Fixed X carriage

Hardware/CYCLONE_2/Cyclone.scad

@@ -186,7 +186,7 @@ render_2D_or_3D() {
 			translate([axes_Xcarriage_pos,0,0]) {
 				if(draw_references) %frame();
 				
-				Cyclone_X_carriage();
+				!Cyclone_X_carriage();
 				
 				// TRANSLATE REFERENCE POSITION to the Z axis origin (right smooth rod)
 				translate([-axes_Zsmooth_separation/2,axes_Zreference_posY,axes_Zreference_height]) {

Hardware/CYCLONE_2/Cyclone_X_carriage.scad

@@ -121,8 +121,6 @@ module Cyclone_X_carriage() {
 				Cyclone_XsubPart_ZnutHolder(mainPart=true);
 		}
 		
-		#frame(100);
-		
 		// ----- Hole for the spindle tool ------
 		translate([0,-35+8.5,0])
 			cylinder(r=35/2, h=100, center=true);

Hardware/CYCLONE_2/INHERITED/vacuum_cleaner_attachment.scad

@@ -0,0 +1,126 @@
+
+
+dremel_accessory_diam = 20;
+dremel_accesory_height = 12-2;
+
+aspirator_thickness_thick = 2;
+aspirator_thickness_slim = 2;
+aspirator_thickness_screw = 4;
+
+aspirator_tube_diam = 20;
+aspirator_tube_holder_height = 15;
+
+aspirator_hole_height = 20;
+aspirator_hole_diam = 32.5-0.5;
+
+dremel_accessory_tube_offset = 0;//dremel_accessory_diam-aspirator_tube_diam;
+aspirator_tube_separation = aspirator_tube_diam+aspirator_thickness_screw*2+1.5;
+dremel_accessory_hole_offset = 0;//dremel_accessory_diam-aspirator_hole_diam;
+
+vacuum_cleaner_diam = 32.5;
+vacuum_cleaner_tube_len = 40;
+
+// Useful MCAD functions reference
+
+//use <MCAD/motors.scad>
+//stepper_motor_mount(nema_standard=17, slide_distance=10, $fn=40, mochup=true);
+
+//use <MCAD/boxes.scad>
+//roundedBox([10,20,30], radius=2, sidesonly=false, $fn=60);
+
+//include <MCAD/stepper.scad>
+//motor(Nema17, size=NemaMedium, dualAxis=false);
+
+
+//use <MCAD/teardrop.scad>
+//teardrop(radius=10, length=20, angle=90);
+
+//use <MCAD/nuts_and_bolts.scad>
+//nutHole(size=3, tolerance=0.5, proj=-1);
+//boltHole(size=3, length=10, tolerance=0.5, proj=-1, $fn=40);
+
+use <MCAD/teardrop.scad>
+use <MCAD/nuts_and_bolts.scad>
+
+module aspirator_accessory_2Dshape() {
+	hull() {
+		translate([aspirator_tube_separation/2,-dremel_accessory_tube_offset/2])
+			circle(r=aspirator_thickness_thick+aspirator_tube_diam/2, h=dremel_accesory_height, $fn=60);
+		translate([-aspirator_tube_separation/2,-dremel_accessory_tube_offset/2])
+			circle(r=aspirator_thickness_thick+aspirator_tube_diam/2, h=dremel_accesory_height, $fn=60);
+	}
+}
+
+module aspirator_accessory_filledshape() {
+	linear_extrude(height=dremel_accesory_height,center=true)
+		aspirator_accessory_2Dshape();
+	hull() {
+		translate([0,0,-dremel_accesory_height/2])
+			linear_extrude(height=0.001,center=true)
+				aspirator_accessory_2Dshape();
+		translate([0,dremel_accessory_hole_offset/2,-dremel_accesory_height/2-aspirator_hole_height])
+			linear_extrude(height=0.001,center=true)
+				circle(r=aspirator_thickness_slim+aspirator_hole_diam/2, $fn=60);
+	}
+	hull() {
+		translate([0,0,-dremel_accesory_height/2-aspirator_hole_height])
+			linear_extrude(height=0.001,center=true)
+				circle(r=aspirator_thickness_slim+aspirator_hole_diam/2, $fn=60);
+		translate([0,0,-dremel_accesory_height/2-aspirator_hole_height-vacuum_cleaner_tube_len])
+			linear_extrude(height=0.001,center=true)
+				circle(r=aspirator_thickness_slim+vacuum_cleaner_diam/2, $fn=60);
+	}
+}
+
+module aspirator_accessory_2Dholes() {
+	translate([aspirator_tube_separation/2,-dremel_accessory_tube_offset/2])
+		circle(r=aspirator_tube_diam/2, $fn=60);
+	translate([-aspirator_tube_separation/2,-dremel_accessory_tube_offset/2])
+		circle(r=aspirator_tube_diam/2, $fn=60);
+}
+
+module screwHole() {
+	translate([0,-5,0])
+		rotate([90,0,0])
+		hull() {
+		translate([0,0,20])
+			nutHole(size=3, tolerance=0.5, proj=-1);
+		nutHole(size=3, tolerance=0.5, proj=-1);
+		}
+	translate([0,aspirator_tube_diam/2,0])
+		rotate([90,0,0])
+			boltHole(size=3, length=30, tolerance=0.4, proj=-1, $fn=40);
+}
+
+module aspirator_accessory_holes() {
+	linear_extrude(height=dremel_accesory_height+0.01,center=true)
+		aspirator_accessory_2Dholes();
+	hull() {
+		translate([0,0,-dremel_accesory_height/2+0.01])
+			linear_extrude(height=0.001,center=true)
+				aspirator_accessory_2Dholes();
+		translate([0,dremel_accessory_hole_offset/2,-dremel_accesory_height/2-aspirator_hole_height+1-0.01])
+			linear_extrude(height=0.001,center=true)
+				circle(r=aspirator_hole_diam/2, $fn=60);
+	}
+	hull() {
+		translate([0,0,-dremel_accesory_height/2-aspirator_hole_height+0.01])
+			linear_extrude(height=0.001,center=true)
+				circle(r=aspirator_hole_diam/2, $fn=60);
+		translate([0,0,-dremel_accesory_height/2-aspirator_hole_height-vacuum_cleaner_tube_len-0.01])
+			linear_extrude(height=0.001,center=true)
+				circle(r=vacuum_cleaner_diam/2, $fn=60);
+	}
+	translate([0,dremel_accessory_hole_offset/2,-dremel_accesory_height/2-aspirator_hole_height])
+			linear_extrude(height=2+0.1,center=true)
+				circle(r=aspirator_hole_diam/2, $fn=60);
+	// Hole for the tightener
+	cube([aspirator_tube_separation,2.5,dremel_accesory_height+0.01],center=true);
+	// Holes for the nut/screws
+	#screwHole();
+}
+
+difference() {
+	aspirator_accessory_filledshape();
+	aspirator_accessory_holes();
+}

Hardware/CYCLONE_2/INHERITED/vacuum_cleaner_attachment_2.scad

@@ -0,0 +1,125 @@
+
+
+
+dremel_accessory_diam = 20;
+dremel_accesory_height = 12-2;
+
+aspirator_thickness_thick = 2;
+aspirator_thickness_slim = 1;
+aspirator_thickness_screw = 4;
+
+aspirator_tube_diam = 20;
+aspirator_tube_holder_height = 15;
+
+aspirator_hole_height = 15;
+aspirator_hole_diam = 35;
+
+dremel_wrench_diam = 0;
+dremel_wrench_hole_offset = 8;
+
+dremel_accessory_screw_separation = dremel_accessory_diam+aspirator_thickness_screw+0.8;
+dremel_accessory_angle = 0;
+
+dremel_accessory_tube_offset = dremel_accessory_diam-aspirator_tube_diam;
+aspirator_tube_separation = dremel_accessory_diam+aspirator_tube_diam+aspirator_thickness_screw*2+1.5;
+dremel_accessory_hole_offset = 0;//dremel_accessory_diam-aspirator_hole_diam;
+
+// Useful MCAD functions reference
+
+//use <MCAD/motors.scad>
+//stepper_motor_mount(nema_standard=17, slide_distance=10, $fn=40, mochup=true);
+
+//use <MCAD/boxes.scad>
+//roundedBox([10,20,30], radius=2, sidesonly=false, $fn=60);
+
+//include <MCAD/stepper.scad>
+//motor(Nema17, size=NemaMedium, dualAxis=false);
+
+
+//use <MCAD/teardrop.scad>
+//teardrop(radius=10, length=20, angle=90);
+
+//use <MCAD/nuts_and_bolts.scad>
+//nutHole(size=3, tolerance=0.5, proj=-1);
+//boltHole(size=3, length=10, tolerance=0.5, proj=-1, $fn=40);
+
+use <MCAD/teardrop.scad>
+use <MCAD/nuts_and_bolts.scad>
+
+module aspirator_accessory_2Dshape() {
+	hull() {
+		translate([aspirator_tube_separation/2,-dremel_accessory_tube_offset/2])
+			circle(r=aspirator_thickness_thick+aspirator_tube_diam/2, h=dremel_accesory_height, $fn=60);
+		circle(r=aspirator_thickness_thick+dremel_accessory_diam/2, h=dremel_accesory_height, $fn=60);
+		translate([-aspirator_tube_separation/2,-dremel_accessory_tube_offset/2])
+			circle(r=aspirator_thickness_thick+aspirator_tube_diam/2, h=dremel_accesory_height, $fn=60);
+	}
+}
+
+module aspirator_accessory_filledshape() {
+	linear_extrude(height=dremel_accesory_height,center=true)
+		aspirator_accessory_2Dshape();
+	hull() {
+		translate([0,0,-dremel_accesory_height/2])
+			linear_extrude(height=0.001,center=true)
+				aspirator_accessory_2Dshape();
+		translate([0,dremel_accessory_hole_offset/2,-dremel_accesory_height/2-aspirator_hole_height])
+			linear_extrude(height=0.001,center=true)
+				circle(r=aspirator_thickness_slim+aspirator_hole_diam/2, $fn=60);
+	}
+}
+
+module aspirator_accessory_2Dholes() {
+	translate([aspirator_tube_separation/2,-dremel_accessory_tube_offset/2])
+		circle(r=aspirator_tube_diam/2, $fn=60);
+	circle(r=dremel_accessory_diam/2, $fn=60);
+	translate([-aspirator_tube_separation/2,-dremel_accessory_tube_offset/2])
+		circle(r=aspirator_tube_diam/2, $fn=60);
+}
+
+module screwHole() {
+	translate([0,-7,0])
+		rotate([90,0,0])
+		hull() {
+		translate([0,0,20])
+			nutHole(size=3, tolerance=0.5, proj=-1);
+		nutHole(size=3, tolerance=0.5, proj=-1);
+		}
+	translate([0,aspirator_tube_diam/2,0])
+		rotate([90,0,0])
+			boltHole(size=3, length=30, tolerance=0.4, proj=-1, $fn=40);
+}
+
+module aspirator_accessory_holes() {
+	linear_extrude(height=dremel_accesory_height+0.01,center=true)
+		aspirator_accessory_2Dholes();
+	hull() {
+		translate([0,0,-dremel_accesory_height/2+0.01])
+			linear_extrude(height=0.001,center=true)
+				aspirator_accessory_2Dholes();
+		translate([0,dremel_accessory_hole_offset/2,-dremel_accesory_height/2-aspirator_hole_height+1-0.01])
+			linear_extrude(height=0.001,center=true)
+				circle(r=aspirator_hole_diam/2, $fn=60);
+	}
+	translate([0,dremel_accessory_hole_offset/2,-dremel_accesory_height/2-aspirator_hole_height])
+			linear_extrude(height=2+0.1,center=true)
+				circle(r=aspirator_hole_diam/2, $fn=60);
+	// Hole for the tightener
+	translate([0,-dremel_accessory_tube_offset/4,0])
+		cube([aspirator_tube_separation,2.5,dremel_accesory_height+0.01],center=true);
+	// Frontal hole for the wrench
+	translate([0,(dremel_accessory_diam+aspirator_thickness_thick)/2,-(dremel_accesory_height+aspirator_hole_height)/2-dremel_wrench_hole_offset])
+		cube([dremel_wrench_diam,10,aspirator_hole_height+0.01],center=true);
+	// Holes for the nut/screws
+	#translate([dremel_accessory_screw_separation/2,0,0])
+		rotate([0,0,-dremel_accessory_angle])
+			screwHole();
+	#translate([-dremel_accessory_screw_separation/2,0,0])
+		rotate([0,0,dremel_accessory_angle])
+			screwHole();
+}
+
+difference() {
+	aspirator_accessory_filledshape();
+	aspirator_accessory_holes();
+}