42 lines
1.3 KiB
Python
42 lines
1.3 KiB
Python
# Begin configuration
|
|
BAUDRATE = 115200
|
|
DEVICE = "/dev/ttyUSB0"
|
|
Emulate = False # Won't connect to the machine, will emulate the commands!
|
|
|
|
# For GenerateGcode and Send
|
|
filePath = "./GcodeGenerators/pyGerber2Gcode_CUI/out/"
|
|
fileName = "4LDR_Board"
|
|
# Note: Don't forget to edit ./GcodeGenerators/pyGerber2Gcode_CUI/pygerber2gcode_cui_MOD.conf to match the name and board files
|
|
|
|
# For Zprobe
|
|
GRID_N_POINTS = (4,4) # Number of points (AT LEAST 4 IN EACH DIRECTION, OTHERWISE INTERPOLATION WILL FAIL)
|
|
Zlift = 0.5 # mm # Lift between probings, it is relative so should be enough
|
|
|
|
# For Zprobe and Send
|
|
F_fastMove = 70000 # mm/s
|
|
F_slowMove = 20000 # mm/s
|
|
initial_Z_lowering_distance = -5 # Warning: Do not lower too much or you will potentially cause damage!
|
|
|
|
N_copies_X = 1 # Panelizing options!
|
|
N_copies_Y = 1
|
|
margin_copies_X = 5 # mm
|
|
margin_copies_Y = 5 # mm
|
|
|
|
# For Send
|
|
# IMPORTANT: Select the gcode that is to be milled (only one at a time)
|
|
showEtch=1
|
|
showEtch2=0
|
|
showEtch3=0
|
|
showDrill=0
|
|
showEdge=0 # Caution, buggy!
|
|
|
|
Zlift_milling = 1.0 # mm
|
|
Z_global_offset = -0.02 #-0.018 go deeper!
|
|
|
|
maxDistance = 1**2 # [mm^2] 2mm (longer moves will be split to regulate Z)
|
|
minDistance = 0.001**2 # [mm^2] 0.001mm is the smallest distance that will be sent
|
|
|
|
Z_PROBING_FILE = "Z_probing_data.p"
|
|
# End configuration
|
|
|