Create motor_stand_m8rod_mirror.scad
yOPERO
parent
4b48b83641
commit
0c131b2aac
|
|
@ -0,0 +1,178 @@
|
|||
// Cyclone PCB Factory: a 3D printable CNC machine for PCB manufacture
|
||||
// Created by Carlosgs (http://carlosgs.es)
|
||||
// License: Attribution - Share Alike - Creative Commons (http://creativecommons.org/licenses/by-sa/3.0/)
|
||||
// History:
|
||||
// - (05/25/2013) Added @yopero's four screw suggestion for the motor stand
|
||||
// - (05/28/2013) Added @yopero's four screw suggestion for the idle stand
|
||||
|
||||
use <../libs/obiscad/bcube.scad>
|
||||
use <../libs/build_plate.scad>
|
||||
|
||||
bottom_thickness = 4;
|
||||
base_width = 20;
|
||||
base_length = 25;
|
||||
base_screw_diameter = 5;
|
||||
|
||||
motor_width = 43;
|
||||
motor_length = 49; // not used
|
||||
motor_screw_distance = 31.3;
|
||||
motor_center_diameter = 23;
|
||||
|
||||
motor_screw_diameter = 3.7;
|
||||
motor_screw_head_diameter = 8;
|
||||
|
||||
motor_adjust_margin = 3;
|
||||
|
||||
bearing_diameter = 21.8;
|
||||
M8_rod_diameter = 8.2;
|
||||
|
||||
axis_distance = 32;
|
||||
|
||||
wall_thickness = 5;
|
||||
wall_height = 45;
|
||||
wall_width = 70;
|
||||
|
||||
idler_width = 25;
|
||||
|
||||
wall_extraWidth_left = base_width+5;
|
||||
wall_extraWidth_right = 5;
|
||||
|
||||
totalWallWidth = wall_width+wall_extraWidth_left+wall_extraWidth_right;
|
||||
|
||||
module motorHolesY() {
|
||||
// Hole for the motor shaft
|
||||
hull() {
|
||||
translate([0,motor_adjust_margin/2,0])
|
||||
cylinder(r=motor_center_diameter/2,h=10*wall_thickness,center=true,$fn=40);
|
||||
translate([0,-motor_adjust_margin/2,0])
|
||||
cylinder(r=motor_center_diameter/2,h=10*wall_thickness,center=true,$fn=40);
|
||||
}
|
||||
|
||||
// Screws for holding the motor
|
||||
for(i=[-1,1]) for(j=[-1,1])
|
||||
translate([i*motor_screw_distance/2,j*motor_screw_distance/2,0]) {
|
||||
hull() {
|
||||
translate([0,motor_adjust_margin/2,0])
|
||||
cylinder(r=motor_screw_diameter/2,h=10*wall_thickness,center=true,$fn=40);
|
||||
translate([0,-motor_adjust_margin/2,0])
|
||||
cylinder(r=motor_screw_diameter/2,h=10*wall_thickness,center=true,$fn=40);
|
||||
}
|
||||
hull() {
|
||||
translate([0,motor_adjust_margin/2,0])
|
||||
cylinder(r=motor_screw_head_diameter/2,h=10*wall_thickness,center=false,$fn=40);
|
||||
translate([0,-motor_adjust_margin/2,0])
|
||||
cylinder(r=motor_screw_head_diameter/2,h=10*wall_thickness,center=false,$fn=40);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
module motor_stand_no_base(with_motor=true) {
|
||||
difference() {
|
||||
union(){
|
||||
translate([wall_height/2,totalWallWidth/2-wall_extraWidth_left,wall_thickness/2])
|
||||
bcube([wall_height,totalWallWidth,wall_thickness],cr=4,cres=10);
|
||||
//Extra with for the stand
|
||||
translate([wall_height/2,totalWallWidth/2-wall_extraWidth_left,-wall_thickness/2])
|
||||
bcube([wall_height,totalWallWidth,wall_thickness*2],cr=4,cres=10);
|
||||
}
|
||||
// Position relative to motor shaft
|
||||
translate([motor_width/2,motor_width/2,wall_thickness/2]) {
|
||||
|
||||
if(with_motor)
|
||||
motorHolesY();
|
||||
|
||||
// Bearing holes
|
||||
rotate([0,0,15]) translate([0,axis_distance,0]) {
|
||||
#cylinder(r=(M8_rod_diameter*2)/2,h=100*wall_thickness,center=true,$fn=40);
|
||||
cylinder(r=bearing_diameter/2,h=10*wall_thickness,center=false,$fn=60);
|
||||
}
|
||||
|
||||
//Threaded rods
|
||||
#translate([0,-64,0])rotate([0,0,15]) translate([0,axis_distance,0]) {
|
||||
cylinder(r=(M8_rod_diameter)/2,h=100*wall_thickness,center=true,$fn=40);
|
||||
}
|
||||
|
||||
|
||||
} // End of translate relative to motor shaft
|
||||
} // End of difference
|
||||
}
|
||||
|
||||
module holder(h=35,noScrews=false,base_width_inc=0) {
|
||||
difference() {
|
||||
union() {
|
||||
translate([wall_height-bottom_thickness,0]) {
|
||||
if(!noScrews) cube([bottom_thickness,base_width+base_width_inc,base_length]);
|
||||
hull() {
|
||||
cube([bottom_thickness,5,base_length]);
|
||||
translate([-h,0,0])
|
||||
cube([0.001,5,0.001]);
|
||||
}
|
||||
}
|
||||
}
|
||||
// --- screws for the base ---
|
||||
if(!noScrews) translate([wall_height,base_width/2+2.5,15])
|
||||
rotate([0,90,0]) {
|
||||
translate([-5,0,0])
|
||||
cylinder(r=base_screw_diameter/2,h=100,center=true,$fn=7);
|
||||
translate([5,0,0])
|
||||
cylinder(r=base_screw_diameter/2,h=100,center=true,$fn=7);
|
||||
}
|
||||
} // End of difference
|
||||
}
|
||||
module motor_stand_base(){
|
||||
union(){
|
||||
translate([0,wall_width]) holder(noScrews=true);
|
||||
translate([0,52.4-5/2]) holder(h=15,base_width_inc=1);
|
||||
}}
|
||||
|
||||
module motor_stand(with_motor=true) {
|
||||
union() {
|
||||
motor_stand_no_base(with_motor);
|
||||
translate([0,wall_width])
|
||||
holder(noScrews=true);
|
||||
translate([0,-wall_width/3-1.67])
|
||||
holder(h=25,noScrews=true);
|
||||
|
||||
translate([0,52.4-5/2])
|
||||
holder(h=15,base_width_inc=1);
|
||||
translate([0,0])
|
||||
scale([1,-1,1])
|
||||
holder(h=15,base_width_inc=1);
|
||||
|
||||
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
module idle_stand() {
|
||||
union() {
|
||||
intersection() { // Remove the motor part
|
||||
motor_stand(with_motor=false);
|
||||
translate([wall_height/2,wall_width/2+52.4-(wall_width+wall_extraWidth_right-52.4),wall_thickness/2])
|
||||
bcube([wall_height,wall_width,100],cr=4,cres=10);
|
||||
}
|
||||
translate([0,wall_width+5-2*(wall_width+wall_extraWidth_right-52.4)]) holder(noScrews=true);
|
||||
translate([0,52.4+5/2]) scale([1,-1,1]) holder(h=15,base_width_inc=1);
|
||||
}
|
||||
}
|
||||
|
||||
module motor_stand_front(){
|
||||
motor_stand();
|
||||
}
|
||||
module motor_stand_back(){
|
||||
translate([0,0,-140])
|
||||
rotate([0,180,0])
|
||||
mirror([1,0,0]){
|
||||
motor_stand();
|
||||
}
|
||||
}
|
||||
//for display only, doesn't contribute to final object
|
||||
//build_plate(3,200,200);
|
||||
|
||||
|
||||
|
||||
motor_stand_front();
|
||||
motor_stand_back();
|
||||
|
||||
|
||||
}
|
||||
Loading…
Reference in New Issue