef) ignores re-clicks while a
verification is already in flight.
The runtime burnout / pre-flight messages used an inline `setMessage` toast
that rendered as a bar near the Run/Stop buttons and overlapped them. Route
all circuit findings into the compile output console instead — one unified,
red/orange diagnostics log next to the compiler output (Proteus-style):
- New "Circuit check" console group (CIRCUIT_CHECK_TARGET). checkOrBlock logs
every error (red) / warning (orange) there and opens the console; the
blocking modal is kept for the explicit Run-anyway / Cancel decision.
- Runtime `velxio-circuit-fault` events (LED burnout) log to the same group
instead of the toast; no auto-open (the continuous solver can fault on load).
- Warnings-only no longer pop a toast — the console entry is the record.
- The run-path clears preserve circuit-check entries so findings survive a
"Run anyway" auto-compile.
The Run (and Run All) buttons were wired `onClick={handleRun}`, so React
passed the click event as the first argument. handleRun(skipVerify=false)
then treated the truthy event as skipVerify=true and skipped checkOrBlock
entirely -- the pre-flight circuit verifier never ran on a button click.
This is the real reason a 9V battery wired straight to an LED ran with no
warning even though the verifier exists and is correct (project 2840fd12).
- onClick={() => handleRun()} and onClick={() => handleRunAll()} so
skipVerify stays at its false default.
- Give handleRunAll the same checkOrBlock pre-flight gate handleRun has.
Verification failing silently in production is otherwise hard to spot — the
rules read 0 A when branch currents are missing. Log the errors/warnings,
whether a solve landed, and which branch/node vectors came back.
The pre-flight circuit verifier reads branch currents via runNetlist ->
readAllCurrentVectors() (ngSpice_AllVecs enumeration). The production
Web-Worker ngspice WASM build does not surface voltage-source #branch
vectors through that enumeration for an .op plot, so branchCurrents came
back empty and every current rule (short-circuit, LED over-current) read
?? 0 -> no fault. The live solver avoided this by requesting each current
explicitly by name; the Node test build enumerates them, so the gap was
invisible to the suite. Net effect: a 9V battery wired straight to an LED
ran with no warning (reported on project 2840fd12).
- runNetlist: request every V_* source branch current explicitly by name
and merge with the enumeration, so source/LED currents are always present
regardless of the worker WASM's AllVecs behaviour.
- circuitVerifier: non-finite source/LED current -> blocking unstable-solve
fault ("could not solve a stable current - likely a short or a part with
no current limit, e.g. an LED with no series resistor").
- LED runtime (BasicParts): burn out on a non-finite current instead of
falling through to the digital fallback and glowing; raise burnout
threshold 20mA -> 100mA so high-power/RGB channels are not falsely
destroyed; clear the burnt latch on Reset (resetBoard bumps hexEpoch).
Tests: real-data repro, mocked non-finite verifier test, runtime
non-finite / high-power / latch-recovery tests.
Library manifests are now PER-BOARD (each board carries its own velxio.json),
so two boards in one project can use different (even conflicting) libraries
without clashing — the multi-board extension of the no-clash guarantee.
- board.libraries on BoardInstance + serialisableBoard: rides in boards_json,
so it round-trips, dirty-checks, autosaves and restores natively. This also
removes the load-restore hacks (useLibraryManifestStore + applyProjectManifest
deleted): the manifest is plain board state.
- loadProjectState now restores per-board boardOptions/spiffsFiles/libraries
(it previously dropped them).
- EditorToolbar single + compile-all send the COMPILING board's libraries.
- Backend compile.py prefers the client's per-board request.libraries; the
project-level libraries_json (now the union of all boards) is the fallback.
- buildLoadPayload migrates pre-per-board projects: seed each board with the
project union so they keep compiling scoped.
- Library Manager 'In project' tab edits the ACTIVE board's velxio.json (shows
the board name) and the add field is now an autocomplete (installed libs +
index search) so users pick from a list instead of typing names.
Deletes useLibraryManifestStore.ts + applyProjectManifest.ts.
End users can now configure a project's declared libraries (the compile scope):
- Library Manager gains an 'In project' tab = the project's velxio.json:
declared libs as removable rows, quick add-by-name, and a raw velxio.json
editor. Installing a library auto-adds it to the project. Installed-tab rows
get an 'Add to project' toggle.
- FileExplorer shows a velxio.json entry (with declared count) that opens the
Library Manager via a window event the toolbar listens for.
- applyProjectManifest(): restore a saved project's manifest into the store on
load so the editor/toolbar/Library Manager/velxio.json reflect it.
- computeProjectStateHash() includes the manifest so declaring a library marks
the project dirty and autosaves.
Note: the OSS ProjectByIdPage also calls applyProjectManifest for parity, but
velxio.dev routes the pro-overlay ProjectByIdPage (wired separately).
Activates manifest-scoped ESP-IDF resolution for the gallery. loadExample now
records the example's declared libraries in useLibraryManifestStore; EditorToolbar
passes them to compileCode, which sends them as `libraries` in the compile
request. The backend then merges exactly those libraries (P2.0 scope) instead of
picking a stray same-named lib from the shared dir.
Safe: a core-only example sends null (legacy scan-all); a stale/incomplete
manifest degrades to scan-all via the backend graceful fallback, never a wrong
build. Ignored by the backend for non-ESP32 (arduino-cli) boards. Example
manifests were completed (incl. transitive deps) in c671c9b.
Phase 4 of the run-system work. The compile console now groups output into a
section per run target (board or chip) with a status glyph and label, the way
multiple Arduinos already stream — instead of one flat list.
- CompilationLog gains an optional target { id, label, kind: 'board'|'chip' }.
message/type are unchanged so the pro overlay (diagnose-with-AI prompt +
errorCount slot) and the console's length-based clear/auto-error heuristics
are untouched. parseCompileResult stamps the target on every produced line.
- Producers stamp their lines: compileAllBoards (per-board, dropping the old
'<label>: ' string prefix the header now carries), prepareCustomChips
(per-chip, WASM + ROM), handleCompile + handleRun MicroPython (single board) —
including the Pi / MicroPython / FQBN / error paths so a target's lines never
fragment across sections.
- CompilationConsole groups filteredLogs into consecutive-run sections at RENDER
time only (the flat array is unchanged); each target section shows ✓/✕/▸ +
name + kind tag, with no-target lines ('Compiling all targets', 'Done') as
plain narration around them.
Reviewed by an adversarial pass; the flagged un-stamped edge paths (Pi /
MicroPython / single-board errors) are now stamped.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Phase 3 of the run-system work. Generalises the boards-only Compile-All/Run-All
to RUN TARGETS = boards + programmable custom-chips, so a board+chip or several
chips compile and run together, the same way multiple Arduinos do.
- targetCount = boards + programmable chips; the Compile-All/Run-All buttons now
appear when targetCount > 1 (was boards.length > 1). Cheap string predicate
(no JSON.parse) since the selector runs on every sim tick.
- compileAllBoards builds chips (WASM+ROM) AND boards; works with zero boards;
prepareCustomChips now returns a failure count folded into the Done summary so
a failed chip no longer shows green / calls markCompiled.
- handleRunAll: compiles all targets, starts every board, then restartParts() so
chips pick up fresh WASM/ROM, and resumes the electrical solver when NO board
actually started (board-less, or a board that compiled to nothing) so chips
aren't left frozen.
Review fixes (2-agent adversarial pass):
- Stop now stops EVERY running board (Run-All can start several); otherwise a
non-active board kept the chip ticking after Stop.
- Run-All / Stop disabled gates use anyBoardRunning (+ digitalRunning) instead of
the flat active-board flag, which misreports multi-target runs.
- shared isQemuBoardKind() helper so handleRun and handleRunAll can't drift.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Phase 2 of the run-system/UX work.
- BoardInstance gains an optional user ; boardDisplayName(board) resolver
(name || kind label) routes every INSTANCE-label surface: file-explorer
section header, compile console (EditorToolbar), canvas selector/tooltip/
context-menu, Serial Monitor tabs, Oscilloscope board picker, Board Options
subtitle. Board/component pickers keep the KIND label (they pick new boards).
- Inline rename on board AND chip section headers (double-click the name, or a
hover pencil button). Board -> updateBoard(id,{name}); chip -> chipName in
properties. Enter commits, Escape cancels (cancel-flag ref guards the
unmount-fires-onBlur footgun), empty clears to the kind / 'Custom Chip'.
- FileTabs shows an owner badge naming the board/chip whose files are shown
(resolved as a selector so it doesn't re-render on every sim pin toggle).
- CustomChipDialog no longer clobbers a user-given chipName: chip.json's name
only seeds the blank defaults (My Chip / Custom Chip); loading an example
relabels explicitly.
- Persistence: board name round-trips via projectPayload (+ dirty hash),
vlxFile, ProjectByIdPage load + loadProjectState; chipName rides components_json.
- Drive-by: fixed a pre-existing rules-of-hooks violation in BoardOptionsModal
(early return before a useCallback).
Reviewed by a 3-agent adversarial pass (completeness / persistence / correctness);
all major findings folded in.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Phase 1 of the run-system/UX work.
Stop bug: a programmable chip kept running after Stop when a board was present.
The chip rAF tick gated only on board presence (!boardless), so with a board it
ticked forever. Now it gates on the actual run state: board-less -> electrical
paused flag; with board(s) -> board.running. handleStop also clears every chip's
output drives (clearAllChipDrives) and re-solves so chip-driven LEDs go dark on
Stop instead of freezing at their last frame.
Examples to board-less (regulated power supply, no Arduino — the Arduino only
ever supplied 5V):
- z80-larson-scanner -> 'Z80 Comet Scanner': board-less, a faster TWO-LED comet
(scanner.s) so it's visually distinct from z80-larson-no-board's single-bit
walk; green/blue LEDs.
- i8080-killbits -> board-less (psu + resistors), keeps killbits.s as the chip's
editable program; buttons re-powered from the supply.
- i8080-button-counter -> board-less (psu + resistors); behaviour chip, program
baked in, so it shows a note (no editable file) and runs standalone.
banner-streamer stays Arduino-based (its TX/RX go through the AVR USART bridge).
- CustomChipPart: run-state-aware tick gate.
- EditorToolbar: clearAllChipDrives() helper + handleStop clears chip drives.
- examples-retro-intel: 3 conversions; drop now-unused sketch consts; add the
larsonScannerAsm comet program.
- Tests: board+chip routing now uses an inline synthetic example (gallery chip
examples are all board-less).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A programmable custom-chip (a CPU emulator that runs a ROM/program, e.g. the
Z80 or 8080) now keeps its program (larson.s, chaser.c, ...) in a dedicated
editor file group — group-chip-<chipId> — rendered as its own collapsible
section in the file explorer, exactly like each board owns its sketch group.
Behaviour/driver chips and predefined chips carry no programFile and get no
group; they stay editable only in the chip designer.
Fixes two reported issues on the Z80 examples:
- /example/z80-larson-no-board: the board-less chip example now opens its
program (larson.s) as the active group, editable on the left — previously
the editor showed but no file appeared.
- /example/z80-led-chaser-c: the chip program (chaser.c) no longer shows as
a sibling tab inside the Arduino sketch group; it sits in its own chip
section instead. The board group shows only sketch.ino.
Details:
- useEditorStore: chipFileGroupId()/CHIP_GROUP_PREFIX helpers.
- loadExample: seedChipProgramGroups() routes each chip's programFile into its
own group (seeded from the example files), sweeps stale chip groups, keeps
the program OUT of the board group, and for a board-less chip example makes
the chip group active so the program is the editable file shown.
- EditorToolbar.prepareCustomChips: resolves the program from the chip's own
group (falls back to board files for older projects) before assembling ROM.
- FileExplorer: renders one collapsible section per programmable chip with an
IC icon; clicking switches the editor to the chip group. Lazy-creates a
group for chips dropped on the canvas.
- projectPayload + vlxFile: serialise chip groups alongside board groups and
include them in the dirty-check hash, so chip-program edits persist on
save / autosave / .vlx export and round-trip via replaceFileGroups on load.
- Regression tests for board-less + board+chip routing and stale-group sweep.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Velxio can now simulate one or more custom-chip CPUs with NO Arduino/ESP32
board on the canvas — a general-purpose electronics simulator, not an
MCU-only one.
- DynamicComponent: board-less parts get the real shared flat PinManager
(instead of a no-op stub) so a custom chip's digital pin writes/reads reach
the LEDs/inputs wired to it.
- CustomChipPart: the rAF tick respects board-less Run/Stop (freezes while
the electrical sim is paused); board behaviour is unchanged.
- EditorToolbar.handleRun: board-less Run compiles each chip's WASM/ROM and
re-attaches the parts (restartParts) so they pick up the fresh WASM, then
resumes the solver.
- useSimulatorStore.restartParts(): bump hexEpoch to force part re-attach.
- New example "Z80 Larson Scanner (no board)": a programmable Z80 + 8 LEDs +
the adjustable power-supply component, no MCU. The chip drives the LEDs
through the synthetic-pin + ngspice path added earlier.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Compile/Run now makes every custom-chip on the canvas live in a single
click instead of requiring a manual trip through the chip designer plus a
separate ROM compile:
- Each custom-chip's C source is auto-compiled to WASM when it has none
yet (via /api/compile-chip), and programmable CPU chips get their
program file (larson.s, chaser.c, ...) assembled/compiled to ROM bytes
(via /api/compile-rom) and injected, all before the board starts.
- Chip-program files are excluded from the arduino-cli sketch build, so
SDCC-only syntax such as __at(0xC000) no longer breaks the Arduino
compile (this is what made the Z80 LED-chaser-C example error out).
Fixes the Z80 examples that either errored on Run (z80-led-chaser-c) or
compiled but did nothing (z80-larson-scanner, whose chip never had WASM
or ROM). Works for any circuit built from scratch with a programmable
CPU chip, not just the bundled examples.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Adds stm32-f4-discovery, stm32-olimex-h405, stm32-netduino-plus2, stm32-netduino2, stm32-blackpill-f401 and stm32-bluepill-f103cb, mapped to existing qemu-lcgamboa machines (netduinoplus2, olimex-stm32-h405, netduino2, stm32vldiscovery). A generic inline board renderer (no SVG) draws the Discovery/Olimex/Netduino boards from a header pin layout; the Pill variants reuse the Blue/Black Pill SVGs. Per-board onboard-LED pin and polarity via STM32_LED. One blink+serial example per board.
tsc --noEmit clean; all new FQBN pnum variants present in STM32 core 2.12.0; worker smoke tests pass for the new machines.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
STM32 emulation (open-core, runs via libqemu-arm in the backend worker):
- backend: stm32_lib_manager + stm32_worker (GPIO, USART, I2C/SPI device models
reusing the ESP32 slaves, live sensor updates), arduino_cli STM32 branch,
start_stm32 simulation route.
- frontend: Stm32Bridge + Stm32BluePill(/BlackPill) web components (Wokwi SVGs),
board kinds, Interconnect/boardPinMapping/boardProtocols wiring, example
projects (blink, serial, I2C BMP280/MPU6050/DS1307/SSD1306/weather, 7-seg,
RGB, button, switch, stepper, cross-board interconnect).
- Raspberry Pi 4/5 board elements + thumbnails.
Pro board gating (generic OSS->Pro seam; entitlement logic lives in the overlay):
- lib/proBoardGate.ts: isProBoardKind (STM32 + every QEMU Raspberry Pi),
installBoardGateImpl/boardGateDecision, triggerProUpgradePrompt.
- PRO badge on those boards in the component picker; gate at the picker add +
the run backstop (startBoard).
- backend/app/services/board_access.py: server-side enforcement seam for the
simulation WebSocket; STM32/Pi unavailable -> Pro-framed message.
- desktop: generic QemuDownloadPrompt + Stm32QemuPrompt (download-behind-license,
mirrors the ESP32 prompt).
- .gitignore: never ship libqemu-* binaries in the public image.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Sixth overflow-menu item, Pro-badged. Dispatches
velxio-pro-replay-record-toggle (projectId in detail) which the pro
overlay handles — plan check, board-type check, start/stop the
recorder. OSS build has no listener → silent no-op.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Fifth item in the overflow menu next to Sync to GitHub. Free for
all users (no PRO badge); dispatches velxio-pro-share-prompt with the
current project id so the overlay's ShareModal can render the direct
link + iframe snippet copy UI.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Dispatches velxio-pro-upgrade-prompt's sibling event
velxio-pro-github-sync-prompt with the current project id. The pro
overlay's GithubSyncModal listens and runs the four-state link/sync
flow (no-pro / not-connected / not-linked / linked) inline without
leaving the editor.
Pure OSS builds have no listener so the click is a silent no-op —
those users can't have linked repos anyway.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Replace the hard /pricing redirect on 402 with a window-dispatched
'velxio-pro-upgrade-prompt' event so private overlays can surface an
in-editor upgrade modal instead of bouncing the user out of context.
Move BOM, Schematic image and firmware upload buttons into a "..." More
menu next to the existing Export ZIP icon, freeing two button slots in
the inline toolbar. Mark the two premium items with a small "PRO" pill
so free-plan users know they're gated before they click — Notion- /
Linear-style discoverability cue.
Also wire Import + Export ZIP to fall back into that same menu once the
toolbar container drops below 320 / 280 px (container queries on the
editor pane width). Mobile / narrow-split layouts keep full feature
parity through the dropdown instead of overflowing into a horizontally
scrolling row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Front-end half of the schematic image export. New camera-icon button in
the editor toolbar between BOM and Upload-Firmware. Handler:
1. POSTs to /api/pro/projects/{id}/screenshot.png (server renders the
canvas with headless chromium, returns a PNG).
2. 402 → /pricing?from=screenshot_export
3. 401 → /login with redirect-back
4. 422 → friendly "add at least one component" toast
5. 200 → blob download with Content-Disposition filename
6. The "rendering..." toast surfaces during the 5-10 s of headless
chromium time so users know to wait, not click again.
i18n key editor.toolbar.exportScreenshot added in en/es/pt-br/zh-cn.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Phase 3 D3.1 — front-end half of the BOM export. The toolbar gains a
new spreadsheet-icon button next to the existing project-export button.
On click:
1. POST is NOT used — the backend endpoint is GET-based and streams a
CSV. We just open the URL.
2. 402 (Pro-required) routes the user to /pricing?from=bom_export
so the page can show the right upgrade narrative.
3. 401 routes to /login with redirect-back.
4. 200 triggers a Blob download with Content-Disposition filename.
i18n key editor.toolbar.exportBom added in en/es/pt-br/zh-cn — the
" — Pro" suffix on the tooltip hints at the gating without forcing the
user to discover it only on click.
The button is shown to everyone, not hidden by plan. Free/Maker users
clicking it gets the 402 route to /pricing, which is intentional — that
is the upgrade-discovery funnel we want, not a silent locked icon.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
#208 — stale binary executes after compile error
EditorToolbar.handleCompile: on failed compile, clear the active
board's compiledProgram so a subsequent Run can't silently execute
the previous successful build (which doesn't match the editor any
more). The Run gate already short-circuits on !compiledProgram and
forces a fresh compile.
#209 — compile terminal kept stale messages across runs
EditorToolbar.handleCompile: setCompileLogs([]) at the top of the
handler. Previously logs from the prior compile lingered, making it
hard to tell new errors / warnings apart from old ones.
#210 — desktop File > New Project did nothing
desktop/menu.ts: the menu action used to dispatch a CustomEvent
nobody listened to. Replaced with a real `newProject()` function
that stops the running simulation, removes every board (also drops
the bridges + wires touching them), clears components / wires,
loads the default Blink sketch into the editor, clears project
metadata, and wipes the compile output. Confirms first if there's
unsaved work on the canvas.
#211 — deleting the only board made every other component
unresponsive (wires still worked)
SimulatorCanvas.tsx::interactionRunning: the old expression
treated boards.length === 0 as "boardless electrical mode is
running" — which suppressed the property dialog on click and made
non-sensor components look frozen. Fixed by also requiring
useElectricalStore.submittedNetlist !== '' before flipping to the
boardless-running branch. SPICE has to have actually solved at
least once for the mode to engage.
#212 — ESP32 Support 404 with no actionable message
desktop/Esp32QemuPrompt.tsx: catch the raw "download HTTP 404" /
"not found" upstream error and reword it to "ESP32 support is not
yet available for your platform. The Velxio team is preparing
this build - try again in a few days, or use Arduino/RP2040
boards in the meantime." The real fix is server-side (the velxio
team needs to publish a qemu-xtensa.tar.gz for the user's
platform into the asset bucket and update esp32-qemu/latest.json).
Tracked in project/desktop-agent-v040/ follow-ups.
All five fixes verified with `tsc --noEmit` clean and the existing
25-test vitest suite green.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
When the auto-compile path in handleRun() finishes without producing a
compiledProgram, the previous code dropped the failure on the floor with
only a `console.warn` — the user clicked Run, nothing happened, and they
had no idea why. The accompanying comment also promised "always start
even if compiledProgram is empty" but the code did the opposite.
This commit replaces the dead comment + silent warn with a top-level
error toast + addLog entry, with a different copy for MicroPython mode
(suggests "click Load MicroPython to retry") vs Arduino C++ mode
(directs the user to the output console for the underlying error).
handleCompile already writes the actual cause to the compile-output
console via addLog — this fix just makes sure the user knows their
click failed and where to look.
The BoardKind type and the QEMU backend already supported
raspberry-pi-4 (Cortex-A72) and raspberry-pi-5 (Cortex-A76) by reusing
the Pi 3 arm64 image set, but the frontend had no way to actually
select either: the board picker, the canvas renderer, the serial
monitor, the oscilloscope channel list, and the editor toolbar all
hard-coded "raspberry-pi-3" as the only Pi entry. ComponentRegistry
even registered Pi 4 / Pi 5 metadata pointing at the velxio-raspberry-pi-3
custom-element tag — a placeholder that meant both boards rendered as
a Pi 3 in the picker thumbnail and on the canvas.
Add dedicated boards top-to-bottom:
* `RaspberryPi4Element.ts` / `RaspberryPi5Element.ts` — Velxio-style
schematic SVG (authored from scratch, not traced). Pi 4 is the
green PCB with BCM2711 SoC, 4× USB-A, USB-C power, dual µHDMI;
Pi 5 is the darker green PCB with BCM2712 + RP1 southbridge,
2.5 GbE, USB-C 5V/5A, PCIe FFC connector, dedicated power
button. Both carry a small "velxio" mark in the corner.
* `pi40PinHeader.ts` — shared `buildPi40PinHeader()` helper that
returns the 40-pin BCM layout. Every Pi from the 1B+ onwards
uses the same physical pin positions and same BCM GPIO
assignment, so Pi 3 / Pi 4 / Pi 5 elements all consume this
helper and example wires drawn against one model transfer to
the others without re-routing.
* React wrappers `RaspberryPi4.tsx` / `RaspberryPi5.tsx` render the
custom elements at absolute positions (mirrors how
RaspberryPi3.tsx handles the Pi 3 illustration).
* Wire-up across the editor surface:
- BoardOnCanvas: BOARD_SIZE entry + switch case.
- BoardPickerModal: description, icon, kinds list.
- ComponentPickerModal: thumbnails now instantiate the dedicated
custom element (was velxio-raspberry-pi-3 fallback).
- SerialMonitor / EditorToolbar: pill labels, icons, colours.
- Oscilloscope: GPIO channel list (28 BCM pins).
- SimulatorCanvas: remote-boards filter for run/stop sync.
- SPICE boardPinGroups: same 5V / 3V3 / GND as Pi 3.
- boardPinToNumber: accepts physical pin numbers ("1"-"40"),
BCM names ("GPIO14") and power labels for any Pi 3/4/5 id.
- ComponentRegistry: dedicated tagNames + per-board thumbnails
(green for Pi 4, darker green for Pi 5).
* EditorToolbar's Pi 3 special cases (Linux/Python compile path,
Run/Stop routing) now use `isPiBoardKind()` so Pi 4 and Pi 5
inherit the same behaviour automatically, and any future Pi
family member (Zero / 1 / 2) lands in the right code paths the
moment its backend boots.
QEMU backend was already wired (qemu_manager.py:71/82 + manifest entry
'raspberry-pi-3-virt' shared across arm64 Pis), so this commit makes
both boards selectable end-to-end without any backend follow-up.
Velxio had two parallel import paths that confused users (reported on
Discord by AgUn / dmontero):
* Toolbar "Import a project from a .zip file" → Wokwi .zip only
* File-explorer "Open .vlx file" → Velxio .vlx only
If you exported a Velxio project as .vlx and tried to bring it back via
the toolbar Import button, you bounced off "wrong format" with no hint
that the .vlx loader was hiding behind the file-explorer save-bar.
Fix: introduce `utils/importProject.ts` as the single dispatcher. It
sniffs the extension and routes:
*.vlx → importVlxFile (writes directly to stores)
*.zip → importFromWokwiZip (returns a payload the caller applies,
so the toolbar can still trigger the
install-libraries modal afterwards)
Both UI entry points now go through the dispatcher with the same
`accept=".vlx,.zip,application/json,application/zip"` filter:
* Toolbar "Import project (.vlx Velxio or .zip Wokwi)"
* File-explorer "Open project (.vlx Velxio or .zip Wokwi)"
The toolbar tooltip is i18n-driven — updated EN + 8 other locales
(es, fr, de, it, pt-br, ja, ru, zh-cn) so every user sees the same
clarification.
Wokwi compatibility kept intact — the .zip path still resolves to
`importFromWokwiZip` and the same library-install modal pops if the
imported project lists libraries we don't have locally.
Adds a third format to /api/compile-rom: `c` (C source compiled by SDCC
to Z80 bytes). Same chip-program flow as 8080/Z80 asm — write C in a
project file, click Compile, click Run.
Backend:
- backend/app/services/c_compile.py — async SDCC wrapper. Locates the
sdcc binary on PATH (or via SDCC env var, or common Windows install
paths) and shells out with target=mz80 + --code-loc 0x100 --data-loc
0x8000. Parses the resulting Intel HEX into raw ROM bytes. Pure 8080
is rejected with a clear error (SDCC has no 8080 backend; Z80 ROMs
also run on the i8080-cpu chip if you avoid Z80-only ops).
- rom_compile.py: compile_rom is now async; the new c branch delegates
to c_compile. compile_rom_endpoint awaits it.
Frontend:
- romCompileService: RomFormat gains 'c'; formatForFile maps .c/.cpp to
'c'. isChipProgramFile intentionally still excludes .c — disambiguation
happens at the EditorToolbar level.
- EditorToolbar: the chip-program path also fires when a custom-chip
has programFile === activeFile.name (regardless of extension). That
lets .c files route to /api/compile-rom (SDCC) when bound to a CPU
chip, while .c files NOT bound to any chip continue to route to
arduino-cli as before.
Docker:
- Dockerfile.standalone adds `sdcc` to the apt-get install list, so the
prod image ships with SDCC out of the box.
Example:
- /examples/z80-led-chaser-c — z80-cpu chip + chaser.c (a Larson
scanner written in C with __at() MMIO definitions). Compiles cleanly
with SDCC's --code-loc 0x100 default crt0.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Adds a new way to use the retro CPU chips: write your program in a
project file (.s / .asm / .hex / .bin), click Compile, click Run, and
the same chip emulates whatever you wrote. Same chip + different ROMs =
mini PC, calculator, LED demo, Kill-the-Bit game, etc.
SDK:
- velxio-chip.h gets two new host imports:
uint32_t vx_rom_size(void);
void vx_rom_read(uint32_t off, uint8_t* dst, uint32_t len);
CPU-emulator chips call these in chip_setup to pull their program out
of the host's romBytes property.
Frontend runtime:
- ChipRuntime accepts opts.romBytes (Uint8Array) and exposes the new
imports, copying bytes into chip memory on vx_rom_read.
- CustomChipPart pulls component.properties.romBytes (base64) and passes
it through.
- Component registry declares three new custom-chip properties:
romBytes (base64), programFile (matching project filename), and
programTarget (cpu name).
New programmable bundled chip:
- frontend/src/components/customChips/examples/intel/i8080-cpu.{c,chip.json}
Same clean-room 8080 emulator as i8080-repl/i8080-counter, but ROM is
loaded externally via vx_rom_*. Has 8 LEDs, 8 buttons, UART, 16 KB RAM,
32 KB of external ROM.
Backend:
- New /api/compile-rom endpoint and rom_compile service that turns
chip-program source into ROM bytes. 8080 ASM is assembled by the
in-tree two-pass assembler (moved to backend/app/services/asm8080.py).
Intel HEX records are parsed; raw .bin is passed through. Future targets
(z80, 8086, 4004) are scaffolded but not wired yet.
EditorToolbar:
- Compile button detects when the active file is .s/.asm/.hex/.bin and
routes to compile-rom instead of arduino-cli. The compiled bytes are
injected into every custom-chip on the canvas whose programFile property
matches the active filename (or is empty).
Example:
- /examples/i8080-killbits loads Dean McDaniel's 1975 Kill-the-Bit on
the programmable i8080-cpu chip. killbits.s is shipped as a project
file alongside sketch.ino; the user clicks Compile then Run and the
LED walks across 8 outputs, buttons kill it.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Adds a new BoardOptionsModal accessible from the EditorToolbar that exposes
per-board options (currently used for board-specific compile flags). Wires
the modal through:
- types/boardOptions.ts new BoardOptions shape
- types/board.ts BoardInstance gains `boardOptions` + `spiffsFiles`
- store/useSimulatorStore.ts boardOptions persisted in loadProjectState
- components/editor/EditorToolbar.tsx button to open the modal
- components/simulator/BoardOptionsModal.{tsx,css} the modal itself
- components/simulator/SimulatorCanvas.tsx passes the options through
- utils/projectPayload.ts board options serialised in saved projects
- pages/ProjectByIdPage.tsx re-includes the by-id loader needed for
project URLs that reference boards with
their persisted options.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Two related correctness fixes that make the simulator's realism
match what users actually see.
1. circuitVerifier was running pre-flight against the IDLE circuit
(every pin LOW). A Blink sketch is going to write pin 13 HIGH
eventually — at which point a missing series resistor produces a
~500 mA spike through the diode. But because pre-flight ran with
pin 13 LOW the led-overcurrent rule never fired, and the user
sailed through Run only to see the LED stay mysteriously dark on
the canvas.
The verifier now forces every digital pin connected to a load to
HIGH = vcc, the worst case any well-defined sketch will eventually
impose. The existing rules (led-overcurrent, resistor-overpower,
short-circuit) now fire correctly and the existing
CircuitVerificationModal blocks Run until the user adds a proper
current limiter or chooses Run Anyway.
Pins that are inputs-only (a pull-up + button) get over-driven
here too, but the rules tolerate that — a pull-up at 5 V draws
~0.5 mA, well below all thresholds. A circuit that would actually
fault under HIGH is flagged.
2. LED simulator was crashing visually on non-finite ngspice branch
currents. A degenerate diode (no series R) makes ngspice return
NaN, which fell through 'raw !== undefined && current > 1e-6' as
false and never triggered the digital fallback. Now we check
Number.isFinite(raw) before trusting it — non-finite returns
route to the digital fallback so the LED at least lights visually
when its driver pin is HIGH (the user still sees the verifier
warning that the real-world circuit is wrong, but Run Anyway is
not a black screen).
- Implemented `i2c-esp32-real-firmware.test.ts` to test ESP32 I2C communication via backend and WebSocket.
- Created `load-example-transitions.test.ts` to ensure proper loading of examples between board-less and board-based contexts.
- Added `CircuitVerificationModal.tsx` to display circuit verification results before running simulations.
- Developed `circuitVerifier.ts` to perform pre-flight checks for circuit safety, identifying potential issues like short circuits and component overloads.
- Introduced minimal ESP32 I2C master sketch `esp32_i2c_writer.ino` for testing I2C transactions.
- Implement HD44780Decoder for decoding I2C commands to HD44780-compatible LCDs.
- Add bmp280_bridge_reader.ino to read BMP280 chip_id and status registers via I2C.
- Create i2c_scanner_multi.ino to scan I2C addresses and report responding devices.
- Introduce lcd_i2c_hello.ino to demonstrate basic LCD functionality with I2C.
- Implement pcf8574_bidirectional.ino to test bidirectional communication with PCF8574.
- Add pico_i2c_master_reader.ino for reading BMP280 from a Raspberry Pi Pico.
- Create rtc_lcd_clock.ino to display time from a DS1307 RTC on an I2C LCD.
A user reported on Discord: "the Velxio Console doesn't update anything,
it just waits until the very end and displays everything in one go".
True for the async compile path — /compile/status only carried `state`
and the final `result`, so the editor's CompilationConsole stayed empty
during the 5-7 minute cold ESP-IDF builds and dumped 1500 lines at once
when the build finished.
This wires live build output through the whole stack.
Backend (espidf_compiler.py)
- New _run_with_streaming() helper. When a progress_callback is provided
it spawns the subprocess via Popen + stdout/stderr drain threads and
invokes the callback line-by-line. When None it falls back to the
existing subprocess.run(capture_output=True) one-shot path so the
unit-test code that doesn't care about live output is unaffected.
- compile() and _compile_in_dir() take an optional ProgressCallback.
- _run_cmake / _run_ninja closures now go through _run_with_streaming
with that callback. cmake configure (~2-5 s) + ninja (~5-300+ s) both
stream now; the ninja output is the one users actually want to watch.
Backend (compile.py)
- _compile_job seeds COMPILE_JOBS[id]['stdout_buffer'] = '' and defines
on_progress_line(line) which appends to it. Buffer capped at 256 KB
(tail kept) so a runaway build can't OOM the FastAPI process.
- The buffer is preserved on both the success and the error path so
late polls still see the log even after state transitions to
done/error.
- /compile/status now returns the buffer as a `stdout` field.
CompileStatusResponse gains the field with default '' so old clients
that don't read it still work.
Frontend (compilation.ts)
- compileCode() takes a 4th argument: optional CompileProgress
callback fired every poll while state ∈ {pending, running}. Carries
the cumulative stdout (caller computes deltas) plus elapsed seconds.
- Surfaces the new `stdout` field of /compile/status and forwards it
to the callback. Errors thrown from the callback are swallowed —
a faulty UI hook must never break the polling loop.
Frontend (EditorToolbar.tsx)
- Both compileCode() call sites (Run and Compile-All) now pass an
onProgress callback. It tracks `lastStreamedLen` per-compile, splits
each new delta on newlines, and appends them as `info`-typed
CompilationLog entries via setCompileLogs. The Compile-All flow
prefixes each line with the board label so multi-board builds stay
readable.
- After the build settles, the existing parseCompileResult call still
runs and appends the structured analysis on top of the live stream
— that's where FAILED-block detection + the `error`-typed entries
that drive the auto-switch-to-errors filter live.
Net effect on the user complaint: cold ESP-IDF builds now show the
ninja [N/1483] progress lines streaming into the console as they
happen, instead of staring at an empty panel for 5-7 minutes.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The top toolbar of the editor is now fully localised — compile / run /
stop / reset, the compile-all / run-all variants when multiple boards
are open, the language-mode select, libraries / import / export /
upload-firmware actions, and the missing-library hint banner.
Strings live under editor.toolbar.* in src/i18n/locales/<locale>/common.json.
Hand-translated for all 8 non-English locales. Brand and product
names (Arduino, MicroPython, Ctrl+B, .hex / .bin / .elf / .ihex,
GitHub Sponsors) preserved as-is.
Editor strings still pending: file explorer, file tabs, simulator
canvas, component picker, library manager modal, save / share /
project modals.
Changes that ship to OSS — all benign for self-hosters, but most are
extension points the velxio-prod overlay (and any private fork) needs to
plug an in-editor AI chat into the page.
Editor:
- 3-way view-mode toggle (code / both / circuit) in the unified toolbar.
Lets users hide a pane to give a right-docked sidebar (e.g. the AI
chat overlay) more breathing room. Persisted in useEditorStore.
- Default file explorer narrower (210 → 165 px); min 110.
- Removed the redundant `tb-board-pill` (icon + "Editing: X" tooltip);
the BoardSelector dropdown elsewhere already shows the active board.
- Inlined Import/Export/Upload-firmware buttons; the 3-dot overflow
menu gave up too much discoverability. Removed dead overflow state.
Simulator:
- Fix: global Delete/Backspace handler in SimulatorCanvas no longer
fires when the event target is an INPUT/TEXTAREA/SELECT/contentEditable
— affected any in-page text field, not just the chat overlay.
Overlay extensibility:
- New `data-velxio-slot="agent-chat"` at the bottom of EditorPage so
pro overlays can portal a chat panel into the editor without
forking the page.
- vite.config.ts: preserveSymlinks=true when VITE_PRO_BUILD is set.
Lets local-dev junctions (overlay tree → frontend/src/pro) resolve
bare imports back to the OSS node_modules without resolving symlinks.
Deps:
- Added react-markdown + remark-gfm (rendered chat output) and
@google/genai + zod (overlay agent loop). Tree-shaken from the OSS
bundle when no pro code imports them.
gitignore:
- Ignore backend/app/pro/ and frontend/src/pro/ junctions used by
developers running a private overlay against the OSS dev server.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Three small, backwards-compatible hooks let anyone with private features
(velxio.dev's analytics, custom integrations, paid tiers, …) layer them
on top of the open-source build without forking files.
Backend (app/main.py):
- After standard router registration, try-import an optional `app.pro`
module exposing `register_pro(app)`. ImportError is silently swallowed
(the OSS image doesn't ship `app.pro`, so this is a no-op there).
Frontend:
- EditorToolbar: new optional `rightSlot` prop renders extra elements
after the built-in right-group buttons (mirrors the existing
`centerSlot` pattern).
- main.tsx: dynamic `import('@pro/index')` gated by VITE_PRO_BUILD env.
When unset (OSS build), the branch is dead-code-eliminated and no pro
chunk is emitted.
- vite.config.ts: `@pro` alias resolves to `src/__pro_stub__/` by default.
Private builds set `VITE_PRO_BUILD=true` and `PRO_OVERLAY_PATH=<path>`
to point at their real overlay tree.
- src/__pro_stub__/index.ts: 1-line no-op `mountPro` so TypeScript and
Vite resolvers stay happy in OSS builds.
Verified: `npm run build:docker` succeeds; `npm test` passes 1161/1162;
the OSS bundle (43 MB) contains zero references to `__pro_stub__`,
`@pro`, or `pro/index` (verified via `grep dist/`).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
First open-source end-to-end emulation of the AI-Thinker ESP32-CAM
in QEMU, paired with a browser webcam → firmware bridge so users can
develop camera sketches without hardware. Status: esp_camera_init()
returns ESP_OK; OV2640 chip-id verifies (PID/VER/MIDH/MIDL exactly
match the datasheet); GPIO 25 VSYNC NEGEDGE interrupt enabled by
the upstream driver. Final piece (cam_task accepting frames) is in
progress — descriptor walker fix landed in this commit.
Backend (Python/FastAPI):
- simulation.py: camera_attach/frame/detach WS handlers
- esp32_worker.py: ctypes binding to velxio_push_camera_frame +
feature-detection fallback for older DLLs
- esp32_lib_manager.py: forward camera commands to the worker stdin
- esp-idf-template/main/CMakeLists.txt: esp32-camera headers added
via add_prebuilt_library + REQUIRES driver (resolves i2c_master_*
symbols). LED_BUILTIN=2 fallback for sketches that hardcode it.
Frontend (React/TS):
- EditorToolbar.tsx: ESP32-CAM (and the rest of the ESP32 family)
added to isQemuBoard list — Run button now starts the QEMU bridge
for these boards instead of falling through to the AVR path
- useWebcamFrames.ts: getUserMedia → OffscreenCanvas →
toBlob('image/jpeg') → base64 → WS at ~10 fps
- CameraToggle.tsx: header button with status colors + frame counter
- SimulatorCanvas.tsx: render CameraToggle for esp32-cam boards
- Esp32Bridge.ts: sendCameraAttach/Frame/Detach + chunked btoa
- useSimulatorStore.ts: diagnostic log on compileBoardProgram
- components-metadata.json: regen including esp32-cam component
Submodule pointer:
- wokwi-libs/qemu-lcgamboa → ff8eee0 (camera devices commit on
davidmonterocrespo24/qemu-lcgamboa branch picsimlab-esp32)
Investigation + tests in test/test-esp32-cam/:
- 13 autosearch markdown docs (overview, SOTA, OV2640 spec, DVP/I2S
spec, build blueprint, blockers resolved, descriptor walker fix)
- 5 sketches (camera_init, sccb_probe, dma_smoke, frame_roundtrip,
webcam_demo) + 8 live + WS regression tests
- README with the user-facing flow
.gitignore:
- libqemu-*.dll.{pre-camera,new,bak} (rollback points, regenerated)
- wokwi-libs/esp32-camera/ (clone consumed by arduino-esp32 path,
not part of this repo)
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
- Introduced SVG layout dimensions for Phase 1 (B/W mono) and Phase 2 (colour) ePaper panels, detailing active areas, bezels, and pin layouts.
- Developed a phased emulation plan outlining the architecture and deliverables for different panel types, including SSD168x and UC81xx.
- Created a canonical "Hello, World!" sketch for the 1.54" ePaper panel, ensuring compatibility across ESP32, Raspberry Pi Pico, and Arduino Uno.
- Implemented a pure Python SSD168x decoder to validate SPI command sets and framebuffers against specifications.
- Added tests for compiling the hello-world sketch across supported boards and for the SSD168x protocol to ensure correct framebuffer behavior.
Track per-user, per-project, and per-board usage to inform pricing tier
decisions. Adds an admin dashboard with KPIs (DAU/WAU/MAU, totals,
success rate), time-series charts for compiles/runs, board family +
FQBN breakdowns, "board diversity" pie chart (key freemium signal),
top users/projects, and per-country breakdown via Cloudflare's
CF-IPCountry header. Admin can now also view private projects.
Backend:
- New UsageEvent table (append-only event log with user_id, project_id,
event_type, board_fqbn/family, country, error_kind, duration_ms)
- Aggregate counters on User (total_compiles/runs/errors, last_active,
signup_country, last_country) and Project (compile/run/update counts,
last_compiled/run timestamps) kept in sync by MetricsService for O(1)
dashboard reads
- 10 admin endpoints under /api/admin/metrics/{overview, timeseries,
boards, board-diversity, top-users, top-projects, countries,
users/{id}, projects/{id}}
- POST /api/metrics/run for client-side run telemetry
- Country detection via cf-ipcountry header (no DB / no API calls)
- Auto-migrations in lifespan for legacy DBs
Frontend:
- recharts-powered Dashboard tab with KPI cards and 4 charts
- New Boards tab with per-family + per-FQBN breakdown
- Country column with flag emoji on Users tab
- Top countries card on Dashboard
- compileCode now forwards project_id; Run button reports via WS
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
- Modified the index file to reflect the new naming convention for Velxio components.
- Changed JSX declarations to use 'velxio-' prefix for various components.
- Updated component overrides to replace 'wokwi-' with 'velxio-' for logic gates and other components.
- Adjusted SVG generation script to use 'velxio-' prefix for BMP280 and Raspberry Pi components.
- Marked submodules as dirty in QEMU and RP2040 libraries.
- Added .prettierignore and .prettierrc.json for consistent code formatting.
- Introduced InstrumentComponent with support for Voltmeter and Ammeter, including pin information handling.
- Decoupled electrical simulation from the simulator store, ensuring SPICE is always active for accurate circuit analysis.
- Removed feature flag for electrical simulation, simplifying the state management.
- Preloaded SPICE engine at app start to eliminate latency during the first solve.
- Added comprehensive tests for MOSFET PWM LED behavior and NPN transistor switch functionality, ensuring correct current flow and response to pin states.
- Implemented diagnostics for floating input nodes in RC low-pass filter circuits, addressing singular matrix issues in SPICE simulations.
- Introduced active semiconductor metadata registry for better component management and simulation fidelity.
- Updated Vite configuration to force re-bundling of local wokwi-elements after component additions.
David Montero