diff --git a/Hardware/CYCLONE_2/Cyclone.scad b/Hardware/CYCLONE_2/Cyclone.scad
index 14b740c..d6ade70 100644
--- a/Hardware/CYCLONE_2/Cyclone.scad
+++ b/Hardware/CYCLONE_2/Cyclone.scad
@@ -44,9 +44,9 @@ axes_Xsmooth_rodD	= 8.5+animatePart(4,dist=5);
 axes_Ysmooth_rodD	= 8.5+animatePart(4,dist=5);
 axes_Zsmooth_rodD	= 8.5+animatePart(4,dist=5);
 
-axes_Xthreaded_rodD	= 8+animatePart(4,dist=5);
-axes_Ythreaded_rodD	= 8+animatePart(4,dist=5);
-axes_Zthreaded_rodD	= 8+animatePart(4,dist=5);
+axes_Xthreaded_rodD	= 8.5+animatePart(4,dist=5);
+axes_Ythreaded_rodD	= 8.5+animatePart(4,dist=5);
+axes_Zthreaded_rodD	= 8.5+animatePart(4,dist=5);
 
 // Parameters for the axes reference position
 // Note: The reference coordinates are centered like this:
@@ -62,7 +62,7 @@ axes_Zreference_posY	= 15; // relative to X reference. Positions Z nut between t
 
 axes_Y_threaded_height = 30+animatePart(5);
 
-axes_Ysmooth_separation	= 180-15+animatePart(1,overlap=0);
+axes_Ysmooth_separation	= 165+animatePart(1,overlap=0);
 axes_Xsmooth_separation = 40+animatePart(9);
 axes_Zsmooth_separation = 35+animatePart(10,overlap=0);
 
@@ -74,6 +74,16 @@ axes_Zcarriage_pos = axes_Zsmooth_rodLen/3+sin($t*360)*axes_Zsmooth_rodLen/4;
 
 
 
+
+// Parameters for the workbed
+Ycarriage_linearBearingSeparation = 50;
+workbed_size_X			= axes_Ysmooth_separation+50;
+workbed_size_Y			= Ycarriage_linearBearingSeparation+70;
+workbed_thickness		= 8;
+workbed_separation_from_Y_smooth_rod = 10;
+
+
+
 // Calculations
 axes_Xreference_posX	= (axes_Ysmooth_separation-axes_Xsmooth_rodLen)/2; // relative to Y reference
 axes_Y_smoothThreaded_verticalSeparation = axes_Yreference_height-axes_Y_threaded_height;
diff --git a/Hardware/CYCLONE_2/Cyclone_Y_carriage.scad b/Hardware/CYCLONE_2/Cyclone_Y_carriage.scad
index fe34b49..50894cb 100644
--- a/Hardware/CYCLONE_2/Cyclone_Y_carriage.scad
+++ b/Hardware/CYCLONE_2/Cyclone_Y_carriage.scad
@@ -5,18 +5,27 @@
 // Designed with http://www.openscad.org/
 
 
-Ycarriage_linearBearingSeparation = 35;
-
-
 module Cyclone_YsubPart_nutHolder() {
-	
+	workbed_separation_from_Y_threaded_rod = axes_Y_smoothThreaded_verticalSeparation+workbed_separation_from_Y_smooth_rod+axes_Ysmooth_rodD/2;
+	footThickness = 10;
+	screwSeparation = 14;
+	dimX = 15;
+	dimY = screwSeparation*2;
+	dimZ = workbed_separation_from_Y_threaded_rod+10;
+	#translate([-10,-dimY/2,-10])
+		cube([dimX,dimY,dimZ]);
+	translate([0,-screwSeparation/2,workbed_separation_from_Y_threaded_rod+workbed_thickness])
+		rotate([90,0,0])
+			hole_for_screw(size=3,length=workbed_thickness+footThickness,nutDepth=-dimZ,nutAddedLen=dimZ,captiveLen=0);
+	translate([0,+screwSeparation/2,workbed_separation_from_Y_threaded_rod+workbed_thickness])
+		rotate([90,0,0])
+			hole_for_screw(size=3,length=workbed_thickness+footThickness,nutDepth=-dimZ,nutAddedLen=dimZ,captiveLen=0);
 }
 
 module Cyclone_Y_carriage() {
-	baseHeight = 10;
+	baseHeight = workbed_separation_from_Y_smooth_rod-1;
 	color("lightgreen") {
-		translate([-10,-5,-5])
-			cube([20,15,axes_Y_smoothThreaded_verticalSeparation+10+baseHeight]);
+		Cyclone_YsubPart_nutHolder();
 		translate([0,0,axes_Y_smoothThreaded_verticalSeparation+baseHeight/2]) {
 			translate([axes_Ysmooth_separation/2,Ycarriage_linearBearingSeparation/2])
 				cube([10,10,10+baseHeight], center=true);
@@ -29,7 +38,7 @@ module Cyclone_Y_carriage() {
 		}
 	}
 	
-	*translate([0,0,8+5+axes_Y_smoothThreaded_verticalSeparation+baseHeight])
-		beveledBase(size=[axes_Ysmooth_separation+50,Ycarriage_linearBearingSeparation+100,8], radius=3, res=15, echoPart=true);
+	color([0.9,0.8,0.8,0.5]) translate([0,0,8+5+axes_Y_smoothThreaded_verticalSeparation+baseHeight])
+		beveledBase(size=[workbed_size_X,workbed_size_Y,workbed_thickness], radius=3, res=15, echoPart=true);
 }