ESP32-C3 already uses the QEMU backend via Esp32Bridge, not browser-side
emulation. This adds MicroPython support by including C3 in the supported
set, adding the C3 firmware variant to the loader, and bundling the
fallback firmware binary.
Also fixes misleading type comments that said "browser emulation" for C3
boards — they actually use QEMU backend.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Extends MicroPython support (Phase 2) to ESP32 Xtensa boards running on
QEMU. Firmware is downloaded from micropython.org, cached in IndexedDB,
and loaded into QEMU. User code is injected via the raw-paste REPL
protocol after the MicroPython REPL boots.
- Create Esp32MicroPythonLoader.ts for firmware download/cache
- Add raw-paste REPL injection (Ctrl+A → Ctrl+E → code → Ctrl+D) to Esp32Bridge
- Extend loadMicroPythonProgram in store for ESP32 path
- Add ESP32 default MicroPython content (GPIO 2 blink)
- Simplify SerialMonitor Ctrl+C/D to work for all MicroPython boards
- Bundle fallback firmware for ESP32 and ESP32-S3
- Add all ESP32 board variants to SerialMonitor tab maps
Closes#3 (Phase 2)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Implements MicroPython emulation for Raspberry Pi Pico boards running
entirely in the browser using rp2040js. Users can toggle between
Arduino C++ and MicroPython modes via a language selector dropdown.
Key changes:
- Add LanguageMode type and BOARD_SUPPORTS_MICROPYTHON to board types
- Create MicroPythonLoader.ts: UF2 firmware parser, LittleFS filesystem
builder (via littlefs-wasm), IndexedDB firmware caching
- Extend RP2040Simulator with loadMicroPython() method using USBCDC for
serial REPL instead of UART
- Add setBoardLanguageMode and loadMicroPythonProgram store actions
- Update EditorToolbar with language toggle and MicroPython compile flow
- Enhance SerialMonitor with REPL label, Ctrl+C/D support
- Bundle MicroPython v1.20.0 UF2 firmware as fallback in public/firmware/
- Update useEditorStore to create main.py default for MicroPython mode
Closes#3
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Resize image.png from 2816x1536 to 1400x764 (7.3MB → 1.9MB, -74%)
- Add image.webp version (201KB, -97% vs original)
- Update nginx.conf to auto-serve WebP via Accept header negotiation
- Update LandingPage.tsx to use <picture> with WebP source + lazy loading
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Created Esp32S3SimulatorPage.tsx with SEO content and FAQ section.
- Created Esp32SimulatorPage.tsx with SEO content and FAQ section.
- Created RaspberryPiPicoSimulatorPage.tsx with SEO content and FAQ section.
- Created RaspberryPiSimulatorPage.tsx with SEO content and FAQ section.
- Each page includes structured data for better search engine visibility.
- Implemented ArduinoMegaSimulatorPage with detailed specifications, FAQs, and JSON-LD for SEO.
- Created ArduinoSimulatorPage featuring interactive components and a comprehensive FAQ section.
- Developed AtmegaSimulatorPage to simulate ATmega328P with full AVR8 emulation and included relevant FAQs.
- Introduced shared SEOPage.css for consistent styling across all simulator pages.
- Added useSEO utility for managing SEO metadata dynamically across pages.
- Created arduino-nano.svg with detailed PCB, MCU, pins, and components.
- Created arduino-uno.svg with comprehensive design including USB connector, power jack, and pin headers.
- Updated components-metadata.json with new generated timestamp.
- Refactored Esp32C3Simulator.ts to remove unnecessary debug variables and logging, and added support for additional ROM functions.
- Modified useSimulatorStore.ts to clarify bridge usage for ESP32 boards.
- Updated submodules for QEMU and other libraries to indicate dirty state.
- Added test_esp32c3_emulation.py for end-to-end testing of ESP32-C3 emulation, including compilation, flash image merging, and GPIO event checking.
- Added detailed logging for GPIO changes, system events, and errors in simulation websocket.
- Improved ESP32 firmware handling by merging individual binaries into a single 4MB flash image.
- Updated ESP32 bridge to handle serial output and GPIO changes with appropriate logging.
- Introduced integration test for ESP32 emulation, covering compilation, WebSocket connection, and event handling.
- Enhanced examples to include ESP32 projects and updated the examples gallery to reflect new board types.
- Refactored simulator store to manage ESP32 bridge and simulator instances more effectively.
- Updated requirements to include esptool for ESP32 firmware management.
Keep only build_qemu_step4.sh (the DLL relink step used in production).
Deleted: build_qemu_dll.sh, build_qemu_step3.sh, check_tools.sh,
fix_distlib.sh, fix_distlib2.sh, install_git.sh, install_meson.sh
(all were used once during initial DLL compilation setup)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Added LogicGateParts.ts for simulating various logic gates (AND, NAND, OR, NOR, XOR, NOT).
- Introduced ProtocolParts.ts for simulating I2C and SPI components including SSD1306 OLED, DS1307 RTC, MPU6050 IMU, DHT22 sensor, HX711 load cell, IR receiver, IR remote, and MicroSD card.
- Implemented BasicParts.ts with a membrane keypad and rotary dialer simulations.
- Enhanced SensorParts.ts with a single NeoPixel and PIR motion sensor.
- Updated index.ts to include new parts for logic gates and protocols.
- Modified vite-env.d.ts to declare new custom elements for the added components.
- Introduced new SensorParts.ts to handle various sensors including tilt switch, temperature sensor, gas sensor, flame sensor, heart beat sensor, and sound sensors.
- Implemented stepper motor simulation with full-step decoding.
- Added utility functions for ADC voltage injection in partUtils.ts, supporting both AVR and RP2040.
- Updated BasicParts.ts to avoid re-registering the 7-segment display.
- Enhanced ComplexParts.ts by removing unused ADC helper functions.
- Updated index.ts to include the new SensorParts module.
- Updated Vite environment definitions to include new custom elements for sensors and stepper motors.
- Implemented `require_admin` dependency to enforce admin access control.
- Added `is_admin` column to the users table for role management.
- Created admin routes and schemas for user and project management.
- Developed AdminPage with user and project management tabs.
- Integrated user editing and deletion functionalities in the admin panel.
- Added setup screen for creating the first admin user.
- Updated frontend to include admin functionalities and user role display.
- Generated Open Graph image for better social media integration.
Redesign favicon.svg with solid filled shapes (visible at 16px tab size).
Regenerate all PNG/ICO sizes (16, 32, 48, 180, 192, 512) from new design.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Added comprehensive SEO meta tags to `frontend/index.html` including Open Graph and Twitter Card data.
- Updated `frontend/public` with new favicon assets and a PWA manifest.
- Created a favicon generation script to automate favicon creation from SVG.
- Implemented `robots.txt` to allow all crawlers and point to the sitemap.
- Added `sitemap.xml` with public routes and priorities for better indexing.
- Add LoginPage and RegisterPage for user authentication.
- Create UserProfilePage to display user projects.
- Implement ProjectPage for viewing and editing individual projects.
- Introduce authService for handling user login, registration, and session management.
- Add projectService for managing project data retrieval and manipulation.
- Enhance EditorPage with file management capabilities and save prompts.
- Introduce Zustand stores for managing authentication, editor state, and project state.
- Add reserved usernames utility to prevent certain usernames during registration.
- Update compilation service to handle multiple files for Arduino sketches.
- Removed outdated WOKWI_LIBS.md and replaced with updated documentation.
- Added ARCHITECTURE.md to describe project structure and data flow.
- Created SETUP_COMPLETE.md for installation and configuration instructions.
- Implemented automatic update script for Wokwi libraries.
- Updated frontend components to utilize local Wokwi libraries.
- Enhanced AVRSimulator to manage peripherals more efficiently.
- Added example screenshot generation instructions for better documentation.
- Updated components metadata and ensured proper integration with Vite.
- Updated components-metadata.json with new generation timestamp.
- Added event handling for button presses and releases in DynamicComponent.
- Improved ExamplesGallery with new styles for placeholders and previews.
- Introduced LCD 20x4 display example with corresponding code and wiring.
- Enhanced SimulatorCanvas to subscribe components to pin changes.
- Implemented PartSimulationRegistry for managing component simulation logic.
- Added basic and complex parts simulation including pushbuttons, LEDs, and LCDs.
- Created utility functions for capturing canvas previews and generating SVG previews for example projects.
- Created a new TypeScript file for component metadata types defining structure for dynamically loaded components.
- Implemented a metadata generator script that scans the wokwi-elements repository to extract component information, including properties and categories.
- Added package.json and package-lock.json for dependency management, including TypeScript and related tools.
- Introduced a new file to log ping statistics for testing purposes.
- Added SimulatorCanvas component for rendering the simulator interface.
- Integrated Wokwi components (Arduino, LED, Resistor, Pushbutton, Potentiometer) into the simulator.
- Created PinManager to handle pin state changes and notifications.
- Developed AVRSimulator class for emulating Arduino Uno functionality.
- Implemented hex file loading and compilation service.
- Added CSS styles for the simulator interface.
- Established Zustand stores for managing editor and simulator states.
- Created utility functions for parsing Intel HEX format.
- Set up Vite configuration for the frontend project.
- Added batch scripts for starting backend and frontend servers, and updating Wokwi libraries.
David Montero Crespo
copilot-swe-agent[bot]