cyclone-pcb-factory/Source_files/Inherited_files/Zgears/Zrod_gear.scad

100 lines
2.8 KiB
OpenSCAD

/* Derived by Carlosgs from:
* http://www.thingiverse.com/thing:12789
* An extruder gear set for the TechZone Huxley,
* featuring Herringbone teeth.
* You will have to recalibrate your E_STEPS_PER_MM in
* your firmware (ratio changing from original techzone
* lasercut gears).
* This use 2 modules from the MCAD library that you can
* get from https://github.com/elmom/MCAD.
*
* Part - the motor gear mount hub with set screw hole -
* derived from http://www.thingiverse.com/thing:3104
* (thanks GilesBathgate) which is under GPL CC license.
*
* Copyright (C) 2011 Guy 'DeuxVis' P.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
* --
* DeuxVis - device@ymail.com */
include <MCAD/involute_gears.scad>
M8_nut_diameter = 15.3;
nut_separation = 5;
SmallGear_N_Teeth = 15;
M8_rod_diam = 8.6;
// Increase the resolution of default shapes
$fa = 5; // Minimum angle for fragments [degrees]
$fs = 0.5; // Minimum fragment size [mm]
/* Herringbone gear module, adapted from MCAD/involute_gears */
module herringbone_gear( teeth=12, circles=0, shaft=5 ) {
twist=0;//100;
height=10;
pressure_angle=30;
diam = teeth*2;
truncation_length = 2.8;
truncation_height = height/2.5;
module myGear() {
difference() {
gear(
number_of_teeth=teeth,
circular_pitch=320,
pressure_angle=pressure_angle,
clearance = 0.2,
gear_thickness = height/2,
rim_thickness = height/2,
rim_width = 1,
hub_thickness = height/2,
hub_diameter=1,
bore_diameter=shaft,
circles=circles,
twist=twist/teeth
);
mirror([0,0,1]) translate([0,0,-height/2-0.01]) {
difference() {
cylinder(r=diam/2+1, h=truncation_height);
translate([0,0,-0.01])
cylinder(r1=diam/2-truncation_length, r2=diam/2+1, h=truncation_height+0.02);
}
}
}
}
myGear();
mirror( [0,0,1] )
myGear();
}
module cyclone_rod_gear(with_extra_parts=false, exploded=false) {
// Extruder Gear
difference() {
union() {
//gear
rotate([180,0,0]) herringbone_gear( teeth=SmallGear_N_Teeth, circles=0, shaft=M8_rod_diam);
}
translate( [0, 0, (nut_separation/2)] ) cylinder( r=M8_nut_diameter/2, h=7, $fn=6 );
}
}
cyclone_rod_gear();