Antibacklash device 2 nuts and 1 spring embedded in a plastic piece that
screws to the X carriage
For now only accepts springs up to 35mm long
TODO:
design can be trimmed to get any value.
New idler based on the one used in the Mendel90 although there are
improvements such as the nut trap.
I added a new library called MCAD to /libs folder basically it is nuts,
bolts gears and screws.
The logo has been added as a .dxf file created in Inkscape.
I have added another library "logo" to /libs folder it contains the
dxf file.
STL files with and without logo added to /Hardware/Y_axis/stl/
Frame edited to have:
*Interior Hexagonal grid to have a more robust frame.
*Extra 3 screw holes to have a more robust union to the wooden base.
*Added an extra rod to the back of the frame to give robustness as I have seen that the whole frame twists when z motor encounters some resistance.
"y" motor stand provided with 2 bases/screw terminals. Seems to be much more robust than the single legged version.
If needed I can upload de .scad file although it is not following the programming style of the original file, it is more an add-on.
yopero
carlosgs