From 2b54546e0a0cebad090629c15e1450ada624c428 Mon Sep 17 00:00:00 2001 From: Carlos Garcia Saura Date: Mon, 29 Dec 2014 02:12:01 +0100 Subject: [PATCH] Updated README --- README.md | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-) diff --git a/README.md b/README.md index 387e6d2..f7b9dac 100644 --- a/README.md +++ b/README.md @@ -6,9 +6,9 @@ Read this, it's important! =========================== -If you are reading this, then you are looking at the development version of Cyclone PCB Factory. +If you are reading this, then you are looking at the **development version** of Cyclone PCB Factory. This means files may present inconsistencies (dimensions mismatch, lack of tolerances, etc). -If you just want to build the machine, take a look at the following locations: +**If you just want to build the machine, take a look at the following locations:** - **Releases: ** - **Documentation: ** @@ -42,7 +42,7 @@ Install git (http://git-scm.com/) onto your system. Then run a clone: This will download the latest sources into a directory named 'Cyclone-PCB-Factory'. -Version 2.0 +Version 2.1 (Unstable, Work In Progress) -- **Cyclone PCB Factory V2.0 was developed in the department of innovation and robotics at [bq](http://www.bq.com/)** @@ -62,8 +62,8 @@ V2.0 addresses all the issues from the original design, and implementing improve Future improvements: -- -* Endstop integration for Z (integrated probe) -* Re-implement the Z carriage, currently inherited from Cyclone V1 +* Endstop integration for Z (integrated probe?) +* Re-implement/Improve the Z carriage, currently inherited from Cyclone V1

@@ -94,9 +94,9 @@ Videos Bill of materials (obsolete, to be updated and moved to the RepRap wiki page) -- -Kobus' -Robsbots' -Carlosgs' +- Kobus' +- Robsbots' +- Carlosgs' (consumables) More pictures @@ -124,12 +124,15 @@ License: **Attribution - Share Alike - Creative Commons ()** is the original author of V2.0. -**Many other people keeps contributing to the project (check "most active posters" at ).** +**Carlos García Saura ()** released the project as open-source and is the current maintainer. + +**Many other people keeps contributing to the project (check GitHub contributions and "most active posters" at ).** Special thanks -- -- Plenty of feedback from **Pedro de Oro**, **Alberto Valero**, **Alberto Mendez** (and **Obijuan**, **Pacle**, **Jesus**, **Ana**, **Santi**, **Antonio**, **Jose**... :-P) at the _department of innovation and robotics at [bq](http://www.bq.com/)_. **Cyclone is much more user-friendly thanks to you!** +- **Arne Durr (D-Byte)** finished the OpenScad assembly and made the code much more parametric. +- Plenty of feedback from **Pedro de Oro**, **Alberto Valero**, **Alberto Mendez** (and **Obijuan**, **Pacle**, **Jesus**, **Ana**, **Santi**, **Antonio**, **Jose**... :-P) at the _department of innovation and robotics at [bq](http://www.bq.com/)_. **Cyclone is much more user-friendly thanks to you!** +- **Glen Chung** () improved the OpenScad code quite a lot (a much more elegant code), providing a great start point for V2.0. - Z axis concepts by **Quim Borras** and the spindle motor holder by **Misan** were really useful!! Also, **Diego Viejo**'s machine was of great inspiration for the Z axis () **Thank you all!!** - This design woudn't have been possible without the encouragement of the **Panda CNC community** () - Also, thanks to **Juan González-Gómez (Obijuan )** for naming the machine Cyclone :)