A profile's extra_drive is the same file for everyone; an overlay may
need a disk built for THIS session (what the project declared). New
seam set_pi_extra_drive_resolver(fn) receives the client id, the board
and the start_pi payload and returns raw images, mounted read-only after
the profile's own. The WS route forwards msg_data and the bridge gained
startPayload so a client can declare it. Generic: no package manager,
no OS knowledge in the OSS tree.
- profile key extra_drive: optional read-only second virtio-blk so an
overlay can ship guest-side shim libraries (/dev/vdb)
- SENS <name> protocol op: canvas-fed named values (built-in sensors /
buttons) served from PiInstance.sensor_state, pushed by the frontend
via the new pi_sensor_state WS message
- DISP <b64> protocol op: guest display commands forwarded to the
frontend as 'display' events (built-in screens)
- RaspberryPi3Bridge: onDisplay / onGpioPwm callbacks + setSensorState
- SimulatorCanvas hands piFamily boards their Pi bridge in
attachBuiltins (was ESP32-only)
Move the CYW43439 (Pico W) WiFi emulation out of the open-source tree so it
can ship as a paid feature in a private overlay. OSS keeps a plain Pico W
(no WiFi); the overlay registers the cyw43 protocol + backend network stack
at runtime via generic seams.
Frontend:
- Add simulation/PioPeripheral.ts: a generic "PIO bus peripheral" seam
(feedWord / inDiscardableWriteData / resetFraming / hostWakeLevel /
onHostWake / onSimulationStart). No factory is installed in OSS, so
createPioPeripheral() returns null and a Pico W simulates as a plain Pico.
- RP2040Simulator: keep the fragile PIO-FIFO plumbing (it must re-run after
loadMicroPython swaps the chip) but drive it through PioPeripheral instead
of an inlined cyw43 import (attachCyw43 -> attachPioPeripheral, etc.).
- useSimulatorStore: generic attach/detach + setBoardWifiStatus; drop the
cyw43 bridge map.
- MicroPythonLoader: add registerFirmwareVariant() so an overlay can add the
RPI_PICO_W build; remove the OSS pico-w config + bundled .uf2.
- Delete simulation/cyw43/ (moved to the overlay).
Backend:
- core/hooks.py: add generic register_ws_sim_handler / dispatch_ws_sim_message
and register_gateway_proxy / dispatch_gateway_proxy seams.
- simulation.py: route start_picow / stop_picow / picow_packet_out through the
ws_sim_handler hook (the overlay handles + gates them).
- iot_gateway.py: resolve the Pico W gateway through the gateway_proxy hook.
- Delete services/picow_net/ + picow_net_bridge.py (moved to the overlay).
Tests: move the cyw43/picow suites to the overlay; update RP2040Simulator
mock stubs to attachPioPeripheral.
Add a working microSD card part backed by a FAT16 image, following the
Wokwi storage model: the project's own workspace files are auto-copied
onto the card (free), and an optional "SD Card" panel uploads extra
files (gated as a paid feature by the velxio.dev overlay; OSS default
allows it).
Frontend (in-browser AVR / RP2040):
- ProtocolParts.ts: rewrite the microsd-card part from a handshake stub
into a real SD-over-SPI device (reply-first Ncr timing, SDSC byte
addressing, single/multi-block read+write, CSD/CID, full CMD set).
- utils/fatImage.ts: dependency-free FAT16 super-floppy builder (8.3 + LFN).
- utils/sdCardFiles.ts: assemble the card image from workspace files plus
uploaded files; base64 helpers.
- components/simulator/SdCardPanel.tsx + ComponentPropertyDialog: upload UI.
- DynamicComponent + useSimulatorStore: build and inject the image on run.
- lib/proSdCardGate.ts: overlay-installable gate for the upload action.
- data/examples-storage-microsd.ts: Arduino Uno + ESP32 gallery examples.
Backend (ESP32 via QEMU):
- services/esp32_sd_slave.py: synchronous SD-over-SPI slave (Python port of
the browser part) with a sparse backing store, idle-state R1 tracking and
real CRC16 on data blocks when the host enables CRC (CMD59) -- both
required by ESP-IDF's sdspi driver.
- esp32_worker.py: route SPI bytes to the slave (returns MISO synchronously)
and feed write-only bulk transfers.
- esp32_lib_manager.py + routes/simulation.py: forward the FAT image
(sd_card.image_b64) from the start config into the worker.
Tested:
- frontend: protocol-parts, fat-image, sd-card-gate and microsd-real-firmware
(real Arduino SD.h on avr8js) -- 86 passing.
- backend: test_esp32_sd_slave (10) covering the ESP-IDF init sequence and
CRC16; validated end to end by running a real SD.h sketch in libqemu-xtensa
(mount, directory listing, read and write-readback).
STM32 emulation (open-core, runs via libqemu-arm in the backend worker):
- backend: stm32_lib_manager + stm32_worker (GPIO, USART, I2C/SPI device models
reusing the ESP32 slaves, live sensor updates), arduino_cli STM32 branch,
start_stm32 simulation route.
- frontend: Stm32Bridge + Stm32BluePill(/BlackPill) web components (Wokwi SVGs),
board kinds, Interconnect/boardPinMapping/boardProtocols wiring, example
projects (blink, serial, I2C BMP280/MPU6050/DS1307/SSD1306/weather, 7-seg,
RGB, button, switch, stepper, cross-board interconnect).
- Raspberry Pi 4/5 board elements + thumbnails.
Pro board gating (generic OSS->Pro seam; entitlement logic lives in the overlay):
- lib/proBoardGate.ts: isProBoardKind (STM32 + every QEMU Raspberry Pi),
installBoardGateImpl/boardGateDecision, triggerProUpgradePrompt.
- PRO badge on those boards in the component picker; gate at the picker add +
the run backstop (startBoard).
- backend/app/services/board_access.py: server-side enforcement seam for the
simulation WebSocket; STM32/Pi unavailable -> Pro-framed message.
- desktop: generic QemuDownloadPrompt + Stm32QemuPrompt (download-behind-license,
mirrors the ESP32 prompt).
- .gitignore: never ship libqemu-* binaries in the public image.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Adds the public extension points the velxio-prod overlay uses to bind
real canvas-side I2C/SPI/UART models (BME280, future MCP23017, etc.)
to a running Pi guest's protocol shims:
- qemu_manager: set_pi_slave_handler(fn) / get_pi_slave_handler() for
pi_attach_slave + pi_detach_slave WebSocket messages. OSS image
leaves the hook unset so the messages are silently dropped.
- simulation route: parses the two new WS message types and forwards
them to the registered handler when present.
- RaspberryPi3Bridge: attachSlave(spec) / detachSlave(spec) frontend
side of the protocol.
- piSlaveScanner: at simulation start walks components + wires,
identifies I2C/SPI/UART peers wired to Pi protocol pins (40-pin
header physical-pin numbering), and emits one attach per
bus/address pair (deduped across SDA+SCL wires).
- RaspberryPiWorkspace: invokes the scanner once the bridge is open,
with retries to ride out the WS-still-connecting race.
- integration test: pi3_bme280_attach.py boots the Pi, pre-attaches a
BME280 via the slave handler, runs a host-side proto loop, runs
guest python smbus2.read_byte_data(0x76, 0xD0) and asserts the
console reads back CHIP=0x60.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
- Implemented `i2c-esp32-real-firmware.test.ts` to test ESP32 I2C communication via backend and WebSocket.
- Created `load-example-transitions.test.ts` to ensure proper loading of examples between board-less and board-based contexts.
- Added `CircuitVerificationModal.tsx` to display circuit verification results before running simulations.
- Developed `circuitVerifier.ts` to perform pre-flight checks for circuit safety, identifying potential issues like short circuits and component overloads.
- Introduced minimal ESP32 I2C master sketch `esp32_i2c_writer.ino` for testing I2C transactions.
First open-source end-to-end emulation of the AI-Thinker ESP32-CAM
in QEMU, paired with a browser webcam → firmware bridge so users can
develop camera sketches without hardware. Status: esp_camera_init()
returns ESP_OK; OV2640 chip-id verifies (PID/VER/MIDH/MIDL exactly
match the datasheet); GPIO 25 VSYNC NEGEDGE interrupt enabled by
the upstream driver. Final piece (cam_task accepting frames) is in
progress — descriptor walker fix landed in this commit.
Backend (Python/FastAPI):
- simulation.py: camera_attach/frame/detach WS handlers
- esp32_worker.py: ctypes binding to velxio_push_camera_frame +
feature-detection fallback for older DLLs
- esp32_lib_manager.py: forward camera commands to the worker stdin
- esp-idf-template/main/CMakeLists.txt: esp32-camera headers added
via add_prebuilt_library + REQUIRES driver (resolves i2c_master_*
symbols). LED_BUILTIN=2 fallback for sketches that hardcode it.
Frontend (React/TS):
- EditorToolbar.tsx: ESP32-CAM (and the rest of the ESP32 family)
added to isQemuBoard list — Run button now starts the QEMU bridge
for these boards instead of falling through to the AVR path
- useWebcamFrames.ts: getUserMedia → OffscreenCanvas →
toBlob('image/jpeg') → base64 → WS at ~10 fps
- CameraToggle.tsx: header button with status colors + frame counter
- SimulatorCanvas.tsx: render CameraToggle for esp32-cam boards
- Esp32Bridge.ts: sendCameraAttach/Frame/Detach + chunked btoa
- useSimulatorStore.ts: diagnostic log on compileBoardProgram
- components-metadata.json: regen including esp32-cam component
Submodule pointer:
- wokwi-libs/qemu-lcgamboa → ff8eee0 (camera devices commit on
davidmonterocrespo24/qemu-lcgamboa branch picsimlab-esp32)
Investigation + tests in test/test-esp32-cam/:
- 13 autosearch markdown docs (overview, SOTA, OV2640 spec, DVP/I2S
spec, build blueprint, blockers resolved, descriptor walker fix)
- 5 sketches (camera_init, sccb_probe, dma_smoke, frame_roundtrip,
webcam_demo) + 8 live + WS regression tests
- README with the user-facing flow
.gitignore:
- libqemu-*.dll.{pre-camera,new,bak} (rollback points, regenerated)
- wokwi-libs/esp32-camera/ (clone consumed by arduino-esp32 path,
not part of this repo)
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
- Introduced SVG layout dimensions for Phase 1 (B/W mono) and Phase 2 (colour) ePaper panels, detailing active areas, bezels, and pin layouts.
- Developed a phased emulation plan outlining the architecture and deliverables for different panel types, including SSD168x and UC81xx.
- Created a canonical "Hello, World!" sketch for the 1.54" ePaper panel, ensuring compatibility across ESP32, Raspberry Pi Pico, and Arduino Uno.
- Implemented a pure Python SSD168x decoder to validate SPI command sets and framebuffers against specifications.
- Added tests for compiling the hello-world sketch across supported boards and for the SSD168x protocol to ensure correct framebuffer behavior.
- Implement `ammeter-waveform.test.ts` to validate AC readings from a sine wave source.
- Create `capacitor-charge-transient.test.ts` to test the charging response of an RC circuit driven by a microcontroller pin.
- Introduce `esp32-rectifier-integration.test.ts` for testing rectifier behavior using QEMU and ESP32.
- Add helper functions in `esp32RectifierE2E.ts` for the rectifier test harness.
- Develop `voltmeter-waveform.test.ts` to ensure correct AC and DC readings from a sine wave source.
- Implement unit tests for waveform statistics in `waveform-stats.test.ts` to validate RMS, mean, peak, and interpolation functions.
- Create `waveformStats.ts` to provide statistical functions for time-domain waveform analysis.
Replace arduino-cli with ESP-IDF 4.4.7 for ESP32 compilation — Arduino-compiled
firmware crashes in QEMU (9-28 reboots) while ESP-IDF boots cleanly (0 reboots).
The new espidf_compiler translates Arduino WiFi/WebServer sketches to native
ESP-IDF C code, compiles with cmake+ninja, and merges into 4MB flash images.
Key changes:
- ESP-IDF compiler: translates WiFi.begin/WebServer to esp_wifi/esp_http_server
- ESP-IDF project template with QEMU-optimized sdkconfig (DIO, 40MHz, no WDT)
- WiFi status parser for ESP-IDF serial logs (wifi_status, ble_status events)
- IoT Gateway HTTP reverse proxy for ESP32 web servers
- WiFi/BLE auto-detection from sketch content + visual status icons
- Static IP 192.168.4.15 matching slirp DHCP first-client range
- Docker: new espidf-builder stage with ESP-IDF 4.4.7 toolchain
- 157 tests covering WiFi/BLE for both ESP32 (Xtensa) and ESP32-C3 (RISC-V)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Added board-agnostic sensor registration methods in RP2040Simulator.
- Enhanced ComplexParts to handle LEDC PWM duty updates for ESP32.
- Updated ProtocolParts to check if the simulator handles sensor protocols natively, delegating to backend if applicable.
- Introduced pre-registration of sensors in useSimulatorStore for ESP32 to prevent race conditions.
- Added tests for ESP32 DHT22 sensor registration flow, ensuring proper delegation and fallback mechanisms.
- Created tests for ESP32 Servo and Potentiometer interactions, verifying PWM subscriptions and ADC handling.
- Updated components-metadata.json with new generated timestamp.
- Refactored Esp32C3Simulator.ts to remove unnecessary debug variables and logging, and added support for additional ROM functions.
- Modified useSimulatorStore.ts to clarify bridge usage for ESP32 boards.
- Updated submodules for QEMU and other libraries to indicate dirty state.
- Added test_esp32c3_emulation.py for end-to-end testing of ESP32-C3 emulation, including compilation, flash image merging, and GPIO event checking.
- Added detailed logging for GPIO changes, system events, and errors in simulation websocket.
- Improved ESP32 firmware handling by merging individual binaries into a single 4MB flash image.
- Updated ESP32 bridge to handle serial output and GPIO changes with appropriate logging.
- Introduced integration test for ESP32 emulation, covering compilation, WebSocket connection, and event handling.
- Enhanced examples to include ESP32 projects and updated the examples gallery to reflect new board types.
- Refactored simulator store to manage ESP32 bridge and simulator instances more effectively.
- Updated requirements to include esptool for ESP32 firmware management.
- Added ESP32 emulation plan and architecture documentation.
- Created `esp_qemu_manager.py` for managing ESP32 QEMU instances.
- Modified backend API routes to support ESP32 firmware loading and GPIO handling.
- Introduced `Esp32Bridge.ts` for frontend communication with ESP32 instances.
- Refactored simulator store to support multiple boards, including Raspberry Pi and Arduino.
- Created `RaspberryPi3Bridge.ts` for WebSocket communication between frontend and backend for Raspberry Pi.
- Updated QEMU manager to handle multiple serial ports for Raspberry Pi GPIO communication.
- Enhanced SimulatorCanvas to render multiple boards and manage wire routing between them.
- Implemented board picker modal for selecting and adding boards to the canvas.
- Updated editor to support multiple file groups per board.
- Added migration logic for loading old project formats into the new multi-board structure.
- Ensured backward compatibility with existing components and functionality.
- Introduced new BoardKind types for Raspberry Pi 3B and updated BoardInstance interface.
- Added BOARD_KIND_LABELS and BOARD_KIND_FQBN mappings for new board types.
- Implemented physical to BCM GPIO mapping for Raspberry Pi 3B in boardPinMapping utility.
- Updated BOARD_COMPONENT_IDS to include Raspberry Pi 3B.
- Enhanced isBoardComponent function to support new board type.
- Modified boardPinToNumber function to handle pin mapping for Raspberry Pi 3B.
- Created a new DocsPage component for project documentation with links to GitHub and Discord.
- Added Arduino sketch for serial communication test between Raspberry Pi and Arduino.
- Implemented avr_runner.js to emulate ATmega328P and bridge serial communication over TCP.
- Developed a Python test script to validate the serial integration between the emulated Raspberry Pi and Arduino.
David Montero Crespo