41 lines
1.3 KiB
Markdown
41 lines
1.3 KiB
Markdown
|
Cyclone-PCB-console
|
||
|
|
===================
|
||
|
|
|
||
|
|
Controller for the Cyclone PCB Factory
|
||
|
|
|
||
|
|
_**Cyclone PCB console v0.1**_
|
||
|
|
|
||
|
|
DESCRIPTION:
|
||
|
|
|
||
|
|
Controller for the Cyclone PCB Factory:
|
||
|
|
"a 3D printable CNC machine for PCB manufacture" (http://www.thingiverse.com/thing:49484)
|
||
|
|
This software has been tested with a Sanguinololu board running a modified Marlin firmware
|
||
|
|
that supports the G30 probing G-code.
|
||
|
|
|
||
|
|
AUTHOR:
|
||
|
|
|
||
|
|
Carlosgs (http://carlosgs.es)
|
||
|
|
|
||
|
|
LICENSE:
|
||
|
|
|
||
|
|
Attribution - Share Alike - Creative Commons (http://creativecommons.org/licenses/by-sa/3.0/)
|
||
|
|
|
||
|
|
DISCLAIMER:
|
||
|
|
|
||
|
|
This software is provided “as is," and you use the software at your own risk. Under no
|
||
|
|
circumstances shall Carlosgs be liable for direct, indirect, special, incidental, or
|
||
|
|
consequential damages resulting from the use, misuse, or inability to use this software,
|
||
|
|
even if Carlosgs has been advised of the possibility of such damages.
|
||
|
|
|
||
|
|
CREDIT:
|
||
|
|
|
||
|
|
This script was created using as a base:
|
||
|
|
"Upload GCode to SpereBot" by Tgfuellner http://www.thingiverse.com/thing:9941 (CC-BY-SA)
|
||
|
|
Please refer to http://carlosgs.es for more information on this probing method
|
||
|
|
|
||
|
|
REQUISITE:
|
||
|
|
|
||
|
|
http://pyserial.sourceforge.net
|
||
|
|
Installation on Ubuntu: sudo aptitude install python-serial
|
||
|
|
|