From 9da33e0e09fe5a021fbe316d0ba12850a01133c3 Mon Sep 17 00:00:00 2001
From: carlosgs <carlosgarciasaura@gmail.com>
Date: Sat, 1 Jun 2013 12:50:59 +0200
Subject: [PATCH] Deleted file from old version

---
 Hardware/Y_axis/idle_stand.scad | 125 --------------------------------
 1 file changed, 125 deletions(-)
 delete mode 100644 Hardware/Y_axis/idle_stand.scad

diff --git a/Hardware/Y_axis/idle_stand.scad b/Hardware/Y_axis/idle_stand.scad
deleted file mode 100644
index 3587741..0000000
--- a/Hardware/Y_axis/idle_stand.scad
+++ /dev/null
@@ -1,125 +0,0 @@
-// Cyclone PCB Factory: a 3D printable CNC machine for PCB manufacture
-// Created by Carlosgs (http://carlosgs.es)
-// License: Attribution - Share Alike - Creative Commons (http://creativecommons.org/licenses/by-sa/3.0/)
-
-use <../libs/obiscad/bcube.scad>
-use <../libs/build_plate.scad>
-
-bottom_thickness = 4;
-base_width = 20;
-base_length = 25;
-base_screw_diameter = 5;
-
-motor_width = 43;
-motor_length = 49; // not used
-motor_screw_distance = 31.3;
-motor_center_diameter = 23;
-
-motor_screw_diameter = 3.7;
-motor_screw_head_diameter = 8;
-
-bearing_diameter = 22.4;
-M8_rod_diameter = 8.2;
-
-axis_distance = 32;
-
-wall_thickness = 5;
-wall_height = 45;
-wall_width = 70;
-
-idler_width = 25;
-
-module motor_stand_no_base(with_motor=true) {
-difference() {
-  translate([wall_height/2,wall_width/2,wall_thickness/2])
-    bcube([wall_height,wall_width,wall_thickness],cr=4,cres=10);
-
-  // Position relative to motor shaft
-  translate([motor_width/2,motor_width/2,wall_thickness/2]) {
-    if(with_motor) {
-    // Hole for the motor shaft
-    translate([0,-wall_width/2,0])
-      cube([20,wall_width,10*wall_thickness],cr=4,cres=10,center=true);
-    cylinder(r=motor_center_diameter/2,h=10*wall_thickness,center=true,$fn=40);
-
-    // Screws for holding the motor
-    for(i=[-1,1]) for(j=[-1,1])
-    translate([i*motor_screw_distance/2,j*motor_screw_distance/2,0]) {
-      cylinder(r=motor_screw_diameter/2,h=10*wall_thickness,center=true,$fn=40);
-      cylinder(r=motor_screw_head_diameter/2,h=10*wall_thickness,center=false,$fn=40);
-    }
-    } // End if with motor
-
-    // Bearing holes
-    rotate([0,0,15]) translate([0,axis_distance,0]) {
-      cylinder(r=(M8_rod_diameter*2)/2,h=10*wall_thickness,center=true,$fn=40);
-      cylinder(r=bearing_diameter/2,h=10*wall_thickness,center=false,$fn=60);
-
-    }
-
-  } // End of translate relative to motor shaft
-} // End of difference
-}
-
-module motor_stand(with_motor=true) {
-  union() {
-    motor_stand_no_base(with_motor);
-    difference() {
-      union() {
-        translate([wall_height-bottom_thickness,wall_width-base_width]) {
-          cube([bottom_thickness,base_width,base_length]);
-          hull() {
-            cube([bottom_thickness,5,base_length]);
-            translate([-18,0,0])
-              cube([0.001,5,0.001]);
-          }
-        }
-      }
-      // --- screws for the base ---
-      translate([wall_height,wall_width-5,15])
-        rotate([0,90,0]) {
-          translate([-5,0,0])
-            cylinder(r=base_screw_diameter/2,h=100,center=true,$fn=6);
-          translate([5,0,0])
-            cylinder(r=base_screw_diameter/2,h=100,center=true,$fn=6);
-        }
-    } // End of difference
-  }
-}
-
-
-module idle_stand() {
-  intersection() { // Remove the motor part
-    motor_stand(with_motor=false);
-    translate([wall_height/2,wall_width/2+35,wall_thickness/2])
-      bcube([wall_height,wall_width,100],cr=4,cres=10);
-  }
-}
-
-//for display only, doesn't contribute to final object
-build_plate(3,200,200);
-
-//motor_stand();
-idle_stand();
-translate([0,105,0])
-    mirror([0,1,0])
-    difference() {
-      union() {
-        translate([wall_height-bottom_thickness,wall_width-base_width]) {
-          cube([bottom_thickness,base_width,base_length]);
-          hull() {
-            cube([bottom_thickness,5,base_length]);
-            translate([-18,0,0])
-              cube([0.001,5,0.001]);
-          }
-        }
-      }
-      // --- screws for the base ---
-      translate([wall_height,wall_width-5,15])
-        rotate([0,90,0]) {
-          translate([-5,0,0])
-            cylinder(r=base_screw_diameter/2,h=100,center=true,$fn=6);
-          translate([5,0,0])
-            cylinder(r=base_screw_diameter/2,h=100,center=true,$fn=6);
-        }
-    }