The previous fix preserved display state on Stop so Resume could pick
up the multiplexed frame seamlessly — but that's Pause semantics, not
Stop. On a real Arduino, hitting the physical Stop is cutting power:
the next Run must boot from setup(), not continue at the saved PC.
User report on https://velxio.dev/example/uno-7segment :
> empieza a contar, le doy stop en el 6, le doy run y sigue desde 6
stopBoard now:
- calls sim.reset() (was sim.stop()) — CPU back to PC=0
- calls hardResetPinStates() (was the soft resetPinStates) — clears
cached states AND notifies listeners so 7-seg / NeoPixel / LCD
blank out instead of freezing on whatever was lit.
Reset and Stop are now the same cold-boot semantics; Reset still
additionally clears serial output + baud rate. The soft
resetPinStates() helper stays for internal SPICE-classification-only
paths that don't want listener fan-out.
Reporter feedback after 7aca3db: pressing Stop on the uno-7segment
example turned the 7-segment off, and pressing Start again left
random segments lit / no number at all. The previous fix made
resetPinStates() notify every listener with (pin, false) on both
Stop and Reset, which was right for Reset (full reboot) but wrong
for Stop:
- On Stop the AVR CPU is just paused. Internally it still has
PORTD=0xFF (or whatever the last drive was).
- resetPinStates blanked the pinStates cache + fan-out LOW
notifications. Display turns off, fine.
- On Start the CPU resumes from where it paused. avr8js's port
listener fires only for bits that CHANGED relative to its OWN
oldValue (which still holds the pre-stop value). If oldValue
matches the live register, no pinChange event fires for that
bit, and the display has no signal telling it to come back on.
Split the API into two methods:
resetPinStates() — soft cleanup, drops outputPins only. Used by
stopBoard. Cached pinStates and visual state
stay so the resume picks up where it left off.
hardResetPinStates() — full cleanup, drops outputPins + pinStates
and fan-outs (pin, false) to listeners.
Used by resetBoard (CPU starts at PC=0,
firmware re-drives every pin from setup()).
Updated the test helper clearAllPinManagerState to call
hardResetPinStates between tests so the same-state short-circuit in
triggerPinChange doesn't suppress fresh events.
All 32 vitest tests pass (AVRSimulator, interconnect-routing,
dual-arduino-software-serial, pin-position-rotation).
Two paired bugs that surfaced on the Reset button.
(1) 7-segment / NeoPixel / LCD freeze on last pattern after Reset.
resetPinStates() was wiping the pinStates cache + outputPins set
silently — no listener notifications fired, so visual components
that update on pinChange kept rendering whatever segments were
lit at the instant the user pressed Reset. Now we snapshot every
pin that was HIGH before clearing and fan out a synthetic
(pin, false) to each registered listener. Stateful displays
redraw cleanly to all-off; passive listeners (analog sensors,
debounce-only buttons) ignore the synthetic LOW and recover on
their next real write.
(2) Cross-board serial silently dies after pressing Reset. resetBoard
was unconditionally reassigning:
sim.onSerialData = (ch) => appendSerial(boardId, ch);
immediately after sim.reset(). The comment said "re-wire after
reset" but reset() does NOT clear that property — the new USART's
onByteTransmit chains through `this.onSerialData` which IS the
Interconnect wrapper. The reassignment destroyed that wrapper and
sibling-board UART forwarding (Uno TX → Nano RX) stopped working
until a full page reload. Same root pattern as the initSimulator
bug fixed in 5480052 — Interconnect's __icSerialHookInstalled
flag is on the live sim, so once the wrapper is blown away
nothing reinstalls it. Removed the reassignment and left a NOTE
so the next person doesn't reintroduce it.
Verified the AVRSimulator + dual-arduino-software-serial +
interconnect-routing test suites still pass (26 tests).
The SignalRouter path has been in prod through Phase 2.5 / Phase 3.3
deploys without regressions, so the temporary fallback shipped in
commit 77bf897 can come out. Closes#101.
Backend (esp32_worker.py + esp32_lib_manager.py):
- Stop emitting `ledc_update` from the 0x5000 LEDC callback and from
the polling thread. Only `ledc_duty` (channel + duty_pct) and the
GPIO matrix routing events ship now.
- Drop the channel→gpio reverse-lookup that fed the legacy event.
Frontend:
- Delete `PinManager.broadcastPwm` and `PinManager.pwmListenerPinCount`.
- Delete `makeLedcUpdateHandler` + its `channelGpioMemo`.
- Delete `Esp32Bridge.onLedcUpdate` field + the `case 'ledc_update':`
message handler + the `LedcUpdate` type.
- Strip `this.onLedcUpdate = null` from 14 test mocks.
- Rewrite the `does not call broadcastPwm` guard in
esp32-multi-servo-gpio-matrix.test.ts to assert the method itself
no longer exists on PinManager (stronger regression guard than the
spy version, and doesn't need vi).
- Remove the `PinManager.broadcastPwm fallback` describe block from
esp32-servo-pot.test.ts — every test in it exercised the deleted
fallback path.
Docs (ESP32_EMULATION.md):
- Replace `ledc_update` rows in the events / implementation tables
with the SignalRouter trio (`ledc_duty`, `gpio_routing`,
`gpio_routing_clear`).
- Update the visual flow diagram + the "why this matters" paragraph
to past-tense the broadcastPwm bug.
Tests: 1886 frontend tests pass (the previously-failing
board-kinds-coverage test that needed the new Pi Zero/1/2 kinds is
also green). Backend unit suite: 279 pass, the 11 espidf_real_paths
prereq failures are environment-dependent (need arduino-cli libs in
the local shell) and unrelated.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
End-to-end pipeline fixes uncovered while auditing the /examples gallery.
Each bug shipped past green unit + snapshot tests because none of those run
firmware + render LEDs. Added scripts/visual-led-test.mjs as a CDP-driven
visual harness that loads each example, runs the simulator, samples
`wokwi-led.brightness`, and asserts toggle / gradient / initial-off
invariants — exits non-zero on any regression.
Frontend simulator
- PinManager.updatePort: new optional ddrMask param. A pin is added to
`outputPins` only if the DDR bit is set, so the PORTx write that
enables INPUT_PULLUP (DDR=0, PORT=1) no longer falsely marks the pin
as MCU output. AVRSimulator now reads DDRB/C/D (0x24/0x27/0x2A on
Uno/Nano, 0x37 on ATtiny85, per-port table on Mega) and forwards it.
- AVRSimulator: pass DDR mask alongside every port-listener fire.
- BasicParts pushbutton{,-6mm}: seed pin HIGH in attachEvents so
`digitalRead()` returns HIGH while idle. avr8js doesn't auto-simulate
INPUT_PULLUP — without this the firmware reads LOW from boot and
thinks the button is permanently pressed (the "LED is always on,
pressing does nothing" UX bug).
- connectMcuEdgesToService: suppress synthetic digital edges on pins
with active PWM, AND subscribe to onPwmChange to re-tick the netlist
on duty changes. Fade-LED now produces a true gradient (6 distinct
brightness levels across a fade cycle) instead of a binary 0/full
toggle.
- CircuitSimulationService.handleMcuEdge: replace single-slot
pendingMcuEdge with a per-pin Map. Multiple pins toggling during the
same in-flight tick used to overwrite each other; now every pin's
most-recent edge replays after the tick. Fixes Traffic-Light RED→
YELLOW→GREEN sequencing.
- NetlistBuilder: new sanitizeSpiceId() helper replaces hyphens with
underscores in V-source names. ngspice's interactive `alter` command
treats `-` as an operator and silently no-ops on hyphenated source
names, so mid-simulation MCU pin transitions stopped propagating
after the first solve. MixedModeScheduler.onMcuPinChange and
CircuitSimulationService self-heal use the same sanitizer so names
stay consistent across emit/alter/lookup. Also added a regex-based
fallback in step 2 so any board pin matching `GND.\d+` canonicalises
to net "0" — ESP32-C3 dev kits expose up to 10 GND pins and the
per-board `groundPinNames` list missed several, leaving wires
floating instead of grounded.
- collectPinStates: emit V-sources only for pins in `outputPins`, not
every wired board pin. Leaves INPUT pins (analog sensors on A0,
pull-down dividers, etc.) free for the SPICE solver instead of being
shorted to 0 V by an ideal MCU V-source.
- start.ts: extended __spiceDebug to also expose outputPinsByBoard +
nodeVoltages + pinNetMapEntries for the visual harness.
- ESP32 / RP2040 / RISC-V / C3 simulators: pass `'mcu'` source flag to
triggerPinChange / setPinState so the new outputPins tracking fires
on those boards too (was AVR-only before).
- useSimulatorStore: stopBoard/resetBoard call pm.resetPinStates() so
outputPins clears between runs; Esp32Bridge.onPinChange passes the
`'mcu'` flag in all three places it's wired.
- types/board.ts: ATtiny85 FQBN `clock=internal16mhz` →
`clock=16pll` (ATTinyCore 1.5.2 renamed the option).
Backend
- esp-idf-template/main/CMakeLists.txt: skip the
`-DLED_BUILTIN=2` fallback for esp32c3 and esp32s3 targets. Both
variants already define LED_BUILTIN in pins_arduino.h via a
self-define macro (`#define LED_BUILTIN LED_BUILTIN` + `static const
uint8_t LED_BUILTIN = ...;`). Pre-defining the symbol from the
command line expanded the static-const declaration to
`static const uint8_t 2 = ...;` — a syntax error that broke every
ESP32-C3 / S3 build (`expected unqualified-id before numeric
constant`).
Examples
- examples.ts: bulk-fix 72 wire endpoints that referenced
`componentId: 'nano-rp2040'` / `'esp32-c3'` etc. (boards that don't
exist on the canvas). Replaced with `'arduino-uno'` (the canvas
board-id convention) and converted `D<n>` pin names to `GP<n>` for
Pico-style boards. Affects pico-blink, pico-i2c-scanner,
pico-i2c-rtc-read, pico-spi-loopback, c3-blink and others.
Tests
- scripts/visual-led-test.mjs: CDP-driven harness. Default suite covers
Blink (single-pin), Button (idle-OFF invariant — catches the
INPUT_PULLUP regression), Traffic-Light (multi-pin sequencing),
Fade-LED (PWM gradient — ≥3 distinct levels), RGB-LED (≥3 PWM pins
driven). Run via `npm --prefix frontend run test:visual` against a
Chrome on `:9222` + vite on `:5174` + backend on `:8001`.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
User-reported bug (project 5218f9e3, solar-tracker with 2× ESP32
servos): when LDR values change the servos visibly oscillate between
two positions instead of moving smoothly.
Root cause in useSimulatorStore.makeLedcUpdateHandler. When the
backend emits a ledc_update with gpio=-1 (the per-channel gpio_out_sel
map isn't populated yet on the very first duty change after attach),
the handler called PinManager.broadcastPwm(duty). broadcastPwm fans
the same duty out to ALL registered PWM consumers — for a project
with two servos both subscribed in the 0.01-0.20 duty range, each
broadcast made BOTH servos mirror whichever channel was last
written. Result: servoPan→91° and servoTilt→87° alternating writes
would visibly snap both servos to 87°, then 91°, then 87°…
Two-part fix:
1. PinManager grows `pwmListenerPinCount()` — number of distinct
pins with at least one PWM consumer registered.
2. makeLedcUpdateHandler now keeps a per-board memo of
{ledc_channel → last-known-good-gpio}. On a gpio=-1 update:
- if the channel has a remembered gpio, route there;
- else, only broadcast when there's at most ONE consumer
(single-LED / single-servo setups still work);
- otherwise drop the update — the backend's GPIO out_sel poll
repopulates the map within a few ms and the next ledc_update
arrives with a real gpio.
The drop is correct because the same LEDC channel keeps emitting
duty changes every Servo.write() call (~33 Hz at 30 ms loop delay),
so missing one transient gpio=-1 frame is invisible.
Tests: 1853 pass. The existing esp32-servo-pot tests already cover
the gpio>=0 happy path; the new memo path is exercised indirectly
through that handler.
Fixes the user-reported bug where two RPi Pico W boards wired GP0↔GP1
running SerialPassthrough don't communicate. Replaces the broken
broadcast-style cross-board logic in addBoard (only routed AVR↔Pi3B,
ignored wires entirely, no RP2040↔anything path) with a wire-aware
Interconnect singleton.
Architecture: digital pin transitions are the lowest-common-denominator
abstraction. Each simulator's hardware peripherals (UART/I2C/SPI) and
bit-banging libraries (SoftwareSerial, software I2C) decode the
transitions naturally — propagate the pin and the protocols come for
free. For cross-process boards (ESP32 backend QEMU, Pi3B QEMU) a
byte-level shortcut is additionally enabled on hardware-UART pin
pairs to handle high-baud links over WebSocket latency.
Implementation:
- New simulation/Interconnect.ts singleton subscribes to wire/board
changes via the Zustand store. Handlers per tier: browser-sim →
pinManager.onPinChange, ESP32 → Esp32Bridge.sendPinEvent, Pi3B →
bridge.sendPinEvent. Re-entrancy guard via per-(board,pin) Set.
- New utils/boardProtocols.ts classifies pins (uart-tx, i2c-sda, etc.)
per board kind, used as optimization hint for the byte shortcut.
- types/wire.ts: added signalType field, exports WireSignalType /
WireColorMap (fixes a pre-existing TS import error in wireColors).
- Deleted the bridgeMap/simulatorMap broadcast forEach blocks in
addBoard. Initial board + future boards register with Interconnect
via setInterconnectRuntime + store subscription.
- PinManager.resetPinStates() helper for test isolation.
Tests (16 new files, 96 tests, all passing):
- Per-pair × per-protocol matrix: dual-arduino-digital,
dual-pico-digital, arduino-pico-digital, triple-pico-digital-chain,
dual-arduino-hw-uart, dual-arduino-software-serial,
arduino-pico-mixed-uart, arduino-esp32-uart, dual-esp32-uart,
pi3-pico-uart, arduino-pico-i2c, arduino-arduino-spi,
interconnect-routing, dual-arduino-multi-protocol (UART+I2C+SPI+
digital + concurrent), dual-pico-multi-protocol (UART0+UART1 alt+
I2C0+I2C1+SPI0+digital + 3-Pico star topology)
- Updated dual-pico-serial-passthrough to assert correct behaviour
- Backend test/multi_board_esp32/test_dual_esp32_serial.py for two
real QEMU instances (skip-graceful when lcgamboa lib absent)
Verified: 1107/1107 tests pass, zero regressions, vite build OK.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
- Modified the index file to reflect the new naming convention for Velxio components.
- Changed JSX declarations to use 'velxio-' prefix for various components.
- Updated component overrides to replace 'wokwi-' with 'velxio-' for logic gates and other components.
- Adjusted SVG generation script to use 'velxio-' prefix for BMP280 and Raspberry Pi components.
- Marked submodules as dirty in QEMU and RP2040 libraries.
- Added .prettierignore and .prettierrc.json for consistent code formatting.
- Introduced InstrumentComponent with support for Voltmeter and Ammeter, including pin information handling.
- Introduced ArduinoMega component for rendering in the simulator.
- Updated SimulatorCanvas to handle Arduino Mega board type.
- Enhanced AVRSimulator to support ATmega2560 architecture, including PWM pin mapping and port management.
- Modified PinManager to accommodate Mega's non-linear pin mapping.
- Updated boardPinMapping utility to include Mega analog pins.
- Adjusted Wokwi import/export functionality to recognize and handle Arduino Mega.
- Updated useSimulatorStore to initialize AVRSimulator with the correct board variant.
- Added PWM duty cycle tracking and callback registration to PinManager.
- Introduced methods for handling analog voltage injection and callbacks.
- Updated updatePort method to notify digital pin listeners.
- Improved listener management with clearAllListeners method.
feat: Expand BasicParts with new components
- Registered new components: 6mm Pushbutton, Slide Switch, DIP Switch 8, LED Bar Graph, and 7-Segment Display.
- Implemented event handling for each component to interact with the AVR simulator.
feat: Introduce ComplexParts with advanced components
- Added RGB LED with PWM support for color mixing.
- Implemented Potentiometer and Slide Potentiometer for analog input.
- Created Photoresistor Sensor to simulate light levels.
- Developed Analog Joystick for two-axis control and button press.
- Added Servo motor simulation with pulse width modulation.
- Implemented Buzzer using Web Audio API for sound generation.
- Created LCD 1602 and 2004 simulations with command/data processing.
- Added SimulatorCanvas component for rendering the simulator interface.
- Integrated Wokwi components (Arduino, LED, Resistor, Pushbutton, Potentiometer) into the simulator.
- Created PinManager to handle pin state changes and notifications.
- Developed AVRSimulator class for emulating Arduino Uno functionality.
- Implemented hex file loading and compilation service.
- Added CSS styles for the simulator interface.
- Established Zustand stores for managing editor and simulator states.
- Created utility functions for parsing Intel HEX format.
- Set up Vite configuration for the frontend project.
- Added batch scripts for starting backend and frontend servers, and updating Wokwi libraries.
David Montero