diff --git a/Output_files/STL_plates/Cyclone_fullPlate.stl b/Output_files/STL_plates/Cyclone_fullPlate.stl
index 1b750e9..406cc7f 100644
Binary files a/Output_files/STL_plates/Cyclone_fullPlate.stl and b/Output_files/STL_plates/Cyclone_fullPlate.stl differ
diff --git a/Output_files/STL_plates/README.md b/Output_files/STL_plates/README.md
index 2a78d5e..a59a2ba 100644
--- a/Output_files/STL_plates/README.md
+++ b/Output_files/STL_plates/README.md
@@ -1,8 +1,9 @@
 
-Last updated: September 17th 2014
+Last updated: September 26th 2015
 ---
 This plate can serve as a reference on how to print the parts.  
-You can also open the STL with [Cura](http://wiki.ultimaker.com/Cura) and use the option "split into parts" to easily arrange your own plates.  
+You can also open the STL with [Cura](http://wiki.ultimaker.com/Cura) and use the option "split into parts" to easily re-arrange your own plates.  
+In fact, this plate was generated from [the fully assembled STL](../templates/Cyclone.stl).  
 
 Tested Cura slicing settings:  
 
@@ -11,7 +12,7 @@ Tested Cura slicing settings:
 	Layer height: 0.25 mm
 	Shell thickness: 1.2 mm
 	Bottom/Top thickness: 1 mm
-	Fill density: 15 %
+	Fill density: 20 %
 	Print speed: 60 mm/s
 	Printing temperature: 210 deg
-	
+