25 lines
1.2 KiB
Markdown
25 lines
1.2 KiB
Markdown
|
Description
|
||
|
|
--------
|
||
|
|
This is a patch of Marlin by ErikZalm (https://github.com/ErikZalm/Marlin) that adds probing command (G30) with the functions developed by larsbrubaker (https://github.com/ErikZalm/Marlin/pull/323)
|
||
|
|
|
||
|
|
The changes made (marked as _CGS MOD_) are hereby released on the public domain.
|
||
|
|
|
||
|
|
Quick Information
|
||
|
|
===================
|
||
|
|
You must setup two endstops for the Z axis, the lower one is considered our "probe"
|
||
|
|
|
||
|
|
_Pin definitions (from "pins.h")_
|
||
|
|
<pre>
|
||
|
|
<code>
|
||
|
|
// We are using the Z_MIN endstop as a probe
|
||
|
|
// Also, we have our Z_MAX endstop to limit the vertical movement of the spindle
|
||
|
|
#define Z_PROBE_PIN 27 // using Sanguinololu, pin 36 (D27) , labeled A4
|
||
|
|
#define Z_PROBE_HIT_VALUE 0 // Switch this if your probe gives an inverted value
|
||
|
|
</code>
|
||
|
|
</pre>
|
||
|
|
|
||
|
|
Disclaimer
|
||
|
|
===================
|
||
|
|
This hardware/software is provided “as is," and you use the hardware/software at your own risk. Under nocircumstances shall Carlosgs be liable for direct, indirect, special, incidental, or consequential damages resulting from the use, misuse, or inability to use this hardware/software, even if Carlosgs has been advised of the possibility of such damages.
|
||
|
|
|