History

carlosgs 77f831a50f Update README.md		2013-07-29 00:04:32 -07:00
..
ArduinoAddons	Added the Firmware and Software folders	2013-05-25 15:19:18 +02:00
Marlin	Added new XY gear ratio	2013-06-02 18:04:34 +02:00
libraries	Added the Firmware and Software folders	2013-05-25 15:19:18 +02:00
.gitignore	Added the Firmware and Software folders	2013-05-25 15:19:18 +02:00
README.md	Update README.md	2013-07-29 00:04:32 -07:00

README.md

Description

This is a patch of Marlin by ErikZalm (https://github.com/ErikZalm/Marlin) that adds probing command (G30) with the functions developed by larsbrubaker (https://github.com/ErikZalm/Marlin/pull/323)

The changes made (marked as CGS MOD) are hereby released on the public domain.

Quick Information

You must setup two endstops for the Z axis, the lower one is considered our "probe"

Pin definitions (from "pins.h")

  
// We are using the Z_MIN endstop as a probe  
// Also, we have our Z_MAX endstop to limit the vertical movement of the spindle  
#define Z_PROBE_PIN 27  // using Sanguinololu, pin 36 (D27) , labeled A4  
#define Z_PROBE_HIT_VALUE 0 // Switch this if your probe gives an inverted value

Disclaimer

This hardware/software is provided “as is," and you use the hardware/software at your own risk. Under nocircumstances shall Carlosgs be liable for direct, indirect, special, incidental, or consequential damages resulting from the use, misuse, or inability to use this hardware/software, even if Carlosgs has been advised of the possibility of such damages.