cyclone-pcb-factory/Source_files/Cycl_X_carriage.scad

259 lines
12 KiB
OpenSCAD
Raw Normal View History

// This file is part of Cyclone PCB Factory: an open-source 3D printable CNC machine for PCB manufacture
// http://reprap.org/wiki/Cyclone_PCB_Factory
// Original author: Carlosgs (http://carlosgs.es)
// License: CC BY-SA 4.0 (Attribution-ShareAlike 4.0 International, http://creativecommons.org/licenses/by-sa/4.0/)
// Designed with http://www.openscad.org/
2014-08-04 23:49:12 +07:00
2014-07-28 07:13:32 +07:00
use <libs/linear_bearing.scad>
module Cyclone_X_carriage() {
2014-07-28 07:13:32 +07:00
linearBearingModel = "LM8UU";
linearBearingLength = linearBearing_L(linearBearingModel);
linearBearingDiameter = linearBearing_D(linearBearingModel);
2014-07-28 22:19:32 +07:00
// Correction is needed to account for 3D printer tolerances
axes_effective_Xsmooth_separation = axes_Xsmooth_separation-0.5;
2014-07-28 22:19:32 +07:00
2014-07-28 07:13:32 +07:00
linearBearingSeparation = 0;
2014-08-04 23:49:12 +07:00
sideExtensions = linearBearingDiameter/3+2;
2014-07-28 07:13:32 +07:00
ZrodHolderLength = 30;
2014-08-04 23:49:12 +07:00
screwSize = 3; // M3, M4, etc (integers only)
screwLength = linearBearingDiameter+sideExtensions;
screwAditionalLength = 2;
screwExtension = screwSize*1.2;
2014-07-28 07:13:32 +07:00
linearBearingLengthExtension = 6+max(axes_Zsmooth_rodD+axes_Zsmooth_separation-2*linearBearingLength-linearBearingSeparation, linearBearingSeparation);
dimX = 2*linearBearingLength+linearBearingLengthExtension;
2014-08-04 23:49:12 +07:00
module Cyclone_XsubPart_ZnutHolder(holes=false) {
2014-08-05 06:30:06 +07:00
rod_nut_len = 0.8*axes_Zthreaded_rodD;
2014-08-04 23:49:12 +07:00
rodTolerance = 0.5;
rodSize = 8; // M3, M4, etc (integers only)
2014-08-05 06:30:06 +07:00
dimZ = rod_nut_len+3; // Nut holder thickness
2014-08-04 23:49:12 +07:00
if(!holes) {
rotate([0,180,0])
hull() {
cylinder(r=axes_Zthreaded_rodD+1, h=dimZ);
translate([0,-axes_Zreference_posY-axes_ZthreadedReference_posY+axes_effective_Xsmooth_separation,dimZ/2])
cube([dimX,0.1,dimZ], center=true);
}
} else {
// Hole for the main Z nut
2014-09-06 17:07:27 +07:00
translate([0,0,0.1]) rotate([90,0,0]) hole_for_nut(size=rodSize,nutAddedLen=0,captiveLen=0, tolerance=0.2);
2014-08-04 23:49:12 +07:00
// Hole for the Z threaded rod
translate([0,0,-axes_effective_Xsmooth_separation+dimZ])
rotate([90,0,0]) standard_rod(diam=axes_Zthreaded_rodD+rodTolerance, length=axes_effective_Xsmooth_separation*2, threaded=true, renderPart=true, center=true);
translate([0,0,-dimZ-0.01]) rotate([180,0,0]) cylinder(r=axes_Zthreaded_rodD*0.9, h=axes_effective_Xsmooth_separation+dimZ*2, $fn=6);
2014-08-04 23:49:12 +07:00
}
}
2014-07-28 22:19:32 +07:00
2014-08-05 06:30:06 +07:00
module Cyclone_XsubPart_XnutHolder(holes=false) {
rod_nut_len = 0.8*axes_Xthreaded_rodD;
rodTolerance = 0.5;
rodSize = 8; // M3, M4, etc (integers only)
2014-09-09 23:02:20 +07:00
washer_D = 15.8-0.5;
washer_thickness = 1.6-0.9;
2014-08-05 06:30:06 +07:00
holderExtension = 10;
armWidth = axes_Xthreaded_rodD*2+6;
armThickness = 30;
if(!holes) {
// Main shape
translate([armThickness/2,0,-axes_effective_Xsmooth_separation/2+holderExtension])
rotate([0,90,0]) bcube([axes_effective_Xsmooth_separation,armWidth,armThickness], cr=3,cres=10);
*translate([32/2,0,0])
rotate([180,0,0]) rotate([0,0,90]) Cyclone_YsubPart_nutHolder();
} else {
if(draw_references) %frame();
2014-09-09 23:02:20 +07:00
translate([-rod_nut_len/2+1,0,0]) rotate([0,0,-90]) rotate([180,0,0]) {
// Hole for the main nut
hull() {
rotate([0,180,0]) hole_for_nut(size=rodSize,nutAddedLen=0,captiveLen=axes_Xthreaded_rodD*3,rot=90,tolerance=0.1);
translate([0,-3.25,0])
rotate([0,180,0]) hole_for_nut(size=rodSize-2,nutAddedLen=0,captiveLen=axes_Xthreaded_rodD*3,rot=90,tolerance=0.1);
}
2014-09-09 23:02:20 +07:00
translate([0,3,0])
hull() {
rotate([0,180,0]) hole_for_nut(size=rodSize,nutAddedLen=0,captiveLen=axes_Xthreaded_rodD*3,rot=90,tolerance=0.1);
translate([0,4,0])
rotate([0,180,0]) hole_for_nut(size=rodSize+2,nutAddedLen=0,captiveLen=axes_Xthreaded_rodD*3,rot=90,tolerance=0.1);
}
// Hole for the sliding nut
translate([0,-rod_nut_len-3-washer_thickness/2,0]) hull() {
rotate([0,180,0]) hole_for_nut(size=rodSize,nutAddedLen=armThickness,captiveLen=axes_Xthreaded_rodD*3,rot=90,tolerance=0.3);
translate([0,-2.25,0])
rotate([0,180,0]) hole_for_nut(size=rodSize,nutAddedLen=armThickness,captiveLen=axes_Xthreaded_rodD*3,rot=90,tolerance=0.3);
}
// Hole for the rod
rotate([0,180,0])hole_for_nut(size=rodSize-2,nutAddedLen=armThickness,captiveLen=axes_Xthreaded_rodD*3,rot=90,tolerance=0.1);
}
// Hole for the washer
2014-09-09 23:02:20 +07:00
translate([rod_nut_len/2+3+1,0,0]) rotate([0,0,-90]) rotate([180,0,0])
hull() {
hull() {
washer_single(diam=washer_D, thickness=washer_thickness, renderPart=true, tolerance=0.3);
translate([0,0,-holderExtension*2])
washer_single(diam=washer_D, thickness=washer_thickness, renderPart=true, tolerance=0.3);
}
hull() {
washer_single(diam=rodSize, thickness=4.5+washer_thickness, renderPart=true, tolerance=0.3);
translate([0,0,-holderExtension*2])
washer_single(diam=rodSize, thickness=4.5+washer_thickness, renderPart=true, tolerance=0.3);
}
}
*translate([-0.01+rod_nut_len/2+6,0,0])
hull() {
rotate([0,0,-90]) hole_for_nut(size=rodSize,nutAddedLen=-1.25,captiveLen=axes_Xthreaded_rodD*3,rot=90,tolerance=0.1);
translate([2,0,0])
rotate([0,0,-90]) hole_for_nut(size=rodSize-2,nutAddedLen=0,captiveLen=axes_Xthreaded_rodD*3,rot=90,tolerance=0.1);
}
*translate([armThickness+0.01,0,0])
rotate([0,0,-90]) hole_for_nut(size=rodSize-2,nutAddedLen=armThickness,captiveLen=axes_Xthreaded_rodD*3,rot=90,tolerance=0.1);
}
}
module Cyclone_XsubPart_XnutHolder_SINGLE_NUT(holes=false) {
rod_nut_len = 0.8*axes_Xthreaded_rodD;
rodTolerance = 0.5;
rodSize = 8; // M3, M4, etc (integers only)
washer_D = 15.8;
washer_thickness = 1.6;
2014-08-05 06:30:06 +07:00
armWidth = axes_Xthreaded_rodD*2+5;
armThickness = rod_nut_len*2;
if(!holes) {
translate([armThickness/2,0,-axes_effective_Xsmooth_separation/2+washer_D/2])
rotate([0,90,0]) bcube([axes_effective_Xsmooth_separation,armWidth,armThickness], cr=3,cres=10);
} else {
if(draw_references) %frame();
translate([-0.01+rod_nut_len/2+6,0,0])
2014-08-05 06:30:06 +07:00
hull() {
rotate([0,0,-90]) hole_for_nut(size=8,nutAddedLen=-1.25,captiveLen=axes_Xthreaded_rodD*3,rot=90,tolerance=0.1);
2014-08-05 06:30:06 +07:00
translate([2,0,0])
rotate([0,0,-90]) hole_for_nut(size=6,nutAddedLen=0,captiveLen=axes_Xthreaded_rodD*3,rot=90,tolerance=0.1);
2014-08-05 06:30:06 +07:00
}
translate([armThickness+0.01,0,0])
rotate([0,0,-90]) hole_for_nut(size=6,nutAddedLen=armThickness,captiveLen=axes_Xthreaded_rodD*3,rot=90,tolerance=0.1);
2014-08-05 06:30:06 +07:00
}
}
2014-09-06 17:07:27 +07:00
module Cyclone_XsubPart_XendstopBumper() {
XendBumper_x = 5;
XendBumper_y = 53;
XendBumper_z = 12;
XendBumper_D = 15;
translate([XendBumper_x/2, XendBumper_y/2-axes_Xsmooth_separation/2, -XendBumper_z/2-linearBearingDiameter/2]) {
rotate([0,90,0]) bcube([XendBumper_z,XendBumper_y,XendBumper_x], cr=XendBumper_z/2-0.01, cres=10);
translate([0,XendBumper_y/2-XendBumper_z/2,0])
rotate([0,90,0]) cylinder(r=XendBumper_D/2, h=XendBumper_x, center=true);
//rotate([0,90,0]) bcube([XendBumper_z,XendBumper_y,XendBumper_x], cr=XendBumper_z/2-0.01, cres=10);
}
}
color(color_movingPart) difference() {
2014-08-04 23:49:12 +07:00
// Main shape
union() {
hull() {
2014-07-28 07:13:32 +07:00
rotate([0,90,0])
2014-08-04 23:49:12 +07:00
bcube([linearBearingDiameter,linearBearingDiameter+sideExtensions, dimX], cr=3, cres=5);
translate([0,axes_effective_Xsmooth_separation,axes_effective_Xsmooth_separation])
rotate([0,90,0])
bcube([linearBearingDiameter+sideExtensions,linearBearingDiameter, dimX], cr=3, cres=5);
}
translate([0,0,-screwExtension/2])
rotate([0,90,0])
bcube([linearBearingDiameter+screwExtension,linearBearingDiameter+sideExtensions, dimX], cr=3, cres=5);
translate([0,axes_effective_Xsmooth_separation+screwExtension/2,axes_effective_Xsmooth_separation])
rotate([0,90,0])
bcube([linearBearingDiameter+sideExtensions,linearBearingDiameter+screwExtension, dimX], cr=3, cres=5);
// Bottom right screw
translate([-linearBearingLength/2-linearBearingSeparation/2,0,-linearBearingDiameter/2-screwExtension/2])
rotate([90,0,0]) cylinder(r=screwSize*2,h=screwLength, center=true, $fn=6);
// Bottom left screw
translate([linearBearingLength/2+linearBearingSeparation/2,0,-linearBearingDiameter/2-screwExtension/2])
rotate([90,0,0]) cylinder(r=screwSize*2,h=screwLength, center=true, $fn=6);
// Top screw
translate([0,axes_effective_Xsmooth_separation+screwExtension/2+linearBearingDiameter/2,axes_effective_Xsmooth_separation])
cylinder(r=screwSize*2,h=screwLength, center=true, $fn=6);
2014-08-05 06:30:06 +07:00
// Z nut holder
2014-08-04 23:49:12 +07:00
translate([0,axes_Zreference_posY+axes_ZthreadedReference_posY,axes_effective_Xsmooth_separation+(linearBearingDiameter+sideExtensions)/2])
Cyclone_XsubPart_ZnutHolder(holes=false);
2014-08-05 06:30:06 +07:00
// X nut holder
translate([-dimX/2,axes_effective_Xsmooth_separation,0])
rotate([-135,0,0]) Cyclone_XsubPart_XnutHolder(holes=false);
2014-09-06 17:07:27 +07:00
// X endstop bumper
translate([-dimX/2,axes_effective_Xsmooth_separation,axes_effective_Xsmooth_separation])
Cyclone_XsubPart_XendstopBumper();
2014-08-04 23:49:12 +07:00
}
// ----- Hole for the Z carriage space ------
difference() {
translate([-dimX/2-0.5,0,-sideExtensions+ZrodHolderLength])
cube([dimX+1,axes_Zreference_posY+axes_ZthreadedReference_posY,axes_effective_Xsmooth_separation]);
2014-08-04 23:49:12 +07:00
translate([0,axes_Zreference_posY+axes_ZthreadedReference_posY,axes_effective_Xsmooth_separation+(linearBearingDiameter+sideExtensions)/2])
Cyclone_XsubPart_ZnutHolder(mainPart=true);
2014-07-28 07:13:32 +07:00
}
// ----- Hole for the spindle tool ------
translate([0,-35+8.5,0])
cylinder(r=34/2, h=100, center=true);
2014-07-28 07:13:32 +07:00
// ----- Holes for the linear bearings ------
// Bottom right linear bearing
translate([-linearBearingLength/2-linearBearingSeparation/2,0,0])
2014-08-04 23:49:12 +07:00
rotate([0,0,90]) linearBearingHole(model=linearBearingModel, lateralExtension=sideExtensions*2+screwExtension*2, lengthExtension=linearBearingLengthExtension);
2014-07-28 07:13:32 +07:00
// Bottom left linear bearing
translate([linearBearingLength/2+linearBearingSeparation/2,0,0])
2014-08-04 23:49:12 +07:00
rotate([0,0,90]) linearBearingHole(model=linearBearingModel, lateralExtension=sideExtensions*2+screwExtension*2, lengthExtension=linearBearingLengthExtension);
2014-07-28 07:13:32 +07:00
// Top linear bearing
2014-07-28 22:19:32 +07:00
translate([0,axes_effective_Xsmooth_separation,axes_effective_Xsmooth_separation])
2014-08-04 23:49:12 +07:00
rotate([90,0,0]) rotate([0,0,90]) linearBearingHole(model=linearBearingModel, lateralExtension=sideExtensions*2+screwExtension*2, lengthExtension=linearBearingLength+linearBearingLengthExtension+linearBearingSeparation);
// ----- Holes for the screws ------
// Bottom right screw
translate([-linearBearingLength/2-linearBearingSeparation/2,-screwLength/2-screwAditionalLength/2,-linearBearingDiameter/2-screwExtension/2])
rotate([0,0,180]) hole_for_screw(size=screwSize,length=screwLength+screwAditionalLength,nutDepth=0,nutAddedLen=0,captiveLen=0);
// Bottom left screw
translate([linearBearingLength/2+linearBearingSeparation/2,-screwLength/2-screwAditionalLength/2,-linearBearingDiameter/2-screwExtension/2])
rotate([0,0,180]) hole_for_screw(size=screwSize,length=screwLength+screwAditionalLength,nutDepth=0,nutAddedLen=0,captiveLen=0);
// Top screw
translate([0,axes_effective_Xsmooth_separation+screwExtension/2+linearBearingDiameter/2,axes_effective_Xsmooth_separation+screwLength/2+screwAditionalLength/2])
rotate([90,0,0]) hole_for_screw(size=screwSize,length=screwLength+screwAditionalLength,nutDepth=0,nutAddedLen=0,captiveLen=0);
2014-08-05 06:30:06 +07:00
// ----- Hole for the Z nut ------
2014-08-04 23:49:12 +07:00
translate([0,axes_Zreference_posY+axes_ZthreadedReference_posY,axes_effective_Xsmooth_separation+(linearBearingDiameter+sideExtensions)/2])
2014-08-05 06:30:06 +07:00
Cyclone_XsubPart_ZnutHolder(holes=true);
// ----- Hole for the X nut ------
translate([-dimX/2,axes_effective_Xsmooth_separation,0])
rotate([-135,0,0]) Cyclone_XsubPart_XnutHolder(holes=true);
2014-07-28 07:13:32 +07:00
// ----- Holes for the rods ------
// TRANSLATE REFERENCE POSITION to the Z axis origin (right smooth rod)
translate([-axes_Zsmooth_separation/2,axes_Zreference_posY,axes_Zreference_height]) {
// Z smooth rod (right)
2014-08-04 23:49:12 +07:00
cylinder(r=axes_Zsmooth_rodD/2, h=axes_Zsmooth_rodLen);
2014-07-28 07:13:32 +07:00
// Z smooth rod (left)
translate([axes_Zsmooth_separation,0,0])
2014-08-04 23:49:12 +07:00
cylinder(r=axes_Zsmooth_rodD/2, h=axes_Zsmooth_rodLen);
2014-07-28 07:13:32 +07:00
}
}
2014-07-28 22:19:32 +07:00
// Draw linear bearings
rotate([0,90,0]) linearBearing_single(model=linearBearingModel, echoPart=true);
rotate([0,-90,0]) linearBearing_single(model=linearBearingModel, echoPart=true);
translate([linearBearingLength/2,axes_effective_Xsmooth_separation,axes_effective_Xsmooth_separation])
2014-08-05 06:30:06 +07:00
rotate([0,-90,0]) linearBearing_single(model=linearBearingModel, echoPart=true);
}