Add missing files
Arne Durr
parent
7d6cfae157
commit
a88ea5be1f
|
|
@ -0,0 +1,240 @@
|
|||
// This file is part of Cyclone PCB Factory: an open-source 3D printable CNC machine for PCB manufacture
|
||||
// http://reprap.org/wiki/Cyclone_PCB_Factory
|
||||
// Original author: Carlosgs (http://carlosgs.es)
|
||||
// License: CC BY-SA 4.0 (Attribution-ShareAlike 4.0 International, http://creativecommons.org/licenses/by-sa/4.0/)
|
||||
// Designed with http://www.openscad.org/
|
||||
|
||||
// Default machine config file
|
||||
|
||||
|
||||
// --- Size parameters ---
|
||||
|
||||
// --- Bottom base ---
|
||||
base_size_X = 304.8 + animatePart(1,overlap=0);
|
||||
base_size_Y = 261.62 + animatePart(2);
|
||||
base_thickness = 8;
|
||||
base_corner_radius = 20;
|
||||
base_corner_res = 0;
|
||||
foot_offset = 25;
|
||||
|
||||
// --- Axes reference position ---
|
||||
// Note: The reference coordinates are centred like this:
|
||||
// Y axis reference is the Y smooth rod end, BACK of RIGHT FRAME
|
||||
// X axis reference is the frontal X smooth rod end, RIGHT FRAME
|
||||
// Z axis reference is the Z threaded rod, at the height of the Z nut, and relative to the X reference
|
||||
axes_Yreference_height = 40 + animatePart(5);
|
||||
axes_Xreference_height = 74 + animatePart(6); // relative to Y reference
|
||||
axes_Zreference_height = -3 + animatePart(7) + animatePart(9); // relative to X reference
|
||||
|
||||
axes_Xreference_posY = -81-animatePart(8)-animatePart(9); // relative to Y reference. Moves the X axis towards the front of the machine
|
||||
axes_Zreference_posY = 14; // relative to X reference. Positions Z rods between the Y rods
|
||||
|
||||
axes_Y_threaded_height = 30 + animatePart(5);
|
||||
|
||||
axes_Ysmooth_separation = 165 + animatePart(1,overlap=0);
|
||||
axes_Xsmooth_separation = 40 + animatePart(9);
|
||||
axes_Zsmooth_separation = 40 + animatePart(10,overlap=0);
|
||||
|
||||
|
||||
// --- Work bed ---
|
||||
Ycarriage_linearBearingSeparation = 50;
|
||||
workbed_size_X = axes_Ysmooth_separation+50;
|
||||
workbed_size_Y = Ycarriage_linearBearingSeparation+70;
|
||||
workbed_thickness = 8+3;
|
||||
workbed_separation_from_Y_smooth_rod = 10;
|
||||
PCBholder_height = 10;
|
||||
PCB_dimX = 160;
|
||||
PCB_dimY = 100;
|
||||
PCB_dimZ = 1.6;
|
||||
PCB_holder_edge_length = 3;
|
||||
|
||||
// --- Z carriage ---
|
||||
Z_carriage_wall_thickness = 9;
|
||||
Z_carriage_wall_width = 54;
|
||||
|
||||
// --- X frames ---
|
||||
X_frames_additional_thickness = 5;
|
||||
X_frame_footThickness = 10;
|
||||
X_frame_corner_radius = 10;
|
||||
X_frame_FrontalThickness = 15;
|
||||
X_backlash_armThickness = 30;
|
||||
X_motorWallSeparation = 5;
|
||||
X_motorRotatedOffset = 5;
|
||||
X_gearWallSeparation = 5;
|
||||
|
||||
// --- Y frames ---
|
||||
Y_frame_footThickness = 10;
|
||||
Y_motorWallSeparation = 5;
|
||||
Y_motorRotatedOffset = 5;
|
||||
Y_gearWallSeparation = 5;
|
||||
Y_foot_additional_separation = 5;
|
||||
Y_endstopHolderRotation = 5;
|
||||
Logo = true; // Add logo to the Y Smooth Rod Idlers
|
||||
|
||||
// --- Axes sizes ---
|
||||
// *_rodLen = length
|
||||
// *_rodD = diameter
|
||||
// Y smooth rod
|
||||
axes_Ysmooth_rodLen = 210 + animatePart(2);
|
||||
axes_Ysmooth_rodD = 8.5 + animatePart(4,dist=5);
|
||||
// Y threaded rod
|
||||
axes_Ythreaded_rodLen = axes_Ysmooth_rodLen-10;
|
||||
axes_Ythreaded_rodD = 8.5 + animatePart(4,dist=5);
|
||||
// X smooth rod
|
||||
axes_Xsmooth_rodLen = 250 + animatePart(1,overlap=0);
|
||||
axes_Xsmooth_rodD = 8.5 + animatePart(4,dist=5);
|
||||
// X threaded rod
|
||||
axes_Xthreaded_rodLen = axes_Xsmooth_rodLen+50;
|
||||
axes_Xthreaded_rodD = 8.5 + animatePart(4,dist=5);
|
||||
// Z smooth rod
|
||||
axes_Zsmooth_rodLen = 110 + animatePart(3);
|
||||
axes_Zsmooth_rodD = 8.2 + animatePart(4,dist=5);
|
||||
// Z threaded rod
|
||||
axes_Zthreaded_rodLen = 90;
|
||||
axes_Zthreaded_rodD = 8.5 + animatePart(4,dist=5);
|
||||
|
||||
// --- Bearings ---
|
||||
Y_linearBearingModel = "LM8UU";
|
||||
X_linearBearingModel = "LM8UU";
|
||||
X_linearBearingSeparation = 0;
|
||||
X_threaded_rod_bearingDepth = 3;
|
||||
Z_linearBearingModel = "LM8UU";
|
||||
Z_threaded_rodBearingModel = 608;
|
||||
Y_threaded_rodBearingModel = 608;
|
||||
Y_threaded_rodBearingDepth = 3;
|
||||
|
||||
// --- Steppers ---
|
||||
//Y_motorModel = Nema17;
|
||||
//X_motorModel = Nema17;
|
||||
//Z_motorModel = Nema17;
|
||||
Z_motor_adjust_margin = 5;
|
||||
|
||||
// --- Screw sizes ---
|
||||
// M3, M4, etc (integers only), at the moment only M3 and M4 will work.
|
||||
Y_frontFrame_footScrewSize = 3;
|
||||
Y_backFrame_footScrewSize = 3;
|
||||
Y_rightSmoothRodIdler_footScrewSize = 3;
|
||||
X_Frame_footScrewSize = 3;
|
||||
|
||||
Y_threaded_rodNutSize = 8;
|
||||
X_threaded_rodNutSize = 8;
|
||||
Z_threaded_rodNutSize = 8;
|
||||
|
||||
Y_nutHolder_screwSize = 3;
|
||||
Y_singleLinearBearingHolder_screwSize = 3;
|
||||
Y_PCBholder_screwSize = 3;
|
||||
|
||||
Y_backlash_washer_D = 15.8;
|
||||
Y_backlash_washer_thickness = 1.6;
|
||||
X_backlash_washer_D = 15.8-0.5;
|
||||
X_backlash_washer_thickness = 1.6-0.9;
|
||||
|
||||
X_carriage_screwSize = 3;
|
||||
|
||||
Y_rightSmoothRodIdler_rodScrewSize = 3;
|
||||
X_Frame_rodScrewSize = 3;
|
||||
|
||||
spindle_holder_screwSize = 3;
|
||||
|
||||
// --- Gears ---
|
||||
axes_XgearSeparation = 37;
|
||||
X_rodGearRatio = 21; // Number of tooth
|
||||
X_motorGearRatio = 21; // Number of tooth
|
||||
X_gear_thickness = 10;
|
||||
Z_rodGearRatio = 15; // Number of tooth
|
||||
Z_motorGearRatio = 8; // Number of tooth
|
||||
Z_gear_thickness = 10;
|
||||
axes_YgearSeparation = 37;
|
||||
Y_rodGearRatio = 21; // Number of tooth
|
||||
Y_motorGearRatio = 21; // Number of tooth
|
||||
Y_gear_thickness = 5;
|
||||
|
||||
// --- Gear Cover ---
|
||||
gearCover_margin = 4;
|
||||
rodGearAddedgearCover_margin = 0;
|
||||
gearCover_wallThickness = 0.4*4;
|
||||
gearCover_screwHeadSpaceHeight = 4;
|
||||
gearCover_screwHeadSpaceDiam = 6;
|
||||
gearCoverHeight = 16;
|
||||
gearCoverExtraHeight = 5;
|
||||
gearCoverExtraRadius = -7;
|
||||
gearCover_truncationAngle = 10;
|
||||
|
||||
// --- Spindle Motor ---
|
||||
spindle_motor_diam_top = 51.3;
|
||||
spindle_motor_diam_top_smaller = 47.5;
|
||||
spindle_motor_diam = 47.5;
|
||||
spindle_motor_sidelen = 32;
|
||||
spindle_holder_thickness = 8;
|
||||
spindle_motor_length = 90;
|
||||
|
||||
// --- Text ---
|
||||
textHscale = 0.8;
|
||||
textThickness = 1.5;
|
||||
topText = "CYCLONE";
|
||||
bottomText = "PCB Factory";
|
||||
|
||||
// --- Tolerances ---
|
||||
Y_threaded_rod_Tolerance = 0.5;
|
||||
Y_linearBearing_pressureFitTolerance = 0.5;
|
||||
PCB_holder_tolerance = 1;
|
||||
axes_Xsmooth_separation_tolerance = 0.5;
|
||||
X_threaded_rod_Tolerance = 0.5;
|
||||
Z_linearBearingHole_tolerance = 0.5;
|
||||
LinearBearingPressureFitTolerance = 0.4;
|
||||
screwHoleTolerance = 0.4;
|
||||
|
||||
Z_threaded_rod_Tolerance = 0.5;
|
||||
|
||||
|
||||
// --- Render options ---
|
||||
|
||||
// --- Part colours ---
|
||||
blueColor = [0.3,0.6,0.9];
|
||||
redColor = [0.8,0.3,0.3];
|
||||
yellowColor = [0.9,0.9,0.1];
|
||||
blackColor = [0.2,0.2,0.2];
|
||||
color_movingPart = yellowColor+[0.1,0.1,0.1];
|
||||
color_stillPart = yellowColor;
|
||||
|
||||
// --- DXF output ---
|
||||
// Activate/Deactivate rendering auxiliary references (LCS axis, etc)
|
||||
draw_references = false; // Show reference axis's
|
||||
render_DXF_base = false; // Render bottom base for DXF export
|
||||
render_DXF_workbed = false; // Render work bed for DXF export
|
||||
render_bases_outline = false; //Toggle for rendering outline DXFs
|
||||
DXF_offset = 0.4; //Needed to adjust the tolerance of the laser cutter
|
||||
|
||||
// --- Carriage positions ---
|
||||
axes_Xcarriage_pos = axes_Xsmooth_rodLen/2+sin($t*360)*axes_Xsmooth_rodLen/3;
|
||||
axes_Ycarriage_pos = axes_Ysmooth_rodLen/2+sin($t*360)*axes_Ysmooth_rodLen/4.1;
|
||||
axes_Zcarriage_pos = axes_Zsmooth_rodLen/2+sin($t*360)*axes_Zsmooth_rodLen/8;
|
||||
|
||||
// --- Parts ---
|
||||
Render_X_leftFrame = true;
|
||||
Render_X_rightFrame = true;
|
||||
Render_X_carriage = true;
|
||||
Render_Z_carriage = true;
|
||||
Render_Z_carriageTop = true;
|
||||
Render_Z_carriageBottom = true;
|
||||
Render_Y_leftSmoothRodIdler = true;
|
||||
Render_Y_rightSmoothRodIdler = true;
|
||||
Render_Y_frontFrame = true;
|
||||
Render_Y_backFrame = true;
|
||||
Render_Y_carriage = true;
|
||||
Render_control_board = true;
|
||||
Render_Y_gearCover = true;
|
||||
Render_Y_motorGear = true;
|
||||
Render_Y_rodGear = true;
|
||||
Render_X_gearCover = true;
|
||||
Render_X_motorGear = true;
|
||||
Render_X_rodGear = true;
|
||||
Render_PCBholderTop = true;
|
||||
Render_PCBholderBottom = true;
|
||||
Render_YsubPart_linearBearingHolders = true;
|
||||
Render_YsubPart_nutHolder = true;
|
||||
//Render_rodHolder = true;
|
||||
|
||||
alt_XZ_carriage = false;
|
||||
|
||||
|
||||
|
|
@ -0,0 +1,237 @@
|
|||
// This file is part of Cyclone PCB Factory: an open-source 3D printable CNC machine for PCB manufacture
|
||||
// http://reprap.org/wiki/Cyclone_PCB_Factory
|
||||
// Original author: Carlosgs (http://carlosgs.es)
|
||||
// License: CC BY-SA 4.0 (Attribution-ShareAlike 4.0 International, http://creativecommons.org/licenses/by-sa/4.0/)
|
||||
// Designed with http://www.openscad.org/
|
||||
|
||||
// Default machine config file
|
||||
|
||||
|
||||
// --- Size parameters ---
|
||||
|
||||
// --- Bottom base ---
|
||||
base_size_X = 304.8 + animatePart(1,overlap=0);
|
||||
base_size_Y = 261.62 + animatePart(2);
|
||||
base_thickness = 8;
|
||||
base_corner_radius = 20;
|
||||
base_corner_res = 0;
|
||||
foot_offset = 25;
|
||||
|
||||
// --- Axes reference position ---
|
||||
// Note: The reference coordinates are centred like this:
|
||||
// Y axis reference is the Y smooth rod end, BACK of RIGHT FRAME
|
||||
// X axis reference is the frontal X smooth rod end, RIGHT FRAME
|
||||
// Z axis reference is the Z threaded rod, at the height of the Z nut, and relative to the X reference
|
||||
axes_Yreference_height = 40 + animatePart(5);
|
||||
axes_Xreference_height = 74 + animatePart(6); // relative to Y reference
|
||||
axes_Zreference_height = -3 + animatePart(7) + animatePart(9); // relative to X reference
|
||||
|
||||
axes_Xreference_posY = -81-animatePart(8)-animatePart(9); // relative to Y reference. Moves the X axis towards the front of the machine
|
||||
axes_Zreference_posY = 14; // relative to X reference. Positions Z rods between the Y rods
|
||||
|
||||
axes_Y_threaded_height = 30 + animatePart(5);
|
||||
|
||||
axes_Ysmooth_separation = 165 + animatePart(1,overlap=0);
|
||||
axes_Xsmooth_separation = 40 + animatePart(9);
|
||||
axes_Zsmooth_separation = 40 + animatePart(10,overlap=0);
|
||||
|
||||
|
||||
// --- Work bed ---
|
||||
Ycarriage_linearBearingSeparation = 50;
|
||||
workbed_size_X = axes_Ysmooth_separation+50;
|
||||
workbed_size_Y = Ycarriage_linearBearingSeparation+70;
|
||||
workbed_thickness = 8+3;
|
||||
workbed_separation_from_Y_smooth_rod = 10;
|
||||
PCBholder_height = 10;
|
||||
PCB_dimX = 160;
|
||||
PCB_dimY = 100;
|
||||
PCB_dimZ = 1.6;
|
||||
PCB_holder_edge_length = 3;
|
||||
|
||||
// --- Z carriage ---
|
||||
Z_carriage_wall_thickness = 9;
|
||||
Z_carriage_wall_width = 54;
|
||||
|
||||
// --- X frames ---
|
||||
X_frames_additional_thickness = 5;
|
||||
X_frame_footThickness = 10;
|
||||
X_frame_corner_radius = 10;
|
||||
X_frame_FrontalThickness = 15;
|
||||
X_backlash_armThickness = 30;
|
||||
X_motorWallSeparation = 5;
|
||||
X_motorRotatedOffset = 5;
|
||||
X_gearWallSeparation = 5;
|
||||
|
||||
// --- Y frames ---
|
||||
Y_frame_footThickness = 10;
|
||||
Y_motorWallSeparation = 5;
|
||||
Y_motorRotatedOffset = 5;
|
||||
Y_gearWallSeparation = 5;
|
||||
Y_foot_additional_separation = 5;
|
||||
Y_endstopHolderRotation = 5;
|
||||
Logo = true; // Add logo to the Y Smooth Rod Idlers
|
||||
|
||||
// --- Axes sizes ---
|
||||
// *_rodLen = length
|
||||
// *_rodD = diameter
|
||||
// Y smooth rod
|
||||
axes_Ysmooth_rodLen = 233 + animatePart(2);
|
||||
axes_Ysmooth_rodD = 8.5 + animatePart(4,dist=5);
|
||||
// Y threaded rod
|
||||
axes_Ythreaded_rodLen = axes_Ysmooth_rodLen-10;
|
||||
axes_Ythreaded_rodD = 8.5 + animatePart(4,dist=5);
|
||||
// X smooth rod
|
||||
axes_Xsmooth_rodLen = 300 + animatePart(1,overlap=0);
|
||||
axes_Xsmooth_rodD = 8.5 + animatePart(4,dist=5);
|
||||
// X threaded rod
|
||||
axes_Xthreaded_rodLen = axes_Xsmooth_rodLen+50;
|
||||
axes_Xthreaded_rodD = 8.5 + animatePart(4,dist=5);
|
||||
// Z smooth rod
|
||||
axes_Zsmooth_rodLen = 200 + animatePart(3);
|
||||
axes_Zsmooth_rodD = 8.2 + animatePart(4,dist=5);
|
||||
// Z threaded rod
|
||||
axes_Zthreaded_rodLen = axes_Zsmooth_rodLen-20;
|
||||
axes_Zthreaded_rodD = 8.5 + animatePart(4,dist=5);
|
||||
|
||||
// --- Bearings ---
|
||||
Y_linearBearingModel = "LM8UU";
|
||||
X_linearBearingModel = "LM8UU";
|
||||
X_linearBearingSeparation = 0;
|
||||
X_threaded_rod_bearingDepth = 3;
|
||||
Z_linearBearingModel = "LM8UU";
|
||||
Z_threaded_rodBearingModel = 608;
|
||||
Y_threaded_rodBearingModel = 608;
|
||||
Y_threaded_rodBearingDepth = 3;
|
||||
|
||||
// --- Steppers ---
|
||||
//Y_motorModel = Nema17;
|
||||
//X_motorModel = Nema17;
|
||||
//Z_motorModel = Nema17;
|
||||
Z_motor_adjust_margin = 5;
|
||||
|
||||
// --- Screw sizes ---
|
||||
// M3, M4, etc (integers only), at the moment only M3 and M4 will work.
|
||||
Y_frontFrame_footScrewSize = 4;
|
||||
Y_backFrame_footScrewSize = 4;
|
||||
Y_rightSmoothRodIdler_footScrewSize = 4;
|
||||
X_Frame_footScrewSize = 4;
|
||||
|
||||
Y_threaded_rodNutSize = 8;
|
||||
X_threaded_rodNutSize = 8;
|
||||
Z_threaded_rodNutSize = 8;
|
||||
|
||||
Y_nutHolder_screwSize = 4;
|
||||
Y_singleLinearBearingHolder_screwSize = 4;
|
||||
Y_PCBholder_screwSize = 4;
|
||||
|
||||
Y_backlash_washer_D = 15.8;
|
||||
Y_backlash_washer_thickness = 1.6;
|
||||
X_backlash_washer_D = 15.8-0.5;
|
||||
X_backlash_washer_thickness = 1.6-0.9;
|
||||
|
||||
X_carriage_screwSize = 4;
|
||||
|
||||
Y_rightSmoothRodIdler_rodScrewSize = 4;
|
||||
X_Frame_rodScrewSize = 4;
|
||||
|
||||
spindle_holder_screwSize = 4;
|
||||
|
||||
// --- Gears ---
|
||||
axes_XgearSeparation = 37;
|
||||
X_rodGearRatio = 21; // Number of tooth
|
||||
X_motorGearRatio = 21; // Number of tooth
|
||||
X_gear_thickness = 10;
|
||||
Z_rodGearRatio = 15; // Number of tooth
|
||||
Z_motorGearRatio = 8; // Number of tooth
|
||||
Z_gear_thickness = 10;
|
||||
axes_YgearSeparation = 37;
|
||||
Y_rodGearRatio = 21; // Number of tooth
|
||||
Y_motorGearRatio = 21; // Number of tooth
|
||||
Y_gear_thickness = 5;
|
||||
|
||||
// --- Gear Cover ---
|
||||
gearCover_margin = 4;
|
||||
rodGearAddedgearCover_margin = 0;
|
||||
gearCover_wallThickness = 0.4*4;
|
||||
gearCover_screwHeadSpaceHeight = 4;
|
||||
gearCover_screwHeadSpaceDiam = 6;
|
||||
gearCoverHeight = 16;
|
||||
gearCoverExtraHeight = 5;
|
||||
gearCoverExtraRadius = -7;
|
||||
gearCover_truncationAngle = 10;
|
||||
|
||||
// --- Spindle Motor ---
|
||||
spindle_motor_diam_top = 51.3;
|
||||
spindle_motor_diam_top_smaller = 47.5;
|
||||
spindle_motor_diam = 47.5;
|
||||
spindle_motor_sidelen = 32;
|
||||
spindle_holder_thickness = 8;
|
||||
spindle_motor_length = 90;
|
||||
|
||||
// --- Text ---
|
||||
textHscale = 0.8;
|
||||
textThickness = 1.5;
|
||||
topText = "CYCLONE";
|
||||
bottomText = "PCB Factory";
|
||||
|
||||
// --- Tolerances ---
|
||||
Y_threaded_rod_Tolerance = 0.5;
|
||||
Y_linearBearing_pressureFitTolerance = 0.1;
|
||||
PCB_holder_tolerance = 1;
|
||||
axes_Xsmooth_separation_tolerance = 0.5;
|
||||
X_threaded_rod_Tolerance = 0.5;
|
||||
Z_linearBearingHole_tolerance = 0.1;
|
||||
LinearBearingPressureFitTolerance = 0.1;
|
||||
screwHoleTolerance = 0.04;
|
||||
|
||||
|
||||
// --- Render options ---
|
||||
|
||||
// --- Part colours ---
|
||||
blueColor = [0.3,0.6,0.9];
|
||||
redColor = [0.8,0.3,0.3];
|
||||
yellowColor = [0.9,0.9,0.1];
|
||||
blackColor = [0.2,0.2,0.2];
|
||||
color_movingPart = yellowColor+[0.1,0.1,0.1];
|
||||
color_stillPart = yellowColor;
|
||||
|
||||
// --- DXF output ---
|
||||
// Activate/Deactivate rendering auxiliary references (LCS axis, etc)
|
||||
draw_references = false; // Show reference axis's
|
||||
render_DXF_base = false; // Render bottom base for DXF export
|
||||
render_DXF_workbed = false; // Render work bed for DXF export
|
||||
render_bases_outline = false; //Toggle for rendering outline DXFs
|
||||
DXF_offset = 0.4; //Needed to adjust the tolerance of the laser cutter
|
||||
|
||||
// --- Carriage positions ---
|
||||
axes_Xcarriage_pos = axes_Xsmooth_rodLen/2+sin($t*360)*axes_Xsmooth_rodLen/3;
|
||||
axes_Ycarriage_pos = axes_Ysmooth_rodLen/2+sin($t*360)*axes_Ysmooth_rodLen/4.1;
|
||||
axes_Zcarriage_pos = axes_Zsmooth_rodLen/2+sin($t*360)*axes_Zsmooth_rodLen/8;
|
||||
|
||||
// --- Parts ---
|
||||
Render_X_leftFrame = true;
|
||||
Render_X_rightFrame = true;
|
||||
Render_X_carriage = true;
|
||||
Render_Z_carriage = true;
|
||||
Render_Z_carriageTop = true;
|
||||
Render_Z_carriageBottom = true;
|
||||
Render_Y_leftSmoothRodIdler = true;
|
||||
Render_Y_rightSmoothRodIdler = true;
|
||||
Render_Y_frontFrame = true;
|
||||
Render_Y_backFrame = true;
|
||||
Render_Y_carriage = true;
|
||||
Render_control_board = true;
|
||||
Render_Y_gearCover = true;
|
||||
Render_Y_motorGear = true;
|
||||
Render_Y_rodGear = true;
|
||||
Render_X_gearCover = true;
|
||||
Render_X_motorGear = true;
|
||||
Render_X_rodGear = true;
|
||||
Render_PCBholderTop = true;
|
||||
Render_PCBholderBottom = true;
|
||||
Render_YsubPart_linearBearingHolders = true;
|
||||
Render_YsubPart_nutHolder = true;
|
||||
//Render_rodHolder = true;
|
||||
|
||||
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,379 @@
|
|||
/* Version 3
|
||||
Added support for font selection (default is Letters.dxf)
|
||||
Added WriteCube module
|
||||
Added Rotate for text (rotates on the plane of the text)
|
||||
Added writesphere
|
||||
Added space= (spacing between characters in char widths) def=1
|
||||
Added writecylinder()
|
||||
|
||||
By Harlan Martin
|
||||
harlan@sutlog.com
|
||||
January 2012
|
||||
|
||||
(The file TestWrite.scad gives More usage examples)
|
||||
(This module requires the file Letters.dxf to reside in the same folder)
|
||||
(The file Letters.dfx was created with inkscape..Each letter is in its own layer)
|
||||
(This module seperates each letter in the string and imports it from Letters.dfx)
|
||||
|
||||
*/
|
||||
|
||||
pi=3.1415926535897932384626433832795028841971693993751058209;
|
||||
pi2=pi*2;
|
||||
|
||||
|
||||
// These control the default values for write() writesphere() writecube()
|
||||
// if the parameters are not included in the call. Feel free to set your own
|
||||
// defaults.
|
||||
|
||||
//default settings
|
||||
center=false;
|
||||
h = 4; //mm letter height
|
||||
t = 1; //mm letter thickness
|
||||
space =1; //extra space between characters in (character widths)
|
||||
rotate=0; // text rotation (clockwise)
|
||||
font = "Letters.dxf"; //default for aditional fonts
|
||||
fontPath = "./"; // CGS MOD: Path for the DXF font files
|
||||
|
||||
|
||||
// write cube defaults
|
||||
face = "front"; // default face (top,bottom,left,right,back,front)
|
||||
up =0; //mm up from center on face of cube
|
||||
down=0;
|
||||
right =0; //mm left from center on face of cube
|
||||
left=0;
|
||||
|
||||
|
||||
// write sphere defaults
|
||||
rounded=false; //default for rounded letters on writesphere
|
||||
north=0; // intial text position (I suggest leave these 0 defaults)
|
||||
south=0;
|
||||
east=0;
|
||||
west=0;
|
||||
spin=0;
|
||||
// writecylinder defaults
|
||||
middle=0; //(mm toward middle of circle)
|
||||
ccw=false; //write on top or bottom in a ccw direction
|
||||
r1=0; //(not implimented yet)
|
||||
r2=0; //(not implimented yet)
|
||||
|
||||
|
||||
|
||||
// Contact me if your interested in how to make your own font files
|
||||
// Its tedious and time consuming, but not very hard
|
||||
|
||||
|
||||
module writecylinder(text,where,radius,height){
|
||||
wid=(.125* h *5.5 * space);
|
||||
widall=wid*(len(text)-1)/2;
|
||||
//angle that measures width of letters on sphere
|
||||
function NAngle(radius)=(wid/(pi2*radius))*360;
|
||||
//angle of half width of text
|
||||
function mmangle(radius)=(widall/(pi2*radius)*360);
|
||||
|
||||
if ((face=="top")||(face=="bottom") ){
|
||||
if (face=="top" ){
|
||||
if (center==true){
|
||||
writecircle(text,where+[0,0,height/2],radius-h,rotate=rotate,font=font,h=h,t=t,
|
||||
space=space,east=east,west=west,middle=middle,ccw=ccw);
|
||||
}else{
|
||||
writecircle(text,where+[0,0,height],radius-h,rotate=rotate,font=font,h=h,t=t,
|
||||
space=space,east=east,west=west,middle=middle,ccw=ccw);
|
||||
}
|
||||
}else{
|
||||
rotate(180,[1,0,0])
|
||||
if (center==true){
|
||||
writecircle(text,where+[0,0,height/2],radius-h,rotate=rotate,font=font,h=h,t=t,
|
||||
space=space,east=east,west=west,middle=middle,ccw=ccw);
|
||||
}else{
|
||||
writecircle(text,where+[0,0,0],radius-h,rotate=rotate,font=font,h=h,t=t,
|
||||
space=space,east=east,west=west,middle=middle,ccw=ccw);
|
||||
}
|
||||
}
|
||||
|
||||
}else{
|
||||
// if (radius>0){
|
||||
if (center==true) {
|
||||
rotate(-mmangle(radius)*(1-abs(rotate)/90),[0,0,1])
|
||||
translate(where)
|
||||
writethecylinder(text,where,radius,height,r1=radius,r2=radius,h=h,
|
||||
rotate=rotate,t=t,font=font,face=face,up=up,down=down,
|
||||
east=east,west=west,center=center,space=space,rounded=rounded);
|
||||
} else{
|
||||
rotate(-mmangle(radius)*(1-abs(rotate)/90),[0,0,1])
|
||||
translate(where+[0,0,height/2])
|
||||
writethecylinder(text,where,radius,height,r1=radius,r2=radius,h=h,
|
||||
rotate=rotate,t=t,font=font,face=face,up=up,down=down,
|
||||
east=east,west=west,center=center,space=space,rounded=rounded);
|
||||
}
|
||||
// the remarked out code is for cone shaped cylinders (not complete)
|
||||
// }else{
|
||||
// if (center==true) {
|
||||
// rotate(-mmangle(radius)*(1-abs(rotate)/90),[0,0,1])
|
||||
// translate(where)
|
||||
// writethecylinder(text,where,radius,height,r1=r1,r2=r2,h=h,
|
||||
// rotate=rotate,t=t,font=font,face=face,up=up,down=down,
|
||||
// east=east,west=west,center=center,space=space,rounded=rounded);
|
||||
// } else{
|
||||
// rotate(-mmangle(radius)*(1-abs(rotate)/90),[0,0,1])
|
||||
// translate(where+[0,0,height/2])
|
||||
// writethecylinder(text,where,radius,height,r1=r1,r2=r2,h=h,
|
||||
// rotate=rotate,t=t,font=font,face=face,up=up,down=down,
|
||||
// east=east,west=west,center=center,space=space,rounded=rounded);
|
||||
// }
|
||||
// }
|
||||
}
|
||||
}
|
||||
module writecircle(text,where,radius){
|
||||
wid=(.125* h *5.5 * space);
|
||||
widall=wid*(len(text)-1)/2;
|
||||
//angle that measures width of letters on sphere
|
||||
function NAngle(radius)=(wid/(pi2*radius))*360;
|
||||
//angle of half width of text
|
||||
function mmangle(radius)=(widall/(pi2*radius)*360);
|
||||
|
||||
if (ccw==true){
|
||||
rotate(-rotate+east-west,[0,0,1]){
|
||||
rotate(-mmangle(radius-middle),[0,0,1]){
|
||||
translate(where)
|
||||
for (r=[0:len(text)-1]){
|
||||
rotate(-90+r*NAngle(radius-middle),[0,0,1]) // bottom out=-270+r
|
||||
translate([radius-middle,0,0])
|
||||
//rotate(90,[1,0,0])
|
||||
//rotate(90,[0,1,0])
|
||||
rotate(-270,[0,0,1]) // flip text (botom out = -270)
|
||||
write(text[r],center=true,h=h,t=t,font=font);
|
||||
}
|
||||
}
|
||||
}
|
||||
}else{
|
||||
rotate(-rotate-east+west,[0,0,1]){
|
||||
rotate(mmangle(radius-middle),[0,0,1]){
|
||||
translate(where)
|
||||
for (r=[0:len(text)-1]){
|
||||
rotate(90-r*NAngle(radius-middle),[0,0,1]) // bottom out=-270+r
|
||||
translate([radius-middle,0,0])
|
||||
//rotate(90,[1,0,0])
|
||||
//rotate(90,[0,1,0])
|
||||
rotate(270,[0,0,1]) // flip text (botom out = -270)
|
||||
write(text[r],center=true,h=h,t=t,font=font);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
}
|
||||
module writethecylinder(text,where,radius,height,r1,r2){
|
||||
wid=(.125* h *5.5 * space);
|
||||
widall=wid*(len(text)-1)/2;
|
||||
//angle that measures width of letters on sphere
|
||||
function NAngle(radius)=(wid/(pi2*radius))*360*(1-abs(rotate)/90);
|
||||
//angle of half width of text
|
||||
|
||||
function mmangle(radius)=(widall/(pi2*radius)*360);
|
||||
translate([0,0,up-down])
|
||||
rotate(east-west,[0,0,1])
|
||||
for (r=[0:len(text)-1]){
|
||||
rotate(-90+(r*NAngle(radius)),[0,0,1])
|
||||
translate([radius,0,-r*((rotate)/90*wid)+(len(text)-1)/2*((rotate)/90*wid)])
|
||||
rotate(90,[1,0,0])
|
||||
rotate(90,[0,1,0])
|
||||
write(text[r],center=true,h=h,rotate=rotate,t=t,font=font);
|
||||
//echo("zloc=",height/2-r*((rotate)/90*wid)+(len(text)-1)/2*((rotate)/90*wid));
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
|
||||
module writesphere(text,where,radius){
|
||||
wid=(.125* h *5.5 * space);
|
||||
widall=wid*(len(text)-1)/2;
|
||||
|
||||
echo("-----------------",widall,wid,mmangle(radius));
|
||||
//angle that measures width of letters on sphere
|
||||
function NAngle(radius)=(wid/(pi2*radius))*360;
|
||||
//angle of half width of text
|
||||
function mmangle(radius)=(widall/(pi2*radius)*360);
|
||||
|
||||
rotate(east-west,[0,0,1]){
|
||||
rotate(south-north,[1,0,0]){
|
||||
rotate(spin,[0,1,0]){
|
||||
rotate(-mmangle(radius),[0,0,1]){
|
||||
if ( rounded== false ){
|
||||
translate(where)
|
||||
for (r=[0:len(text)-1]){
|
||||
rotate(-90+r*NAngle(radius),[0,0,1])
|
||||
translate([radius,0,0])
|
||||
rotate(90,[1,0,0])
|
||||
rotate(90,[0,1,0])
|
||||
write(text[r],center=true,h=h,rotate=rotate,t=t,font=font);
|
||||
}
|
||||
}else{
|
||||
difference(){
|
||||
translate(where)
|
||||
for (r=[0:len(text)-1]){
|
||||
rotate(-90+r*NAngle(radius),[0,0,1])
|
||||
translate([radius,0,0])
|
||||
rotate(90,[1,0,0])
|
||||
rotate(90,[0,1,0])
|
||||
write(text[r],center=true,h=h,rotate=rotate,t=t*2+h,font=font);
|
||||
}
|
||||
difference(){ //rounded outside
|
||||
sphere(radius+(t*2+h)*2);
|
||||
sphere(radius+t/2);
|
||||
}
|
||||
sphere(radius-t/2); // rounded inside for indented text
|
||||
}
|
||||
}
|
||||
}
|
||||
}}}
|
||||
}
|
||||
|
||||
|
||||
module writecube(text,where,size){
|
||||
if (str(size)[0] != "["){
|
||||
// its a square cube (size was not a matrix so make it one)
|
||||
writethecube(text,where,[size,size,size],h=h,rotate=rotate,space=space,
|
||||
t=t,font=font,face=face,up=up,down=down,right=right,left=left);
|
||||
|
||||
}else{
|
||||
// its not square
|
||||
writethecube(text,where,size,h=h,rotate=rotate,space=space,
|
||||
t=t,font=font,face=face,up=up,down=down,right=right,left=left);
|
||||
}
|
||||
}
|
||||
// I split the writecube module into 2 pieces.. easier to add features later
|
||||
module writethecube(text,where,size){
|
||||
if (face=="front") {
|
||||
translate([where[0]+right-left,where[1]-size[1]/2,where[2]+up-down])
|
||||
rotate(90,[1,0,0])
|
||||
write(text,center=true,h=h,rotate=rotate,t=t,font=font);
|
||||
}
|
||||
if (face=="back") {
|
||||
translate([where[0]+right-left,where[1]+size[1]/2,where[2]+up-down])
|
||||
rotate(90,[1,0,0]) // rotate around the x axis
|
||||
rotate(180,[0,1,0]) // rotate around the y axis (z before rotation)
|
||||
write(text,center=true,h=h,rotate=rotate,t=t,font=font);
|
||||
}
|
||||
if (face=="left") {
|
||||
translate([where[0]-size[0]/2,where[1]-right+left,where[2]+up-down ])
|
||||
rotate(90,[1,0,0]) // rotate around the x axis
|
||||
rotate(90,[0,-1,0]) // rotate around the y axis (z before rotation)
|
||||
write(text,center=true,h=h,rotate=rotate,t=t,font=font);
|
||||
}
|
||||
if (face=="right") {
|
||||
translate([where[0]+size[0]/2,where[1]+right-left,where[2] +up-down])
|
||||
rotate(90,[1,0,0]) // rotate around the x axis
|
||||
rotate(90,[0,1,0]) // rotate around the y axis (z before rotation)
|
||||
write(text,center=true,h=h,rotate=rotate,t=t,font=font);
|
||||
}
|
||||
if (face=="top") {
|
||||
translate([where[0]+right-left,where[1]+up-down,where[2]+size[2]/2 ])
|
||||
write(text,center=true,h=h,rotate=rotate,t=t,font=font);
|
||||
}
|
||||
if (face=="bottom") {
|
||||
translate([where[0]+right-left,where[1]-up+down,where[2]-size[2]/2 ])
|
||||
rotate(180,[1,0,0])
|
||||
write(text,center=true,h=h,rotate=rotate,t=t,font=font);
|
||||
}
|
||||
}
|
||||
|
||||
module write(word){
|
||||
|
||||
echo (h);
|
||||
echo (word);
|
||||
echo ("There are " ,len(word) ," letters in this string");
|
||||
// echo ("The second letter is ",word[1]);
|
||||
// echo (str(word[0],"_"));
|
||||
rotate(rotate,[0,0,-1]){
|
||||
for (r = [0:len(word)]){ // count off each character
|
||||
// if the letter is lower case, add an underscore to the end for file lookup
|
||||
if ((word[r] == "a" ) || (word[r]== "b") || (word[r]== "c")
|
||||
|| (word[r]== "d") || (word[r]== "e") || (word[r]== "f")
|
||||
|| (word[r]== "g") || (word[r]== "h") || (word[r]== "i")
|
||||
|| (word[r]== "j") || (word[r]== "k") || (word[r]== "l")
|
||||
|| (word[r]== "m") || (word[r]== "n") || (word[r]== "o")
|
||||
|| (word[r]== "p") || (word[r]== "q") || (word[r]== "r")
|
||||
|| (word[r]== "s") || (word[r]== "t") || (word[r]== "u")
|
||||
|| (word[r]== "v") || (word[r]== "w") || (word[r]== "x")
|
||||
|| (word[r]== "y" )|| (word[r]== "z")){
|
||||
if (center == true) {
|
||||
translate([0,-h/2,0]){
|
||||
scale([.125*h,.125*h,t]){
|
||||
translate([ (-len(word)*5.5*space/2) + (r*5.5*space),0,0])
|
||||
linear_extrude(height=1,convexity=10,center=true){
|
||||
import(file = str(fontPath,font) ,layer=str(word[r],"_"));
|
||||
}
|
||||
}
|
||||
}
|
||||
}else{
|
||||
translate([0,0,t/2]){
|
||||
scale([.125*h,.125*h,t]){
|
||||
translate([r*5.5*space,0,0])
|
||||
linear_extrude(height=1,convexity=10,center=true){
|
||||
import(file = str(fontPath,font) ,layer=str(word[r],"_"));
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
}else{
|
||||
if (center == true) {
|
||||
translate([0,-h/2,0]){
|
||||
scale([.125*h,.125*h,t]){
|
||||
translate([ (-len(word)*5.5*space/2) + (r*5.5*space),0,0])
|
||||
linear_extrude(height=1,convexity=10,center=true){
|
||||
import(file = str(fontPath,font) ,layer=str(word[r]));
|
||||
}
|
||||
}
|
||||
}
|
||||
}else{
|
||||
translate([0,0,t/2]){
|
||||
scale([.125*h,.125*h,t]){
|
||||
translate([r*5.5*space,0,0])
|
||||
linear_extrude(height=1,convexity=10,center=true){
|
||||
import(file = str(fontPath,font) ,layer=str(word[r]));
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/*writecylinder test
|
||||
translate([0,0,0])
|
||||
%cylinder(r=20,h=40,center=true);
|
||||
color([1,0,0])
|
||||
writecylinder("rotate=90",[0,0,0],20,40,center=true,down=0,rotate=90);
|
||||
writecylinder("rotate = 30,east = 90",[0,0,0],20,40,center=true,down=0,rotate=30,east=90);
|
||||
writecylinder("ccw = true",[0,0,0],20,40,center=true,down=0,face="top",ccw=true);
|
||||
writecylinder("middle = 8",[0,0,0],20,40,h=3,center=true,down=0,face="top",middle=8);
|
||||
writecylinder("face = top",[0,0,0],20,40,center=true,down=0,face="top");
|
||||
writecylinder("east=90",[0,0,0],20,40,h=3,center=true,down=0,face="top",east=90);
|
||||
writecylinder("west=90",[0,0,0],20,40,h=3,center=true,down=0,face="top",ccw=true,west=90);
|
||||
writecylinder("face = bottom",[0,0,0],20,40,center=true,down=0,face="bottom");
|
||||
*/
|
||||
/*writesphere test
|
||||
sphere(20);
|
||||
color([1,0,0])
|
||||
writesphere("Hello World",[0,0,0],20,t=1,h=6);
|
||||
*/
|
||||
/* writecube test
|
||||
translate([30,30,30])
|
||||
cube([10,15,30],center=true);
|
||||
write("hello",center=true,rotate =30);
|
||||
color([1,0,0])
|
||||
writecube( "front",[30,30,30],[10,15,30],h=5,rotate=-90);
|
||||
color([0,1,0])
|
||||
writecube( "back",[30,30,30],size=[10,15,30],h=5,face="back",rotate=90,t=4);
|
||||
color([0,0,1])
|
||||
writecube( "left",[30,30,30],[10,15,30],h=5,face="left",up=5);
|
||||
color([1,1,0])
|
||||
writecube( "right",where=[30,30,30],size=[10,15,30],h=5,face="right",rotate=55);
|
||||
color([1,0,1])
|
||||
writecube( "top",where=[30,30,30],size=[10,15,30],h=5,face="top");
|
||||
color([1,1,1])
|
||||
writecube( "bttm",where=[30,30,30],size=[10,15,30],h=5,face="bottom",rotate=90);
|
||||
*/
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,80 @@
|
|||
/* Derived by Carlosgs from:
|
||||
* http://www.thingiverse.com/thing:12789
|
||||
* An extruder gear set for the TechZone Huxley,
|
||||
* featuring Herringbone teeth.
|
||||
* You will have to recalibrate your E_STEPS_PER_MM in
|
||||
* your firmware (ratio changing from original techzone
|
||||
* lasercut gears).
|
||||
* This use 2 modules from the MCAD library that you can
|
||||
* get from https://github.com/elmom/MCAD.
|
||||
*
|
||||
* Part - the motor gear mount hub with set screw hole -
|
||||
* derived from http://www.thingiverse.com/thing:3104
|
||||
* (thanks GilesBathgate) which is under GPL CC license.
|
||||
*
|
||||
* Copyright (C) 2011 Guy 'DeuxVis' P.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
|
||||
* --
|
||||
* DeuxVis - device@ymail.com */
|
||||
|
||||
include <MCAD/involute_gears.scad>
|
||||
|
||||
// Increase the resolution of default shapes
|
||||
$fa = 5; // Minimum angle for fragments [degrees]
|
||||
$fs = 0.5; // Minimum fragment size [mm]
|
||||
|
||||
/* Herringbone gear module, adapted from MCAD/involute_gears */
|
||||
module herringbone_gear( teeth=12, height=10, circles=0, shaft=5 ) {
|
||||
twist=0;//100;
|
||||
pressure_angle=30;
|
||||
|
||||
diam = teeth*2;
|
||||
|
||||
truncation_length = 2.8;
|
||||
truncation_height = height/2.5;
|
||||
|
||||
module myGear() {
|
||||
difference() {
|
||||
gear(
|
||||
number_of_teeth=teeth,
|
||||
circular_pitch=320,
|
||||
pressure_angle=pressure_angle,
|
||||
clearance = 0.2,
|
||||
gear_thickness = height/2,
|
||||
rim_thickness = height/2,
|
||||
rim_width = 1,
|
||||
hub_thickness = height/2,
|
||||
hub_diameter=1,
|
||||
bore_diameter=shaft,
|
||||
circles=circles,
|
||||
twist=twist/teeth
|
||||
);
|
||||
if (teeth>=10) {
|
||||
mirror([0,0,1]) translate([0,0,-height/2-0.01]) {
|
||||
difference() {
|
||||
cylinder(r=diam/2, h=truncation_height);
|
||||
translate([0,0,-0.01])
|
||||
cylinder(r1=diam/2-truncation_length, r2=diam/2+1, h=truncation_height+0.02);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
myGear();
|
||||
mirror( [0,0,1] )
|
||||
myGear();
|
||||
}
|
||||
Loading…
Reference in New Issue