cyclone-pcb-factory/Hardware/CYCLONE_2/INHERITED/vacuum_cleaner_attachment_2...

140 lines
4.9 KiB
OpenSCAD

dremel_accessory_diam = 20;
dremel_accesory_height = 15-2;
screws_vertical_offset = 1;
aspirator_thickness_thick = 2;
aspirator_thickness_slim = 1;
aspirator_thickness_screw = 4;
aspirator_tube_diam = 16+0.5;
aspirator_tube_holder_height = 15;
aspirator_hole_height = 15-5;
aspirator_hole_diam = 35+15;
aspirator_hole_Yscale = 0.5;
edge_height = 2;
dremel_wrench_diam = 0;
dremel_wrench_hole_offset = 8;
dremel_accessory_screw_separation = dremel_accessory_diam+aspirator_thickness_screw+0.8;
dremel_accessory_angle = 0;
dremel_accessory_tube_offset = dremel_accessory_diam-aspirator_tube_diam;
aspirator_tube_separation = dremel_accessory_diam+aspirator_tube_diam+aspirator_thickness_screw*2+1.5;
dremel_accessory_hole_offset = 0;//dremel_accessory_diam-aspirator_hole_diam;
// Useful MCAD functions reference
//use <MCAD/motors.scad>
//stepper_motor_mount(nema_standard=17, slide_distance=10, $fn=40, mochup=true);
//use <MCAD/boxes.scad>
//roundedBox([10,20,30], radius=2, sidesonly=false, $fn=60);
//include <MCAD/stepper.scad>
//motor(Nema17, size=NemaMedium, dualAxis=false);
//use <MCAD/teardrop.scad>
//teardrop(radius=10, length=20, angle=90);
//use <MCAD/nuts_and_bolts.scad>
//nutHole(size=3, tolerance=0.5, proj=-1);
//boltHole(size=3, length=10, tolerance=0.5, proj=-1, $fn=40);
use <MCAD/teardrop.scad>
use <MCAD/nuts_and_bolts.scad>
module aspirator_accessory_2Dshape() {
hull() {
translate([aspirator_tube_separation/2,-dremel_accessory_tube_offset/2])
circle(r=aspirator_thickness_thick+aspirator_tube_diam/2, h=dremel_accesory_height, $fn=60);
circle(r=aspirator_thickness_thick+dremel_accessory_diam/2, h=dremel_accesory_height, $fn=60);
translate([-aspirator_tube_separation/2,-dremel_accessory_tube_offset/2])
circle(r=aspirator_thickness_thick+aspirator_tube_diam/2, h=dremel_accesory_height, $fn=60);
}
}
module aspirator_accessory_filledshape() {
linear_extrude(height=dremel_accesory_height,center=true)
aspirator_accessory_2Dshape();
hull() {
translate([0,0,-dremel_accesory_height/2])
linear_extrude(height=0.001,center=true)
aspirator_accessory_2Dshape();
translate([0,dremel_accessory_hole_offset/2,-dremel_accesory_height/2-aspirator_hole_height])
linear_extrude(height=0.001,center=true)
scale([1,aspirator_hole_Yscale,1]) circle(r=aspirator_thickness_slim+aspirator_hole_diam/2, $fn=60);
}
hull() {
translate([0,dremel_accessory_hole_offset/2,-dremel_accesory_height/2-aspirator_hole_height])
linear_extrude(height=0.001,center=true)
scale([1,aspirator_hole_Yscale,1]) circle(r=aspirator_thickness_slim+aspirator_hole_diam/2, $fn=60);
translate([0,dremel_accessory_hole_offset/2,-dremel_accesory_height/2-aspirator_hole_height-edge_height])
linear_extrude(height=0.001,center=true)
scale([1,aspirator_hole_Yscale,1]) circle(r=aspirator_thickness_slim+aspirator_hole_diam/2+edge_height/2, $fn=60);
}
}
module aspirator_accessory_2Dholes() {
translate([aspirator_tube_separation/2,-dremel_accessory_tube_offset/2])
circle(r=aspirator_tube_diam/2, $fn=60);
circle(r=dremel_accessory_diam/2, $fn=60);
translate([-aspirator_tube_separation/2,-dremel_accessory_tube_offset/2])
circle(r=aspirator_tube_diam/2, $fn=60);
}
module screwHole() {
translate([0,-7,0])
rotate([90,0,0])
hull() {
translate([0,0,20])
nutHole(size=3, tolerance=0.5, proj=-1);
nutHole(size=3, tolerance=0.5, proj=-1);
}
translate([0,aspirator_tube_diam/2,0])
rotate([90,0,0])
boltHole(size=3, length=30, tolerance=0.4, proj=-1, $fn=40);
}
module aspirator_accessory_holes() {
linear_extrude(height=dremel_accesory_height+0.01,center=true)
aspirator_accessory_2Dholes();
hull() {
translate([0,0,-dremel_accesory_height/2+0.01])
linear_extrude(height=0.001,center=true)
aspirator_accessory_2Dholes();
translate([0,dremel_accessory_hole_offset/2,-dremel_accesory_height/2-aspirator_hole_height+1-0.01])
linear_extrude(height=0.001,center=true)
scale([1,aspirator_hole_Yscale,1]) circle(r=aspirator_hole_diam/2, $fn=60);
}
translate([0,dremel_accessory_hole_offset/2,-dremel_accesory_height/2-aspirator_hole_height-1])
linear_extrude(height=2+edge_height+0.1,center=true)
scale([1,aspirator_hole_Yscale,1]) circle(r=aspirator_hole_diam/2, $fn=60);
// Hole for the tightener
translate([0,-dremel_accessory_tube_offset/4,0])
cube([aspirator_tube_separation,2.5,dremel_accesory_height+0.01],center=true);
// Frontal hole for the wrench
translate([0,(dremel_accessory_diam+aspirator_thickness_thick)/2,-(dremel_accesory_height+aspirator_hole_height)/2-dremel_wrench_hole_offset])
cube([dremel_wrench_diam,10,aspirator_hole_height+0.01],center=true);
// Holes for the nut/screws
#translate([dremel_accessory_screw_separation/2,0,screws_vertical_offset])
rotate([0,0,-dremel_accessory_angle])
screwHole();
#translate([-dremel_accessory_screw_separation/2,0,screws_vertical_offset])
rotate([0,0,dremel_accessory_angle])
screwHole();
}
difference() {
aspirator_accessory_filledshape();
aspirator_accessory_holes();
}