100 lines
2.8 KiB
OpenSCAD
100 lines
2.8 KiB
OpenSCAD
/* Derived by Carlosgs from:
|
|
* http://www.thingiverse.com/thing:12789
|
|
* An extruder gear set for the TechZone Huxley,
|
|
* featuring Herringbone teeth.
|
|
* You will have to recalibrate your E_STEPS_PER_MM in
|
|
* your firmware (ratio changing from original techzone
|
|
* lasercut gears).
|
|
* This use 2 modules from the MCAD library that you can
|
|
* get from https://github.com/elmom/MCAD.
|
|
*
|
|
* Part - the motor gear mount hub with set screw hole -
|
|
* derived from http://www.thingiverse.com/thing:3104
|
|
* (thanks GilesBathgate) which is under GPL CC license.
|
|
*
|
|
* Copyright (C) 2011 Guy 'DeuxVis' P.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
|
|
* --
|
|
* DeuxVis - device@ymail.com */
|
|
|
|
include <MCAD/involute_gears.scad>
|
|
|
|
M8_nut_diameter = 15.3;
|
|
nut_separation = 5;
|
|
|
|
SmallGear_N_Teeth = 15;
|
|
M8_rod_diam = 8.6;
|
|
|
|
// Increase the resolution of default shapes
|
|
$fa = 5; // Minimum angle for fragments [degrees]
|
|
$fs = 0.5; // Minimum fragment size [mm]
|
|
|
|
/* Herringbone gear module, adapted from MCAD/involute_gears */
|
|
module herringbone_gear( teeth=12, circles=0, shaft=5 ) {
|
|
twist=0;//100;
|
|
height=10;
|
|
pressure_angle=30;
|
|
|
|
diam = teeth*2;
|
|
|
|
truncation_length = 2.8;
|
|
truncation_height = height/2.5;
|
|
|
|
module myGear() {
|
|
difference() {
|
|
gear(
|
|
number_of_teeth=teeth,
|
|
circular_pitch=320,
|
|
pressure_angle=pressure_angle,
|
|
clearance = 0.2,
|
|
gear_thickness = height/2,
|
|
rim_thickness = height/2,
|
|
rim_width = 1,
|
|
hub_thickness = height/2,
|
|
hub_diameter=1,
|
|
bore_diameter=shaft,
|
|
circles=circles,
|
|
twist=twist/teeth
|
|
);
|
|
mirror([0,0,1]) translate([0,0,-height/2-0.01]) {
|
|
difference() {
|
|
cylinder(r=diam/2+1, h=truncation_height);
|
|
translate([0,0,-0.01])
|
|
cylinder(r1=diam/2-truncation_length, r2=diam/2+1, h=truncation_height+0.02);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
myGear();
|
|
mirror( [0,0,1] )
|
|
myGear();
|
|
}
|
|
|
|
module cyclone_rod_gear(with_extra_parts=false, exploded=false) {
|
|
// Extruder Gear
|
|
difference() {
|
|
union() {
|
|
//gear
|
|
rotate([180,0,0]) herringbone_gear( teeth=SmallGear_N_Teeth, circles=0, shaft=M8_rod_diam);
|
|
}
|
|
|
|
translate( [0, 0, (nut_separation/2)] ) cylinder( r=M8_nut_diameter/2, h=7, $fn=6 );
|
|
}
|
|
}
|
|
|
|
cyclone_rod_gear();
|