Convert 7 outstanding it.todo markers into actual passing tests now
that the chips and bus infrastructure can support them:
- 4004 LDM: ACC observed via SRC + WMP X2 bus drive
- 4004 FIM: register pair observed via SRC X2/X3 nibble drives
- 8080 hand-built loop: LXI/MVI/INR/DCR/JNZ decrements counter
- Z80 IM 2: vector table at I:00 → ISR via INT̅ low
- 8086 1 MB wrap: DS=0xFFFF + offset 0x11 lands at physical 0x00001
- 8086 ALE pulse: counts ALE rising edges per bus cycle
- 8086 AD release: external drive sticks during T2 (chip released)
- 8086 hello-world: 5 MOV BYTE [imm], imm writes to memory-mapped
"UART" at DS:0x9000; bus capture + RAM peek verify "Hello"
Plus: remove redundant 8080 CPUDIAG and Z80 ZEXDOC todos — the
actual end-to-end runs already pass in dedicated cpudiag.test.js
and zexdoc.test.js files.
Suite is now 125/126 passing, 1 todo (Busicom 141-PF demo, awaiting
firmware ROM), 0 failed.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Replace the synthesised-RST-7 stub with a real INTA bus cycle. When
int_pending && IME, the chip emits status byte 0x23 on D during T1
(M1+INTA+WO̅) and samples the RST opcode external hardware drives on
the data bus during DBIN. Decodes RST n (0xC7..0xFF) and push+vectors.
Multi-byte INTA opcodes (CALL nnn) deferred.
Test rewrites the INT case to install a fixture INTA driver: snoop
SYNC + status byte, latch a pending flag, drive RST 5 (0xEF) on the
data bus during the next DBIN edge. Driver registers AFTER fake_rom
so its late drive overrides fake_rom's program-byte drive on the
same DBIN edge.
Tests: 8080 17→18 passing; test_intel 63→64 passing.
Adds master plan doc autosearch/18_complete_emulation_plan.md
covering phases A-G (this commit completes phase A).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
David Montero