Swap the programmatic SVGs for the real Fritzing breadboard art
(breadboard2.svg / miniBreadboard.svg from fritzing/fritzing-parts),
served from /component-svgs/fritzing/ and scaled x4/3 so the hole pitch
is the wokwi-standard 9.6 CSS px. pinInfo is computed from the measured
Fritzing hole grid (terminal col 1 at x=10.92, rails at x=25.33 in
5-hole groups; wokwi rows a-e map onto fritzing J..F on the full board,
1:1 on the mini; the red stripe marks the + row of each rail pair), so
wire endpoints land exactly on the drawn holes. The element reserves its
final size immediately and falls back to a light programmatic SVG with
identical geometry if the asset can't load. ATTRIBUTION.md records the
CC-BY-SA 3.0 license of the two SVG files.
Verified in the app: fritzing art renders for both boards, the LED
circuit through full-board column + mini column + ground rail still
lights, SPICE overlay shows the merged nets (5.00V on the pin-8 net).
Two distinct issues hit the component SVG generation step:
1. `velxio-bmp280` was in ELEMENTS but tries to require
bmp280-element.js from the wokwi-elements CJS dist — that file
doesn't exist because BMP280 is a velxio-native component, not a
wokwi one. Its SVG already ships hand-authored at
frontend/public/component-svgs/bmp280.svg, so the script should
never have tried to extract it. Drop the row and leave a comment
explaining why.
2. `wokwi-ssd1306` failed with "ImageData is not defined" because the
element constructor seeds an off-screen canvas with
`new ImageData(width, height)` — a browser API absent in Node.
We never invoke putImageData (renderSVG() draws the static frame
from scratch), so a minimal global stub that doesn't throw is all
that's needed. Polyfill it on globalThis next to the existing
customElements stub.
After this:
- 38 generated, 0 skipped, 0 failed (was: 1 skip, 1 fail).
- ssd1306.svg now ships in frontend/public/component-svgs/.
The hand-drawn SVGs in Bmp280Element.ts and Attiny85Element.ts were
functional but obviously amateur next to a real Fritzing-drawn part.
Both components now mount the equivalent Fritzing breadboard SVG as a
public static asset (`<image href>` in the shadow DOM SVG), with pin
coordinates remapped to the new artwork and pin-name labels overlaid
on top so the user can still read each connector at a glance.
frontend/public/component-svgs/bmp280.svg (new)
Verbatim copy of third-party/fritzing-parts/svg/core/breadboard/
bmp180_breadboard.svg. The Adafruit BMP180 breakout is the
mechanically identical Bosch predecessor — same I2C interface,
same 4-pin pinout. Pin labels lifted from the matching .fzp.
frontend/public/component-svgs/attiny85.svg (new)
Verbatim copy of the Fritzing ATtiny85 DIP-8 breadboard art.
Bmp280Element.ts
Width 80×100 px (Fritzing aspect 28.35:35.43 ≈ 0.8:1, exact uniform
scale of 2.822 px/mm). Pin coords for SDA / SCL / GND / VCC matched
to the connector centres in the source SVG. Pin labels overlaid on
top. Existing wired example (esp32-bmp280) re-routes automatically
because the wire system reads coords by pin name from pinInfo.
Attiny85Element.ts
Width 160×132 px (Fritzing aspect 28.801:23.768 ≈ 1.21:1, exact
uniform scale of 5.555 px/mm). The Fritzing layout puts pins on the
TOP and BOTTOM edges (4 each), not LEFT and RIGHT like the older
hand-drawn version. Pin coords land on clean numbers
(x ∈ {20, 60, 100, 140}, y ∈ {6, 126}). Built-in LED on PB1 stays
as an overlaid circle outside the chip body.
Wires in the existing attiny85-* examples re-route automatically by
pin name; external components positioned to the right of the chip
may need a manual nudge for clean routing — but they work.
frontend/src/components/simulator/BoardOnCanvas.tsx
attiny85: { w: 160, h: 100 } → { w: 160, h: 132 } to match the new
aspect ratio. Same width as before so the chip occupies the same
horizontal slot in existing example layouts.
scripts/component-overrides.json
BMP280 thumbnail updated to mirror the Fritzing colour scheme
(dark blue PCB, BMP180 silkscreen, four gold connector circles)
so picker and canvas feel consistent.
frontend/public/components-metadata.json
Regenerated.
docs/THIRD_PARTY.md
New "Fritzing parts library" section. Both new assets are listed
with their upstream paths plus the CC-BY-SA licence and link to
the parts repo. Future Fritzing copies must be added there too.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
https://github.com/kritishmohapatra/100_Days_100_IoT_Projects
- Introduced `_lib.py` containing shared validators for board support and static source analysis for MicroPython projects.
- Added `conftest.py` to configure pytest for the test suite, simplifying import paths.
- Created `NOT_SUPPORTED.md` files for two projects indicating they cannot be emulated in Velxio due to lack of source code.
- Implemented unit tests for the unsupported projects to verify the presence of the NOT_SUPPORTED marker and source preservation.
- Implemented Bmp280Element as a custom web component for the BMP280 barometric sensor, including SVG representation and pin configuration.
- Created CircuitPreview component to render circuit thumbnails using SVGs of components, including support for various boards and components.
- Added a script to generate SVG files from wokwi-elements, ensuring proper formatting and structure for reliable rendering.
- Introduced a test HTML generation script to visualize component SVGs.
David Montero Crespo