When a compile supplies a 'libraries' manifest, _resolve_library_components
merges a USER-installed library only if it's declared in that set. A sketch
therefore never picks up an unrelated library from the shared dir (another
user's install, or a same-named clash) — the manifest is the resolution scope.
- _resolve_library_components(allowed_libraries): gate user-lib merges on
manifest membership; match by folder name OR library.properties name=,
normalised (display name vs on-disk folder differ by separators/case).
Core/bundled libs are never gated. None = legacy scan-all (unchanged).
- Threaded through compile() -> _compile_in_dir.
- compile.py: CompileRequest.libraries; folded into the async dedup _job_key
so a different manifest doesn't dedup to a job built with another.
Opt-in: omitting 'libraries' preserves current behaviour exactly.
Regression: test/backend/unit/test_espidf_core_first.py::TestManifestScope
A board example proving digital and analog coexist in ONE circuit: the Arduino
drives two logic levels, a physical AND gate combines them, and the AND output
switches an NPN 2N2222 transistor that drives the "motor" LED. Verified live: it
compiles, the MCU drives the AND gate (5 V), the transistor conducts and the LED
lights — MCU -> logic gate -> transistor -> load works across the digital and
ngspice motors together.
Known limitation (sim-mixedmode step 2, pending): the ngspice side does not
re-solve on every MCU pin edge, so a fast (1 Hz) blink does not track in real
time — the analog output changes on a slower cadence. User-driven / slow changes
track fine. Snapshot updated for the new example.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The AND Gate Alarm needed BOTH inputs HIGH at once, but it used momentary
pushbuttons buffered through an Arduino — with one mouse you can only hold one
button at a time, so the AND never fired and the alarm could never be
demonstrated.
Rebuilt it as a board-less digital circuit: two SLIDE switches (they latch) feed
a real AND gate that drives the alarm LED. Slide both switches ON and they stay,
so the alarm arms. No MCU / compilation — it runs on the digital gate engine.
Verified live: the LED lights only on 11 (00/01/10 -> off, 11 -> on).
Snapshot updated: the new board-less and-gate-alarm netlist, plus the digital
bucket count label (38 -> 39) from the earlier ripple-counter example.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Adds the first board-less SEQUENTIAL gallery example (digital-ripple-counter-4bit):
four T flip-flops chained into a ripple counter, LEDs showing the binary count,
clocked by a slide switch. Impossible on the SPICE engine (no edge detection at
DC) - it runs on the digital gate engine.
Controller fix (found by testing the counter live): the controller rebuilt the
network on every change, which reset flip-flop state so a counter never counted.
Now the network is built once and KEPT ALIVE; a switch toggle applies
incrementally via setSwitch (preserving sequential state), and a rebuild happens
only on a structural change (components/wires). Correct for combinational AND
sequential circuits.
examples-digital.test.ts: flip-flop examples are digital-engine-only, so they are
exempt from the SPICE-mapping / has-a-gate / netlist checks (the "logic" check
now accepts a gate OR a flip-flop). digitalgate-engine-examples: a correctness
test clocks the real counter example and asserts it counts 1..15,0 in binary.
Verified live (?digitalgates default ON): the counter counts 0..6 on the canvas;
and the complex examples all work - comparator-4bit (A=B correct), decoder-3to8
(perfect one-hot x8), alu-slice-1bit (32 combos deterministic), multiplier-2x2
(3*3=9, 7 distinct products), adder-subtractor-4bit (5+3=8).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Flip-flops are edge-triggered and hold state, which the combinational settle
kernel cannot model alone. buildDigitalNetwork now gives each flip-flop explicit
state + rising-CLK-edge detection (reusing the LogicGateParts sample semantics):
sample the data nets on the edge, drive Q + Qbar. Because a flip-flop only
updates on the clock edge, a Q->D / Q->CLK feedback (counter / shift register)
does not oscillate the settle loop. isAllDigital now accepts a gate OR a
flip-flop, so pure sequential circuits qualify.
Test digitalgate-sequential (4): D (capture + hold), T (toggle), JK
(hold/set/reset/toggle), and a 2-bit ripple counter (FF0.Qbar clocks FF1)
counting 1,2,3,0,1 - impossible on the SPICE path (no edge detection at DC, no
SPICE mapper). The controller already routes all-digital circuits through
buildDigitalNetwork, so a board-less counter/shift-register example would run
live; authoring those gallery examples is the only follow-up. Full digitalgate
+ examples-digital + circuit-simulation-service suites green (127 tests).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
buildMixedNetwork evaluates the gate (digital) side of a MIXED circuit on the
settle kernel and exposes the boundary with the analog (ngspice) domain. Unlike
buildDigitalNetwork it does not bail on non-primitive components - those are the
analog side; their pins mark the nets they touch as boundary. Exposes
boundaryNets, readBoundary(net) (digital->analog: the gate-driven level to seed
an ngspice voltage source) and setBoundaryInput(net, level) (analog->digital:
ngspice's solved+thresholded level, which re-evaluates downstream gates).
Test digitalgate-mixed-boundary (4): the boundary nets are exactly the
digital/analog bridges; both directions track; a digital->analog->digital
coupler loop converges. No ngspice needed - the analog side is supplied by the
test. Wiring the handoff to the live ngspice netlist (0/Vcc sources + threshold
+ settle<->solve iteration) is the remaining step; it needs the running solver
(the node loader is broken by a pre-existing path bug) and a mixed example.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Phase 4 (brought forward before the mixed-mode boundary). digitalgate-sweep
proves the engine handles 38/38 gallery digital examples: every one builds,
resolves every LED, and never oscillates. Tightened isAllDigital to also require
at least one logic gate, so a degenerate analog {source, resistor, LED} circuit
stays on ngspice rather than being claimed by the digital path. Flipped
digitalGatesEnabled() default to ON (override with ?digitalgates=off).
Full frontend suite 2120 pass / 5 fail — the 5 are the same pre-existing
unrelated failures (ngspice node-path, attiny85 arduino-cli, component-to-spice
catalog); the default flip adds no new breakage and examples-digital +
circuit-simulation-service stay green.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Board-less digital circuits (logic gates + switches + LEDs) run today as ngspice
analog B-sources, which is fragile for deep logic: a 4-bit ripple adder re-solves
but never lights its result LEDs live. This adds an event-driven digital motor
that reuses the multichip-bus settle kernel, so the same engine that boots a Z80
over a chip bus evaluates a gate network exactly and instantly.
Phases 0-2 (project/digital-gate-engine/), all behind ?digitalgates=on (default
OFF — flag off is byte-for-byte the old behaviour):
- digitalGateEngine.ts: buildDigitalNetwork(components, wires) does union-find
over the wires (merging pass-through resistors), identifies the rail/gnd from
the signal-generator, registers drivers (rail STRONG-1, gnd 0, pull resistors
PULL, slide-switch as a pass-gate) and event-driven gates (reusing the
LogicGateParts boolean semantics), settles on busKernel, and exposes
setSwitch / readLed / netOf. Tolerant of both the raw example `type` and the
store `metadataId`. Returns {ok:false} for any non-primitive, so mixed/analog
circuits stay entirely on ngspice.
- digitalGateController.ts + a SimulatorCanvas useEffect: when the flag is on and
the circuit is all-digital, rebuild from the store on switch-toggle / load
(rAF-coalesced) and paint the wokwi-led DOM. CircuitSimulationService.tick()
skips the SPICE solve for all-digital circuits when the flag is on, so the two
motors never fight over the LEDs.
Tests: digitalgate-kernel (22 — single gates -> half/full adder -> 4-bit
adder/subtractor -> exhaustive ADD 256 -> mux/decoder/comparator/parity/
multiplier) and digitalgate-engine-examples (6 — the real gallery data for
and/or/xor/not + the full adder/subtractor). Verified live: ?digitalgates=on
lights the adder's result LEDs that the SPICE path leaves dark. Full suite
2117 pass / 5 pre-existing unrelated fails.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The gallery example loaded but the Z80 never visibly ran: the screen stayed
frozen on garbage. Two multi-chip async-load races, neither caught by the
existing headless tests (which drive RESET manually and attach the display
before boot):
1. RESET edge-vs-level race. The Z80 only left reset on the RISING edge of
RESET (a pin watch). In the browser the 7 chips instantiate asynchronously,
so the small power-on-reset chip releases RESET before the larger Z80 has
registered its watch -> the edge is lost and the CPU stays in reset forever.
Fix: on_clock samples the RESET level (hardware-accurate; RESET is
level-sensitive) so a missed edge self-corrects. An undriven RESET reads low,
so the CPU safely stays in reset until something drives it high.
Repro/guard: chipbus-galaksija-reset-race (race ordering must still boot).
2. Display-snoop load-order race. galaksija-display was a passive write-snoop;
the ROM paints the screen ONCE at boot then idles, so a display that comes up
late misses every write and shows stale content forever. A snoop cannot
recover writes it never saw. Fix: fold the screen into the RAM chip
(galaksija-ram-display) and render from the ACTUAL video RAM (0x2800-0x2BFF,
internal 0x0800 with A0-A12 wiring) on a ~30 fps timer - correct regardless
of load order, exactly how the real machine scans video RAM.
Repro/guard: chipbus-galaksija-display-snoop-race (late snoop shows nothing)
+ chipbus-galaksija-ram-display (renders even when first paint is post-boot).
The example now has 6 chips (RAM+display merged, gdisp dropped), 76 wires.
Verified live in the browser: boots to "@'READY", shows the ">" prompt, and
pressing A echoes ">A_" through keyboard -> Z80 -> video RAM -> display. The
full chipbus suite is 45/45.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Adds a memory-mapped keyboard so you can type into the Galaksija. Based on
the libretro Galaksija core's scheme (not guessed): reading 0x2000+offset
returns 0xFE when the key at that matrix offset is held, 0xFF otherwise;
the keyMap gives the offset per key ('A'=1 ... Enter=48, Space=31, etc.).
- galaksija-keyboard.c: drives reads of 0x2000-0x203F from a keys[] table and
exports set_key(offset, down) for the host to push key events. Never drives
outside the keyboard range.
- galaksija-ram.c: ram-64k variant that yields reads of 0x2000-0x203F to the
keyboard (writes still go to RAM), so the two never fight for the bus.
- ChipRuntime: ChipInstance.hasKeyboard + setKey() expose the chip's set_key.
- CustomChipPart: bridges browser keydown/keyup (by KeyboardEvent.code, via
GALAKSIJA_KEY_OFFSET) into the chip, ignoring keystrokes while the code
editor or an input is focused so typing code is never hijacked.
- The gallery example gains the keyboard chip (now 7 chips, 99 wires) and uses
galaksija-ram.
Test chipbus-galaksija-keyboard: pressing 'A' (offset 1) makes the BASIC
monitor echo "A" after its ">" prompt and advances the cursor. 41 chipbus
tests pass.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Ships the full Galaksija (1983 Z80 home computer) as a runnable Retro
gallery example, plus the pieces needed to run a multi-chip bus live in the
browser.
Gallery example (examples-retro-intel.ts, id 'galaksija-z80-computer'):
Z80 + galaksija-rom (public-domain ROM A+B) + ram-64k + inverter (A13
decode) + galaksija-display + a power-on reset chip, wired chip-to-chip
over the bus (76 wires), no board. Click Resume and it boots the real ROM
to the "READY" prompt on the green display. Chip wasm is embedded
(wasmBase64) so it runs without a backend compile.
- ChipRuntime.tickTimers gains a wall-clock budget (CustomChipPart passes
6 ms): a faithful-but-slow event-driven bus can't run a real-time CPU in
one animation frame, so without a cap a Z80 fetching over the settle
kernel froze the tab. With the budget the sim advances slower than real
time (boots over a few seconds) and the UI stays responsive; fast
single-chip examples finish under budget and are unaffected.
- galaksija-display: blits its framebuffer on a ~30 fps timer instead of on
every character write, so a clear-screen burst doesn't flood the canvas.
- reset-gen: power-on reset (pulses RESET high, ties WAIT/BUSREQ/INT/NMI
high) so the machine boots on Resume without a manual reset.
- chipbus flag now defaults ON (override with ?chipbus=off): chip-to-chip
buses are a core capability; single-chip and board nets never take this
path, so the only thing enabled is multi-chip buses, previously broken.
Verified live in the browser: the example boots and renders "@'READY" with
the ">_" prompt, responsive. Full suite 2084 pass (5 pre-existing,
unrelated env failures).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Galaksija stores ASCII codes in its 0x2800 video RAM (verified by snooping
the boot: it writes "@'READY" + ">_" prompt). The original CHRGEN ROM uses
a hardware-specific addressing that does not map char-code*8 to a glyph, so
rendering through it produced garbled output. Render the ASCII codes with
the public-domain IBM/VGA 8x8 font (font8x8 by Daniel Hepper / Marcel
Sondaar) instead -- legible green-on-black phosphor text. The boot screen
now reads "@'READY" with the ">_" input prompt, exactly like a real
Galaksija. Tests updated to check the bright-green channel.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
galaksija-display.c: a 32x16 text video chip that renders the Galaksija
video RAM. It is a passive bus snoop -- watches WR + address + data, and on
a write into the 0x2800 video region stores the character and renders that
cell into a 256x128 framebuffer using the public-domain CHRGEN font (code*8,
bit 0 = lit). It never drives the bus. The host blits the framebuffer to the
chip canvas (vx_framebuffer_init / vx_buffer_write).
Two tests:
- chipbus-galaksija-display: snoop+render smoke test (a write of 'R' to
0x2802 lights its cell; unwritten cells stay blank).
- chipbus-galaksija-computer: the COMPLETE machine over the chip-to-chip bus
(Z80 + galaksija-rom + ram-64k + inverter decode + galaksija-display) boots
the public-domain ROM and renders the monitor's "READY" prompt on screen.
40 chipbus tests across 10 files pass.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The public-domain Galaksija ROM (Voja Antonic; ROM A monitor + integer
BASIC, ROM B float BASIC, 8 KB) runs on a standalone Z80 + external ROM +
RAM + an inverter for address decode, all chip-to-chip over the shared bus,
no board:
ROM 0x0000-0x1FFF rom.CE = A13
RAM 0x2000-0x3FFF ram.CE = NOT A13 (the inverter chip)
RD -> both OE ; WR -> RAM WE
Pin-level boot proof (mirrors test_intel/test_z80/galaksija.test.js): watch
M1, read the address bus on each opcode fetch, and confirm the Z80 leaves
the reset vector (DI; SUB A; JP 0x03DA), reaches the init routine at 0x03DA,
and runs 1000+ fetches across 50+ distinct ROM addresses -- the real
firmware executing end-to-end through the settle-kernel bus. The on-screen
"READY" prompt is the next milestone (needs the video display chip
rendering the 0x2800 video RAM).
galaksija-rom.c embeds the public-domain ROM A+B image. 38 chipbus tests
across 8 files pass.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The architectural heart of the retro computer, proven on real chips. A Z80,
a 32K ROM, a 64K RAM and an inverter (address-decode glue) are wired
chip-to-chip over a shared address + data bus, no board:
ROM at 0x0000-0x7FFF rom.CE = A15
RAM at 0x8000-0xFFFF ram.CE = NOT A15 (the inverter chip)
RD -> both OE ; WR -> RAM WE
The ROM program writes 0x5A to RAM at 0x8000, clears A, reads it back, and
HALTs only if the byte survived. HALT going low proves the full core works:
the Z80 runs from ROM, the inverter decodes A15 to select RAM (the settle
kernel drives the combinational glue across hops), and the RAM latches a
write and returns it on a read over the shared tri-state bus, all within
synchronous bus cycles. Adds z80-ram-rom.c (boot image) + ram-64k/inverter
fixtures. 37 chipbus tests across 7 files pass.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
End-to-end validation of Phases 0-2 on an actual CPU. The real Z80
(examples/intel/z80.c) and a 32K EPROM (z80-boot-rom.c, a rom-32k variant
holding JP 0x0006 / HALT) are wired chip-to-chip over a shared address +
data bus with no board. RD drives the ROM's OE; CE is left enabled.
Booting exercises all three phases at once: the Z80 drives the address ->
the ROM reacts on the shared net key (Phase 0); asserts RD -> the ROM
tri-state-drives the data bus while the Z80 released it (Phase 1); and reads
the data bus in the SAME tickTimers step, getting the settled byte
(Phase 2 settle-before-read). The Z80 fetches C3,06,00, jumps to 0x0006,
fetches 76, and HALTs -> drives HALT low, which the test observes.
z80.wasm is compiled from the committed examples/intel/z80.c; the boot ROM
source + chip.json live in test_custom_chips/sdk/examples. All 36 chipbus
tests pass.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Fixes root cause B: a CPU bus cycle drives address+strobe then reads the
data bus in the same tickTimers call, so the memory chip must react before
the read. Phase 0/1 applied each net change by firing PinManager listeners
immediately, which recurses one JS frame per hop - deep glue chains are
deep recursion and a combinational loop overflows the stack.
- busKernel.ts: a delta-cycle settle loop. A net change is recorded in a
pending set, not applied recursively; settle() drains it in batches
(deltas), applying each and letting the driven chips re-dirty the next,
until a fixed point or DELTA_CAP trips (oscillation -> warn, not hang).
Two-phase: a drive lands in pending and is applied on the next delta, so
a chip evaluating mid-settle reads last-stable nets. The first drive of a
cycle settles synchronously before returning to the chip's C code, so the
in-cycle vx_pin_read sees settled data.
- busNets: publishes resolved levels through the kernel instead of calling
triggerPinChange directly.
Tests (chipbus-buskernel): multi-hop chain settles; settle-before-read; a
5000-hop chain settles without stack overflow; a ring oscillator trips the
cap and warns instead of hanging. The two-real-chip integration still
exchanges 0xA5 through the kernel. Full suite 2079 pass flag-off.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A chip-to-chip net is now resolved by (value, strength), not last-writer-
wins, so a real multi-driver bus works: many chips on one data line, only
the enabled one drives, the rest release to Hi-Z.
- busLogic.ts: 4-valued (0/1/Z/X) + drive-strength resolution. Strongest
driver wins; equal strength + opposite = X (contention); no driver = Z;
pull resistor = pull strength. modeToDrive maps VX_OUTPUT -> strong,
VX_INPUT -> Hi-Z (the rom/ram/8255 "release by input" idiom becomes real
tri-state), VX_INPUT_PULLUP/DOWN -> pull.
- busNets.ts: per-net driver registry; resolves and pushes the resolved
level into PinManager; warns once on contention.
- syntheticPins.ts: isSyntheticNetPin distinguishes bus net keys.
- ChipRuntime.ts: pin register/write/set_mode route bus-net pins through
busNets (gated by chipBusEnabled + isSyntheticNetPin); non-bus pins keep
the legacy path; dispose releases the chip's bus drivers. SPICE source
emission is skipped for bus pins (digital fast path beside SPICE).
Tests: busLogic (14), busNets (6, incl. tri-state hand-off + contention),
and the two-real-chip integration now exchanges 0xA5 through the registry.
Full suite 2074 pass with the flag off.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
End-to-end proof of the chip-to-chip net-key fix through the real
ChipRuntime + PinManager (not a unit stub). Two chips compiled from C
with wasi-sdk:
- bus-driver.c: drives 0xA5 onto D0..D7 at setup.
- bus-reader.c: polls D0..D7 on a 1ms timer, mirrors onto OUT0..OUT7.
Wired chip-to-chip with no board; with the chipbus flag both chips' Dn
pins resolve to one shared net key, so the reader reproduces 0xA5.
- sdk/examples/bus-{driver,reader}.{c,chip.json}: the proof chips.
- __tests__/fixtures/chipbus/*.wasm: committed fixtures (regenerate with
the test_intel/scripts/compile-chip.sh flags).
- __tests__/chipbus-twochip-integration.test.ts: loads the fixtures via a
relative path; skipIf they are absent.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Fixes root cause A of the multi-chip digital bus track
(project/multichip-bus/): chip-to-chip nets were keyed per-endpoint by
syntheticChipPin(chipId, pinName), so two chips on one wire resolved to
two different PinManager keys and never shared a net.
- chipNets.ts: union-find over the wire graph mints one canonical
syntheticNetPin per net; resolveChipNetKey returns it only for pure
chip-to-chip nets (>=2 chip endpoints, no board pin). Reuses the
existing spice/unionFind.ts.
- syntheticPins.ts: add syntheticNetPin(netId), same allocator/space.
- DynamicComponent.tsx: traceDetailed consults resolveChipNetKey at
depth 0 before the chipNeighbour fallback. Board priority (rule 1) and
chip-to-component (rules 2/3) are unchanged.
- Gated behind ?chipbus=on / localStorage.velxio.chipbus (off by default).
Proof (D-008 go/no-go): __tests__/chipbus-netkey.test.ts - a byte written
on one chip's keys is visible synchronously to another via PinManager.
9 new tests; 85 resolver/PinManager/parts regression tests green flag-off.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A user library that ships a core-named header (e.g. WiFiEspAT/src/WiFi.h)
could shadow the arduino-esp32 core during ESP-IDF library resolution.
WiFiEspAT shadowing WiFi.h pulled EspAtDrv.cpp into the build, whose
const char OK[]/STATUS[] collide with ESP-IDF's enum STATUS in
rom/ets_sys.h, breaking every ESP32 sketch that #include <WiFi.h>.
_resolve_library_components now:
- skips a header entirely when the arduino-esp32 core provides it
(computed set from cores/ + libraries/, cached), so a user lib can
never shadow WiFi.h/Wire.h/SPI.h/WebServer.h/...
- skips a resolved user lib whose library.properties architectures=
excludes esp32/*.
Regression: test/backend/unit/test_espidf_core_first.py
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The 7.5" 800x480 dashboard (GxEPD2_750_T7) rendered blank: it is a UC8179 /
GD7965 controller, but the panel config claimed controllerFamily 'ssd168x',
so the SSD168x decoder (which only reads 0x24/0x26/0x44/0x45) ignored its
0x10/0x13 DTM stream.
- Add a Uc8179 decoder (worker Uc8179EpaperSlave + browser Uc8179Decoder).
UC8179 is the same UltraChip command family as the UC8159c (0x10/0x13 DTM,
0x12 refresh) but mono (1 bit/px). GxEPD2 writes the visible image to 0x13
(DTM2 "current"; 0x10 is the ignored "previous"), framed by 0x91/0x90
(partial window, pixel coords MSB-first)/0x13 data/0x92. Data lands at
absolute pixel coords inside the window, so compose is just the RAM. The
Frame reuses the SSD168x palette (0=black, 1=white) so paintFrame renders it.
- EPaperPanels.ts: add the 'uc8179' family and point epaper-7in5-bw at it.
EPaperPart.ts + esp32_worker.py dispatch 'uc8179' to the new decoder.
- Fix the BUSY polarity: UC8179 (like the UC8159c) idles BUSY HIGH, not LOW.
The worker seeded BUSY LOW for every non-uc8159c panel, so GxEPD2_750_T7's
_PowerOn()/_InitDisplay() busy-wait timed out (~10 s, "Busy Timeout!") on
every refresh. Now _PowerOn returns in ~129 us.
- esp32_worker.py: the runtime sensor_attach epaper path still emitted the
epaper_update payload nested under 'data' (the old double-wrap bug); emit
it flat like the init path.
The 5.65" ACeP UC8159c example already rendered (it has its own decoder and
got the WS-plumbing fix); verified the 7 colour bars are correct.
The 2.9" tri-colour ESP32 alert badge rendered the red ALERT pill as white:
the red plane (0x26) was received but landed out of bounds and was dropped.
GxEPD2_3C writes the 0x24 (black) plane then the 0x26 (red) plane WITHOUT
re-seeking the RAM address counter between them — it relies on the SSD168x
counter wrapping back to the window start after the last byte of the window.
Our decoder advanced Y past the window end instead of wrapping, so every
0x26 byte hit y >= rows and was discarded (red_ram stayed all-init).
Mirror the hardware: when the X cursor wraps at the end of a row, advance Y
with a wrap at the active window boundary (yrange), honouring the data-entry
Y direction. Applied identically to the worker slave, the browser decoder,
and the Python golden reference so the three stay in lockstep. No regression
on the mono panels (their counter is re-seeked per plane, so the wrap is a
no-op for them); verified the tri-colour pill now renders red and the 2.9"
weather / 2.13" clock / 1.54" hello panels are unchanged.
ePaper panels rendered rotated/misaligned on AVR and RP2040 (e.g. the 2.13"
Pico clock came out sideways and clipped). The ESP32 worker decoder was just
taught to compose in the controller's native RAM geometry and rotate to the
display orientation, but the browser-side SSD168xDecoder (used by AVR/RP2040)
still composed at display dims with no rotation, so the two diverged.
- SSD168xDecoder.ts: port the worker's native-window compose + rotation.
* Size RAM to the longer side both ways so a rotated native layout
(128x296 behind a 296x128 panel) isn't truncated.
* Compose in the active RAM window, then rotate via the inverse of
Adafruit_GFX setRotation(1). Detect orientation by BYTE width so a
non-multiple-of-8 native width (the 2.13" panel is 122 px) is handled.
* Track the UNION of windows per frame: paged drivers (GxEPD2 page height
< panel) set one partial window per page, so compose must use the full
native area, not just the last page's strip. Fixes the all-white render
on paged panels (1.54" Uno, 4.2" Pico, 7.5" ESP32).
* Add an isBwr option: B/W panels treat 0x26 as a 2nd mono plane (white
only if both planes white), tri-colour panels keep red-wins.
* Default the active window to display geometry; the firmware overrides it.
- EPaperPart.ts: pass isBwr = cfg.palette === 'bwr' to the decoder.
- esp32_spi_slaves.py / esp32_worker.py: mirror the byte-aware rotation +
window-union in the worker, and derive is_bwr from panel_kind on the
runtime sensor_attach path too (fixes the tri-colour ESP32 alert badge).
- test_epaper/ssd168x_decoder.py: re-port the golden reference to match
(keeps the 3-way TS/Python/worker identity invariant). Tests updated to
construct tri-colour cases with is_bwr/palette='bwr'.
- examples-displays-epaper.ts: the Pico VCC wire referenced '3V3(OUT)',
which the velxio-pi-pico-w element doesn't expose (it has '3V3'), so the
wire snapped to the board corner. Use '3V3'.
ESP32 ePaper examples (e.g. epaper-2in9-esp32-weather) rendered as a blank
white panel. Two bugs, both above the SPI layer:
1. The worker's epaper_update event nested its payload under 'data', unlike
every other (flat) worker event. The backend qemu_callback re-wraps the
post-'type' payload under 'data', so the frontend received
msg.data.data.component_id (undefined) and EPaperPart bailed on
id !== componentId, so paintFrame/putImageData never ran. Emit it flat.
2. Ssd168xEpaperSlave was sized to the display dims (296x128), but GxEPD2
with setRotation(1) writes the controller's NATIVE RAM (128x296). The
_y < height bound dropped rows 128-295 (half the image) and compose
never rotated. Size RAM to the longer side, compose in the native
active-window geometry (0x44/0x45), then rotate to the display
orientation (inverse of Adafruit_GFX rotation 1). Add is_bwr (from
panel_kind): B/W panels init the 0x26 plane white and compose
white-only-if-both (GDEY029T94 mirrors the image into 0x26); tri-colour
panels keep red init 0x00 and red-wins.
A tag-based 'Retro' tab (next to All) collects the Z80 / Intel / vintage-CPU
examples via their 'retro' tag, regardless of board filter (they still also
appear under Digital). One-file change: BOARD_TABS + an isRetro predicate
special-cased in the filter and the tab count.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Reported: on a running circuit, clicking a pushbutton SELECTED the wire under it
instead of pressing the button — and you could still move wires / pick pins to
make connections during a run.
Root cause: component dragging was already locked during a run, but the
canvas-level onClick (wire selection via findWireNearPoint) wasn't — so a click
on a button bubbled to the canvas and selected the wire. The button press itself
fired (shadow DOM), but the wire-select made it feel broken.
Gate every EDIT interaction on the existing interactionRunning predicate while
keeping part interaction (buttons/switches/pots) and pan/zoom:
- canvas onClick wire-selection + onDoubleClick waypoint-insert
- wire segment / waypoint drag handles (mouse + touch)
- pin-click wire creation
- touch tap wire-selection
- hide the PinOverlay (was gated on !running, so board-less runs still showed
clickable pins) and skip wire-hover highlighting while running
- clear any wire/component selection when a run starts so leftover handles don't
linger over the live circuit
Component drag + property dialog were already gated on interactionRunning; this
extends the same 'freeze to edit, run to interact' model to wires and pins.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Phase 4 of the run-system work. The compile console now groups output into a
section per run target (board or chip) with a status glyph and label, the way
multiple Arduinos already stream — instead of one flat list.
- CompilationLog gains an optional target { id, label, kind: 'board'|'chip' }.
message/type are unchanged so the pro overlay (diagnose-with-AI prompt +
errorCount slot) and the console's length-based clear/auto-error heuristics
are untouched. parseCompileResult stamps the target on every produced line.
- Producers stamp their lines: compileAllBoards (per-board, dropping the old
'<label>: ' string prefix the header now carries), prepareCustomChips
(per-chip, WASM + ROM), handleCompile + handleRun MicroPython (single board) —
including the Pi / MicroPython / FQBN / error paths so a target's lines never
fragment across sections.
- CompilationConsole groups filteredLogs into consecutive-run sections at RENDER
time only (the flat array is unchanged); each target section shows ✓/✕/▸ +
name + kind tag, with no-target lines ('Compiling all targets', 'Done') as
plain narration around them.
Reviewed by an adversarial pass; the flagged un-stamped edge paths (Pi /
MicroPython / single-board errors) are now stamped.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Phase 3 of the run-system work. Generalises the boards-only Compile-All/Run-All
to RUN TARGETS = boards + programmable custom-chips, so a board+chip or several
chips compile and run together, the same way multiple Arduinos do.
- targetCount = boards + programmable chips; the Compile-All/Run-All buttons now
appear when targetCount > 1 (was boards.length > 1). Cheap string predicate
(no JSON.parse) since the selector runs on every sim tick.
- compileAllBoards builds chips (WASM+ROM) AND boards; works with zero boards;
prepareCustomChips now returns a failure count folded into the Done summary so
a failed chip no longer shows green / calls markCompiled.
- handleRunAll: compiles all targets, starts every board, then restartParts() so
chips pick up fresh WASM/ROM, and resumes the electrical solver when NO board
actually started (board-less, or a board that compiled to nothing) so chips
aren't left frozen.
Review fixes (2-agent adversarial pass):
- Stop now stops EVERY running board (Run-All can start several); otherwise a
non-active board kept the chip ticking after Stop.
- Run-All / Stop disabled gates use anyBoardRunning (+ digitalRunning) instead of
the flat active-board flag, which misreports multi-target runs.
- shared isQemuBoardKind() helper so handleRun and handleRunAll can't drift.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Phase 2 of the run-system/UX work.
- BoardInstance gains an optional user ; boardDisplayName(board) resolver
(name || kind label) routes every INSTANCE-label surface: file-explorer
section header, compile console (EditorToolbar), canvas selector/tooltip/
context-menu, Serial Monitor tabs, Oscilloscope board picker, Board Options
subtitle. Board/component pickers keep the KIND label (they pick new boards).
- Inline rename on board AND chip section headers (double-click the name, or a
hover pencil button). Board -> updateBoard(id,{name}); chip -> chipName in
properties. Enter commits, Escape cancels (cancel-flag ref guards the
unmount-fires-onBlur footgun), empty clears to the kind / 'Custom Chip'.
- FileTabs shows an owner badge naming the board/chip whose files are shown
(resolved as a selector so it doesn't re-render on every sim pin toggle).
- CustomChipDialog no longer clobbers a user-given chipName: chip.json's name
only seeds the blank defaults (My Chip / Custom Chip); loading an example
relabels explicitly.
- Persistence: board name round-trips via projectPayload (+ dirty hash),
vlxFile, ProjectByIdPage load + loadProjectState; chipName rides components_json.
- Drive-by: fixed a pre-existing rules-of-hooks violation in BoardOptionsModal
(early return before a useCallback).
Reviewed by a 3-agent adversarial pass (completeness / persistence / correctness);
all major findings folded in.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The pushbutton SPICE mapper reads pins '1.l' and '2.l', but killbits/counter
wired the power side to '2.r' (an un-unioned sub-pin), so netLookup('2.l')
returned null and the button was omitted from the netlist entirely — pressing
did nothing electrically board-less. Wire the power side via '2.l' so the
button becomes a real (pressed -> 0.01 ohm) bridge to VCC, which the pull-down
+ connectChipInputsToSolve then turn into a HIGH the chip reads.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The chip-output board-less path existed (chipPinDrives -> SPICE voltage sources
-> LEDs). The INPUT direction was missing: a chip pin wired to a pushbutton had
its net solved by ngspice, but nothing fed that net's state back to the
PinManager key the chip reads via vx_pin_read. So a board-less chip could light
LEDs but never read a button (verified: i8080 counter stayed at 0 on press).
connectChipInputsToSolve subscribes to the electrical store and, after each
solve, thresholds every wired chip input pin's net voltage to HIGH/LOW and
triggerPinChange()s the chip's synthetic pin — updating getPinState (polling)
and firing onPinChange edges. Pins the chip is actively driving are skipped so
it never fights its own outputs. Hooked alongside connectAnalogInputsToMcu in
start.ts. Solver-agnostic; reads only the electrical store shape.
Also gives the board-less button examples a pull-down on each chip BTN pin so
they read a clean LOW when open (a button-to-VCC floats HIGH otherwise):
i8080-button-counter (2) and i8080-killbits (8).
- new connectChipInputsToSolve.ts; start.ts wiring.
- examples-retro-intel: pull-down resistors + wires for the button examples.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Phase 1 of the run-system/UX work.
Stop bug: a programmable chip kept running after Stop when a board was present.
The chip rAF tick gated only on board presence (!boardless), so with a board it
ticked forever. Now it gates on the actual run state: board-less -> electrical
paused flag; with board(s) -> board.running. handleStop also clears every chip's
output drives (clearAllChipDrives) and re-solves so chip-driven LEDs go dark on
Stop instead of freezing at their last frame.
Examples to board-less (regulated power supply, no Arduino — the Arduino only
ever supplied 5V):
- z80-larson-scanner -> 'Z80 Comet Scanner': board-less, a faster TWO-LED comet
(scanner.s) so it's visually distinct from z80-larson-no-board's single-bit
walk; green/blue LEDs.
- i8080-killbits -> board-less (psu + resistors), keeps killbits.s as the chip's
editable program; buttons re-powered from the supply.
- i8080-button-counter -> board-less (psu + resistors); behaviour chip, program
baked in, so it shows a note (no editable file) and runs standalone.
banner-streamer stays Arduino-based (its TX/RX go through the AVR USART bridge).
- CustomChipPart: run-state-aware tick gate.
- EditorToolbar: clearAllChipDrives() helper + handleStop clears chip drives.
- examples-retro-intel: 3 conversions; drop now-unused sketch consts; add the
larsonScannerAsm comet program.
- Tests: board+chip routing now uses an inline synthetic example (gallery chip
examples are all board-less).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Document the full esp32-doom performance story: the bottleneck (per-event SPI
C->Python ctypes crossings, not QEMU compute / libqemu -O level / transport /
core version), the dead ends that gave zero gain and why (-O2 rebuild, async
_emit, blind CS-flush suppression), the two fixes (batch SPI data, gate CS
crossings) for 0.04 -> ~1 FPS (~26-37x), the build/test playbook, key files and
remaining headroom (the DC pin).
Worker side of the libqemu picsimlab_spi_event_batch / CS-gating change:
- _on_spi_batch(): replay a whole SPI transfer in bulk (custom-chip runtime,
then ePaper feed, then the spi_batch buffer) instead of one _on_spi_event per
byte. Registered as a trailing _SPI_BATCH field of _CallbacksT.
- _sync_cs_events(): disable SPI chip-select callbacks for pure-display sims,
enable them when an ePaper / custom-chip SPI slave is registered (no-op on
older libqemu without qemu_picsimlab_enable_spi_cs_events).
- _on_pin_change(): flush the SPI batch before each gpio_change so the byte
stream stays ordered against the DC pin now that CS no longer triggers the
flush.
Backward compatible: an older libqemu never calls the batch callback or the CS
setter, so it just keeps the per-byte path. esp32-doom: 0.04 -> ~1.0-1.5 FPS
wall-clock (~26-37x), render verified correct.
Two fixes from live testing feedback:
1. Adding a programmable chip (Z80/8080) from the gallery created NO program
group — only the chip(s) from the example had one. Root cause: 'programmable'
was detected by a non-empty programFile, but a fresh chip's programFile is
empty until the user writes one. Now detection uses the canonical signal —
chip.json's programTargets — via isProgrammableChip(). When such a chip
lands with no program yet, the file explorer seeds an editable program.c
(DEFAULT_CHIP_PROGRAM_C, a working walking-LED skeleton) into its own group
and stamps programFile/programTarget onto the component so Compile/Run can
build it. Behaviour/driver and predefined chips (no programTargets) still
get no group — edited in the chip designer.
2. z80-led-chaser-c now runs board-less on a regulated power supply (no Arduino,
mirroring z80-larson-no-board) — the Arduino only ever supplied 5V and added
confusion. chaser.c stays the chip's editable program in its own section.
- romCompileService: isProgrammableChip(), DEFAULT_CHIP_PROGRAM_FILE/_C.
- FileExplorer: detect by programTargets; auto-seed program.c + persist
programFile/programTarget for fresh chips.
- examples-retro-intel: chaser-c -> board-less (psu + 8 resistors + 8 LEDs),
drop the now-unused Arduino sketch const; fix a stale sdcc --code-loc comment.
- Tests: board+chip case moved to z80-larson-scanner (still board-based);
isProgrammableChip unit tests.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A programmable custom-chip (a CPU emulator that runs a ROM/program, e.g. the
Z80 or 8080) now keeps its program (larson.s, chaser.c, ...) in a dedicated
editor file group — group-chip-<chipId> — rendered as its own collapsible
section in the file explorer, exactly like each board owns its sketch group.
Behaviour/driver chips and predefined chips carry no programFile and get no
group; they stay editable only in the chip designer.
Fixes two reported issues on the Z80 examples:
- /example/z80-larson-no-board: the board-less chip example now opens its
program (larson.s) as the active group, editable on the left — previously
the editor showed but no file appeared.
- /example/z80-led-chaser-c: the chip program (chaser.c) no longer shows as
a sibling tab inside the Arduino sketch group; it sits in its own chip
section instead. The board group shows only sketch.ino.
Details:
- useEditorStore: chipFileGroupId()/CHIP_GROUP_PREFIX helpers.
- loadExample: seedChipProgramGroups() routes each chip's programFile into its
own group (seeded from the example files), sweeps stale chip groups, keeps
the program OUT of the board group, and for a board-less chip example makes
the chip group active so the program is the editable file shown.
- EditorToolbar.prepareCustomChips: resolves the program from the chip's own
group (falls back to board files for older projects) before assembling ROM.
- FileExplorer: renders one collapsible section per programmable chip with an
IC icon; clicking switches the editor to the chip group. Lazy-creates a
group for chips dropped on the canvas.
- projectPayload + vlxFile: serialise chip groups alongside board groups and
include them in the dirty-check hash, so chip-program edits persist on
save / autosave / .vlx export and round-trip via replaceFileGroups on load.
- Regression tests for board-less + board+chip routing and stale-group sweep.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two UX bugs in the board-less "Z80 Larson Scanner (no board)" example:
- It loaded "running" (electrical sim defaults to paused=false), so Run was
disabled and Stop enabled even though the chip hadn't started — the user had
to Stop then Run. loadExample now starts a board-less example that contains a
custom chip in the STOPPED state (paused=true) so Run is enabled; pure
analog/digital circuits stay live.
- The chip's program wasn't editable: it shipped a pre-baked ROM and the
board-less loader only setCode'd into an orphan file group (no-op → blank
editor). The example now ships larson.s as a real file (programFile), and
the board-less loader points the editor at the default group and loadFiles()
the example's files, so the program shows on the left and is editable, like
the board-backed examples. Run compiles it.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Velxio can now simulate one or more custom-chip CPUs with NO Arduino/ESP32
board on the canvas — a general-purpose electronics simulator, not an
MCU-only one.
- DynamicComponent: board-less parts get the real shared flat PinManager
(instead of a no-op stub) so a custom chip's digital pin writes/reads reach
the LEDs/inputs wired to it.
- CustomChipPart: the rAF tick respects board-less Run/Stop (freezes while
the electrical sim is paused); board behaviour is unchanged.
- EditorToolbar.handleRun: board-less Run compiles each chip's WASM/ROM and
re-attaches the parts (restartParts) so they pick up the fresh WASM, then
resumes the solver.
- useSimulatorStore.restartParts(): bump hexEpoch to force part re-attach.
- New example "Z80 Larson Scanner (no board)": a programmable Z80 + 8 LEDs +
the adjustable power-supply component, no MCU. The chip drives the LEDs
through the synthetic-pin + ngspice path added earlier.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
SDCC treats plain `char` as unsigned on Z80, so `dir = -1` read back as 255,
`if (dir > 0)` was always true, the "walk right" branch never ran, and the
bit just shifted left until it fell off the end and the LEDs went dark after
one pass. Use `signed char dir`. Verified in a chip-WASM harness: with plain
char the chaser does 8 LED writes then stops; with signed char it walks the
bit back and forth continuously (14894 writes). Completes the C example fix
together with dropping --code-loc 0x100 in c_compile.py.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
SDCC's z80 crt0 puts the reset vector at 0x0000 (jp init) and the init stub
(set SP, call _main) at an absolute .org 0x100. Passing `--code-loc 0x100`
relocated the _CODE segment on top of that init stub, so on reset the CPU
jumped into __clock/_exit (rst 0x08 then ret with a garbage stack) and
derailed into NOP land before ever reaching main — every Z80 C program ran
but drove nothing (z80-led-chaser-c compiled yet the LEDs never moved).
Verified via a standalone chip-WASM harness: with the flag the chaser does 0
LED writes; without it, it walks the bit (8 writes). Pairs with the z80-cpu
RAM map now covering 0x8000-0xFFFF so the crt0's SP=0 stack is real RAM.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
SDCC's z80 crt0 sets SP=0x0000 and makes its first stack push at 0xFFFF.
The chip only mapped RAM at 0x8000-0xBFFF (0xC000+ was MMIO/ignored), so the
stack landed on unmapped memory and a plain C program crashed inside crt0 —
before main — which is why z80-led-chaser-c compiled but drove nothing.
Extend RAM to cover 0x8000-0xFFFF (32 KB) with the MMIO window 0xC000-0xC0FF
carved out and checked first, in scripts/make-z80-cpu.py + regenerated
z80-cpu.c. Now SDCC's default stack works and "write C from scratch, click
Run" just works — no manual `LD SP` needed (dropped from chaser.c). Bumped
the chip WASM initial memory to 4 pages to hold the larger RAM buffer. Larson
(asm, SP=0xBFFF, LED at 0xC000) is unaffected.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
SDCC's z80 crt0 defaults SP to 0x0000; on the z80-cpu chip's memory map
(RAM 0x8000-0xBFFF, MMIO at 0xC000+) the stack would grow into unmapped
high memory and the program crashed on the first CALL (delay), so the LEDs
never moved. Set SP to the top of RAM (0xBFFF) at the start of main, the
same thing the asm Larson example does with "LD SP, 0xBFFF". Verified the
ROM runs and walks the LEDs.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
`(*(volatile unsigned char __at(0xC000)))` uses __at as a cast operator,
which neither avr-gcc nor sdcc accept (sdcc: "syntax error: token -> ')'").
__at is a storage specifier, not an operator. Use the portable absolute-
address pointer form `(*(volatile unsigned char *)0xC000)`, which sdcc -mz80
compiles cleanly. Verified: produces a 462-byte ROM.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A custom-chip output pin wired directly to a component (LED, resistor, ...)
had no Arduino pin on its net, so the chip could drive nothing and the pin
resolved to null. Now:
- Layer A (digital): such chip pins get a stable synthetic pin number
(syntheticPins.ts). traceDetailed resolves a chip<->component net to that
shared number, so the chip's PinManager drive reaches the wired components
through the existing digital event flow. A real board pin still wins.
- Layer B (analog/SPICE): a custom-chip mapper in componentToSpice emits a DC
voltage source on each driven output pin's net (recorded in chipPinDrives by
ChipRuntime), exactly like a board GPIO, and the chip requests an electrical
re-solve when it toggles a pin (electricalResolveHook -> service.tick).
So LEDs / resistors / analog parts wired to a chip output are driven by
ngspice too.
This makes the bundled Z80 / i8080 chip examples actually animate their LEDs,
and lets any custom chip drive components, passives and analog circuits from
its own pins. Non-chip circuits are unaffected.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Compile/Run now makes every custom-chip on the canvas live in a single
click instead of requiring a manual trip through the chip designer plus a
separate ROM compile:
- Each custom-chip's C source is auto-compiled to WASM when it has none
yet (via /api/compile-chip), and programmable CPU chips get their
program file (larson.s, chaser.c, ...) assembled/compiled to ROM bytes
(via /api/compile-rom) and injected, all before the board starts.
- Chip-program files are excluded from the arduino-cli sketch build, so
SDCC-only syntax such as __at(0xC000) no longer breaks the Arduino
compile (this is what made the Z80 LED-chaser-C example error out).
Fixes the Z80 examples that either errored on Run (z80-led-chaser-c) or
compiled but did nothing (z80-larson-scanner, whose chip never had WASM
or ROM). Works for any circuit built from scratch with a programmable
CPU chip, not just the bundled examples.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
velxio-deploy