a2nr
/
cyclone-pcb-factory
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Set the original Marlin buffering settings

pull/1/head
carlosgs 2013-05-25 19:08:26 +02:00
parent 04fd7a40aa
commit 8813153068
1 changed files with 4 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
Firmware/Marlin_Cyclone_MOD/Marlin/Configuration_adv.h
View File

@ -145,7 +145,7 @@
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again: //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
#define X_HOME_RETRACT_MM 3 #define X_HOME_RETRACT_MM 3
#define Y_HOME_RETRACT_MM 3 #define Y_HOME_RETRACT_MM 3
#define Z_HOME_RETRACT_MM 1 #define Z_HOME_RETRACT_MM 1.5
//#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially. //#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially.
#define AXIS_RELATIVE_MODES {false, false, false, false} #define AXIS_RELATIVE_MODES {false, false, false, false}
@ -178,7 +178,7 @@
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
// of the buffer and all stops. This should not be much greater than zero and should only be changed // of the buffer and all stops. This should not be much greater than zero and should only be changed
// if unwanted behavior is observed on a user's machine when running at very slow speeds. // if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0//0.05// (mm/sec) // CGS MOD: Since Cyclone will be running at slow speeds, this value has been set to zero #define MINIMUM_PLANNER_SPEED 0.05//0.05// (mm/sec) // CGS MOD: Since Cyclone will be running at slow speeds, this value has been set to zero
// MS1 MS2 Stepper Driver Microstepping mode table // MS1 MS2 Stepper Driver Microstepping mode table
#define MICROSTEP1 LOW,LOW #define MICROSTEP1 LOW,LOW
@ -274,13 +274,13 @@ const unsigned int dropsegments=5; //everything with less than this number of st
#if defined SDSUPPORT #if defined SDSUPPORT
#define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
#else #else
#define BLOCK_BUFFER_SIZE 4 // maximize block buffer // CGS MOD: Reduced the buffering to reduce jitter when stopping the machine and prevent damage #define BLOCK_BUFFER_SIZE 16 // maximize block buffer // CGS MOD: Should we reduce the buffering to minimize jitter when stopping the machine and prevent damage
#endif #endif
//The ASCII buffer for recieving from the serial: //The ASCII buffer for recieving from the serial:
#define MAX_CMD_SIZE 96 #define MAX_CMD_SIZE 96
#define BUFSIZE 4 // CGS MOD: Reduced the buffering to reduce jitter when stopping the machine and prevent damage #define BUFSIZE 16 // CGS MOD: Should we reduce the buffering to minimize jitter when stopping the machine and prevent damage?
// Firmware based and LCD controled retract // Firmware based and LCD controled retract